Refine Your Search

Topic

Search Results

Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) Premium Quality for Bearing Applications, Double Vacuum Melted

2019-09-24
WIP
AMS5749G
This specification covers a premium aircraft-quality, corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, and forging stock.<p>These products have been used typically for parts requiring a through-hardening, corrosion-resistant steel, operating under heavy loads at high speeds, requiring resistance to wear and softening at elevated temperatures, and subject to very rigid inspection standards, but usage is not limited to such applications.
Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, and Rings 5.0Mn - 22Cr - 12.5Ni - 2.2Mo - 0.20Cb - 0.30N - 0.20V Solution Heat Treated

2019-09-24
WIP
AMS5764F
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, extrusions, flash welded rings, and stock for forging, extruding, or flash welded rings.

These produces have been used typically for parts requiring excellent corrosion resistance and high strength from -423 degrees to +1100 degrees F (-253 degrees to +593 degrees C) and for welded parts without subsequent heat treatment, but usage is not limited to such applications.

Standard

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 74Ni - 7.0Cr - 16.5Mo, Solution Heat Treated

2019-09-24
WIP
AMS5771G
This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings. These products have been used typically for parts, such as turbine air-sealing components, requiring moderate strength up to 1400 °F (760 °C) and oxidation resistance up to 1600 °F (871 °C), particularly where a low coefficient of expansion is desirable, but usage is not limited to such applications.
Standard

Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings, 50Ni 20Cr 20Co 5.8Mo 2.2Ti 0.45Al Consumable Electrode or Vacuum Induction Melted 2100°F (1149°C) Solution Heat Treated

2019-09-24
WIP
AMS5886D
This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings. These products have been used typically for parts requiring high strength up to 1500 degrees F (816 degrees C) and oxidation resistance up to 2000 degrees F (1093 degrees C), particularly those parts which are formed or welded and then heat treated to develop required properties, but usage is not limited to such applications.
Standard

Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength

2019-09-24
WIP
AMS5911C
This specification covers a corrosion-resistant steel in the form of sheet and strip. These products have been used typically for applications requiring moderate forming and bending, but usage is not limited to such applications. Mechanical properties specified herein are obtained by cold working (strain hardening), and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion-resistance before, during, or after fabrication.
Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable

2019-09-24
WIP
AMS5629J
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, flash welded rings, and extrusions 12 inches (305 mm) and under in nominal diameter, thickness or for hexagons, least distance between parallel sides, and stock of any size for forging, flash welded rings, or extrusion (see 8.7).
Standard

Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength

2019-09-24
WIP
AMS5902D
This specification covers a corrosion-resistant steel in the form of sheet and strip. These products have been used typically in fabrication of aircraft structural components requiring moderate forming and bending, but usage is not limited to such applications. Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.
Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5 Cu

2019-09-24
WIP
AMS5659T
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, flash welded rings, and extrusions in the solution heat treated condition (see 8.3) 12 inches (305 mm) and under in nominal diameter, thickness or for hexagons, least distance between parallel sides, and having a maximum cross-sectional area of 144 in2 (930 cm2), and stock of any size for forging, flash welded rings, or extruding (see 8.6).
Standard

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 60.5Ni - 23Cr - 14Fe - 1.4Al Annealed

2019-09-23
WIP
AMS5715G
This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings. These products have been used typically for parts requiring corrosion and oxidation resistance up to 2200 °F (1204 °C) and where such parts may require welding during fabrication, but usage is not limited to such applications.
Standard

Steel, Corrosion Resistant, Sheet and Strip, 18Cr - 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa) Tensile Strength

2019-09-23
WIP
AMS5519P
This specification covers a corrosion-resistant steel in the form of sheet and strip. These products have been used typically for parts requiring moderate drawing or forming and high strength, but usage is not limited to such applications. Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.
X