Search Results

Standard

Accessory Drive Tensioner Test Standards

2024-04-10

WIP

J2436

Update typo from: 4.3.9 Spray frequency: (1) application per hour (Moderate Test: eight (8) applications per hour) to: 4.3.9 Spray frequency: (1) application per hour (Moderate Test: (1) application every (8) hours)

Standard

V-Ribbed Belts and Pulleys

2022-05-16

CURRENT

J1459_202205

This SAE Standard covers the dimensioning technique, tolerances, and methods of measurement of V-ribbed belts and mating pulleys for use on automotive accessory drives.

Standard

Performance Testing of PK Section V-Ribbed Belts

2021-11-09

CURRENT

J2432_202111

The following information covers accessory drive belt testing methods and includes test configurations, pulley diameters, power loads, and guidance for interpreting test data. Belt construction definitions are also documented. This information has been prepared from existing literature, including standards and data supplied by producers and users of V-ribbed belts.

Standard

Automotive V-Ribbed Belt Drives and Test Methods

2019-09-24

CURRENT

J1596_201909

The following information covers engine accessory drive layout details and testing methods and includes test configurations, pulley diameters, power loads, and guidance for interpreting test data. This information has been prepared from existing literature, including standards and data supplied by both producers and users of V-ribbed belts.

Standard

Performance Testing of PK Section V-Ribbed Belts

2015-03-13

HISTORICAL

J2432_201503

The following information covers accessory drive belt testing methods and includes test configurations, pulley diameters, power loads, and guidance for interpreting test data. Belt construction definitions are also documented. This information has been prepared from existing literature, including standards and data supplied by Producers and Users of V-ribbed belts.

Standard

Automotive V-Belt Drives

2012-08-14

CURRENT

J637_201208

The following information is intended as a guide to be used for evaluating belt construction, source approval, and quality audit. This recommendation has been prepared from existing literature, including standards, specifications, and data supplied by both producers and users. These recommendations cover drive layout details and V-belt testing methods, including test layout, pulley diameters, torque loads, and guidance for interpreting test data. The application of these automotive V-belts is to power engine or vehicle accessories that are physically attached to the engine.

Standard

Automotive Synchronous Belt Drives

2012-08-14

CURRENT

J1313_201208

The following information applies to automotive camshaft drives, distributor drives, or other underhood drives that may require synchronization. For other power transmission drives requiring synchronization, refer to Specifications for Drives using Synchronous Belts (MXL, XL, L, H, XH and XXH belt sections) (IP 24/1978), published jointly by the Rubber Manufacturers Association (RMA), the Mechanical Power Transmission Association (MPTA), and the Rubber Association of Canada (RAC).

Standard

SI (Metric) Synchronous Belts and Pulleys

2012-07-05

CURRENT

J1278_201207

Synchronous belt drives consist of a toothed belt which mates with grooved pulleys to provide a precise speed ratio between the driver and driven pulleys. This SAE Standard covers the synchronous belt and pulley sections currently in use in automotive applications such as camshaft, distributor, and other underhood drives that may require synchronization. It also provides for future sections to be added as usage develops.

Standard

V-Ribbed Belts and Pulleys

2009-12-18

HISTORICAL

J1459_200912

This SAE Standard covers the dimensioning technique, tolerances, and methods of measurement of V-ribbed belts and mating pulleys for use on automotive accessory drives.

Standard

Automotive V-Belt Drives

2001-12-10

HISTORICAL

J637_200112

The following information is intended as a guide to be used for evaluating belt construction, source approval, and quality audit. This recommendation has been prepared from existing literature, including standards, specifications, and data supplied by both producers and users. These recommendations cover drive layout details and V-belt testing methods, including test layout, pulley diameters, torque loads, and guidance for interpreting test data. The application of these automotive V-belts is to power engine or vehicle accessories that are physically attached to the engine.

Standard

V-Belts and Pulleys

2001-12-10

HISTORICAL

J636_200112

This specification covers standard dimensions, tolerances, and methods of measurement of V-belts and pulleys for automotive V-belt drives.

Standard

V-Ribbed Belts and Pulleys

2001-09-07

HISTORICAL

J1459_200109

This SAE Standard covers the dimensioning technique, tolerances, and methods of measurement of V-ribbed belts and mating pulleys for use on automotive accessory drives.

Standard

AUTOMOTIVE V-BELT DRIVES

1997-08-01

HISTORICAL

J637_199708

The following information is intended as a guide to be used for evaluating belt construction, source approval, and quality audit. This recommendation has been prepared from existing literature, including standards, specifications, and data supplied by both producers and users. These recommendations cover drive layout details and V-belt testing methods, including test layout, pulley diameters, torque loads, and guidance for interpreting test data. The application of these automotive V-belts is to power engine or vehicle accessories that are physically attached to the engine.

Standard

V-BELTS AND PULLEYS

1997-08-01

HISTORICAL

J636_199708

This specification covers standard dimensions, tolerances, and methods of measurement of V-belts and pulleys for automotive V-belt drives.

Standard

SI (METRIC) SYNCHRONOUS BELTS AND PULLEYS

1993-03-29

HISTORICAL

J1278_199303

Synchronous belt drives consist of a toothed belt which mates with grooved pulleys to provide a precise Speed ratio between the driver and driven pulleys. This SAE Standard covers the synchronous belt and pulley sections currently in use in automotive applications such as camshaft, distributor, and other underhood drives that may require synchronization. It also provides for future sections to be added as usage develops. Table 1 lists the sections currently in use.

Standard

AUTOMOTIVE SYNCHRONOUS BELT DRIVES

1993-03-01

HISTORICAL

J1313_199303

The following information applies to automotive camshaft drives, distributor drives, or other underhood drives that may require synchronization. For other power transmission drives requiring synchronization, refer to Specifications for Drives using Synchronous Belts (MXL, XL, L, H, XH, and XXH belt sections) (IP 24/1978), published jointly by the Rubber Manufacturers Association (RMA), the Mechanical Power Transmission Association (MPTA), and the Rubber Association of Canada (RAC).

Standard

V-BELTS AND PULLEYS

1992-05-01

HISTORICAL

J636_199205

This specification covers standard dimensions, tolerances, and methods of measurement of V-belts and pulleys for automotive V-belt drives.

Standard

AUTOMOTIVE V-RIBBED BELT DRIVES AND TEST METHODS

1989-06-01

HISTORICAL

J1596_198906

The following information covers engine accessory drive layout details and testing methods and includes test configurations, pulley diameters, power loads, and guidance for interpreting test data. This information has been prepared from existing literature, including standards and data supplied by both producers and users of V-ribbed belts. When the engine is used to drive an external unit equipped with industrial type V-pulleys and belts, it is recommended that the power takeoff pulley on the engine be grooved according to the appropriate industrial standard. These standards are published by RMA-MPTA (Rubber Manufacturers Association - Mechanical Power Transmission Association); ISO (International Standards Organization) and ASAE (American Society of Agricultural Engineers).

Standard

AUTOMOTIVE V-BELT DRIVES

1989-02-01

HISTORICAL

J637_198902

The following information is intended as a guide to be used for evaluating belt construction, source approval, and quality audit. This recommendation has been prepared from existing literature, including standards, specifications and data supplied by both producers and users. These recommendations cover drive layout details and V-belt testing methods, including test layout, pulley diameters, torque loads, and guidance for interpreting test data. The application of these automotive V-belts is to power engine or vehicle accessories that are physically attached to the engine.

Standard

V-RIBBED BELTS AND PULLEYS

1988-08-01

HISTORICAL

J1459_198808

This standard covers dimensions, tolerances, and methods of measurement of V-ribbed belts and pulleys for use on automotive1 drives.