Refine Your Search

Date

Date

Metals Standard Forming Logistics Brake Linings Standards Committee

Search Results

Viewing 1 to 16 of 16
1
Sort by published
Standard

Brake Lining Quality Test Procedure
2021-10-26
CURRENT
J661_202110
The purpose of this SAE Recommended Practice is to establish a uniform laboratory procedure for securing and reporting the friction and wear characteristics of brake linings. The performance data obtained can be used for in-plant quality control by brake lining manufacturers and for the quality assessment of incoming shipments by the purchasers of brake linings.
Standard

Friction Coefficient Identification and Environmental Marking System for Brake Linings
2019-03-11
CURRENT
J866_201903
This SAE Recommended Practice is intended to provide a uniform means of identification which may be used to classify the friction coefficient of brake linings, based on data obtained from tests conducted in accordance with SAE J661 Brake Lining Quality Test Procedure and SAE J2975 Measurement of Copper and other elements in Brake Friction Materials. NOTE: It is emphasized that this document does not establish friction requirements for brake linings, nor does it designate significant characteristics of brake linings which must be considered in overall brake performance. Due to other factors that include brake system design and operating environment, the friction codes obtained from this document cannot reliably be used to predict brake system performance.
Standard

Specific Gravity of Friction Material
2017-02-02
CURRENT
J380_201702
Specific gravity is a nondestructive test used as a quality control check of the consistency of formulation and processing of brake lining. The specific gravity and the range of specific gravity are peculiar to each formulation and, therefore, the acceptable values or range must be established for each formulation by the manufacturer. Specific gravity alone shows nothing about a materials in use performance. The specific gravity of sintered metal powder friction materials, particularly those which have steel backing members, is usually determined somewhat differently. Reference ASTM B 376.
Standard

Measurement of Disc Brake Friction Material Underlayer Distribution
2016-05-24
CURRENT
J2724_201605
This procedure describes a method for measuring the fraction of underlayer (also referred to as backing layer) existing at any given height above the a disc brake friction materials shoe plate. Measuring underlayer distribution is useful for computing useable lining thickness and for friction material quality management.
Standard

Hardness of Brake Lining
2015-08-27
CURRENT
J2654_201508
Hardness measurements are used as a quality control check of the consistency of formulation and processing of brake linings. This hardness method is nondestructive. NOTE—This method is not a measure of friction level. The hardness and the range of hardness are characteristic of each formulation; therefore, the acceptable values and ranges must be established for each formulation and may be affected by processing. NOTE—The hardness of sintered powder metal lining is usually determined with Rockwell superficial hardness equipment. (See ASTM B 347)
Standard

Brake Lining Quality Test Procedure
2012-11-01
HISTORICAL
J661_201211
The purpose of this SAE Recommended Practice is to establish a uniform laboratory procedure for securing and reporting the friction and wear characteristics of brake linings. The performance data obtained can be used for in-plant quality control by brake lining manufacturers and for the quality assessment of incoming shipments by the purchasers of brake linings.
Standard

Friction Coefficient Identification and Environmental Marking System for Brake Linings
2012-07-16
HISTORICAL
J866_201207
This SAE Recommended Practice is intended to provide a uniform means of identification which may be used to classify the friction coefficient of brake linings, based on data obtained from tests conducted in accordance with SAE J661 Brake Lining Quality Test Procedure and SAE J2975 Measurement of Copper and other elements in Brake Friction Materials. NOTE: It is emphasized that this document does not establish friction requirements for brake linings, nor does it designate significant characteristics of brake linings which must be considered in overall brake performance. Due to other factors that include brake system design and operating environment, the friction codes obtained from this document cannot reliably be used to predict brake system performance.
Standard

Hardness of Brake Lining
2012-04-19
HISTORICAL
J2654_201204
Hardness measurements are used as a quality control check of the consistency of formulation and processing of brake linings. This hardness method is nondestructive. The hardness and the range of hardness are characteristic of each formulation; therefore, the acceptable values and ranges must be established for each formulation and may be affected by processing.
Standard

Measurement of Disc Brake Friction Material Underlayer Distribution
2012-04-19
HISTORICAL
J2724_201204
This procedure describes a method for measuring the fraction of underlayer (also referred to as backing layer) existing at any given height above the a disc brake friction materials shoe plate. Measuring underlayer distribution is useful for computing useable lining thickness and for friction material quality management.
Standard

Friction Coefficient Identification and Environmental Marking System for Brake Linings
2012-01-16
HISTORICAL
J866_201201
This SAE Recommended Practice is intended to provide a uniform means of identification which may be used to classify the friction coefficient of brake linings, based on data obtained from tests conducted in accordance with SAE J661 Chase Test and SAE J2975 Measurement of Copper and other elements in Brake Friction Materials.
Standard

Specific Gravity of Friction Material
2009-08-26
HISTORICAL
J380_200908
Specific gravity is a nondestructive test used as a quality control check of the consistency of formulation and processing of brake lining. The specific gravity and the range of specific gravity are peculiar to each formulation and, therefore, the acceptable values or range must be established for each formulation by the manufacturer. Specific gravity alone shows nothing about a materials in use performance. The specific gravity of sintered metal powder friction materials, particularly those which have steel backing members, is usually determined somewhat differently. Reference ASTM B 376.
Standard

Hardness of Brake Lining
2004-08-16
HISTORICAL
J2654_200408
Hardness measurements are used as a quality control check of the consistency of formulation and processing of brake linings. This hardness method is nondestructive. The hardness and the range of hardness are characteristic of each formulation; therefore, the acceptable values and ranges must be established for each formulation and may be affected by processing.
Standard

SPECIFIC GRAVITY OF BRAKE LINING
1993-02-01
HISTORICAL
J380_199302
Specific gravity is a nondestructive test used as a quality control check of the consistency of formulation and processing of brake lining. Specific gravity alone shows nothing about a lining's ability to develop friction or to resist fade when used as a friction element in brakes. Specific gravity varies with the formulation of the lining. The specific gravity of sintered metal powder linings, particularly those which have steel backing members, is usually determined somewhat differently. Reference ASTM B 376. The specific gravity and the range of specific gravity are peculiar to each formulation and, therefore, the acceptable values or range must be established for each formulation by the manufacturer.
Standard

SPECIFIC GRAVITY OF BRAKE LINING
1971-08-01
HISTORICAL
J380_197108
Specific gravity is a nondestructive test used as a quality control check of the consistency of formulation and processing of brake lining. Specific gravity alone shows nothing about a lining’s ability to develop friction or to resist fade when used as a friction element in brakes. Specific gravity varies with the formulation of the lining. The specific gravity of sintered metal powder linings, particularly those which have steel backing members, is usually determined somewhat differently. Reference ASTM B 376, ‘Density of Sintered Metal Friction Material’ (latest revision).1 The specific gravity and the range of specific gravity are peculiar to each formulation and, therefore, the acceptable values or range must be established for each formulation by the manufacturer.
Standard

DETERMINING THE SPECIFIC GRAVITY OF BRAKE LININGS
1969-02-01
HISTORICAL
J380_196902
Specific gravity is a nondestructive test used as a quality control check of the consistency of formulation and processing of brake lining. Specific gravity alone shows nothing about a lining’s ability to develop friction or to resist fade when used as a friction element in brakes. Specific gravity varies with the formulation of the lining. The specific gravity of sintered metal powder linings, particularly those which have steel backing members, is usually determined somewhat differently. Reference ASTM B 376 “Density of Sintered Metal Friction Material” (latest revision).1 The specific gravity and the range of specific gravity are peculiar to each formulation and, therefore, the acceptable values or range must be established for each formulation by the manufacturer.
1
X