Refine Your Search

Date

Date

Topic

Topic

Nickel Forming Filter Test Methods Standards Committee Standard Lubricating oils Vehicle dynamics Materials properties Logistics No Topic Selected

Search Results

Viewing 1 to 20 of 37
12Next >Last >>
Sort by published
Standard

Fuel Filter - Initial Single-Pass Efficiency Test Method
2023-12-13
CURRENT
J1985_202312
This SAE Standard is intended for all sizes of fuel filters, so a variety of test stands may be required depending upon flow rate. The low contamination level, downstream clean-up filter, and short duration of the test ensure that the particle retention ability of the filter is measured in a single pass, as no appreciable loading or regression will occur.
Standard

Fuel Dispensing Filter Test Methods
2020-05-26
CURRENT
J2793_202005
This SAE Recommended Practice is applicable to gasoline and diesel fuel filters installed on fuel dispensing equipment, mobile or stationary. It describes a set of tests used to characterize the structural integrity, filtration performance, and reaction to water contaminant with fuel dispensing filters.
Standard

Standard Oil Filter Test Oil
2019-01-16
CURRENT
J1260_201901
This SAE Standard defines the requirements for an oil to be used in the SAE HS 806 Oil Filter Test Procedures.
Standard

Coolant Filter Test Procedure
2019-01-16
CURRENT
J2709_201901
This SAE Recommended Practice is applicable to coolant filters installed on mobile or stationary equipment. It describes a body of tests used to characterize the stuctural integrity and filtration performance of coolant filters.
Standard

Standard Fuel Filter Test Fluid
2017-04-18
CURRENT
J1696_201704
This SAE Standard defines the requirements for fluid to be used in the SAE Fuel Filter Test Procedures.
Standard

Fuel Filter - Initial Single-Pass Efficiency Test Method
2013-10-07
HISTORICAL
J1985_201310
This SAE Standard is intended for all sizes of fuel filters, so a variety of test stands may be required depending upon flow rate. The low contamination level, downstream clean-up filter, and short duration of the test, ensures that the particle retention ability of the filter is measured in a single pass as no appreciable loading or regression will occur.
Standard

Standard Oil Filter Test Oil
2012-10-15
HISTORICAL
J1260_201210
This SAE Standard defines the requirements for an oil to be used in the SAE HS 806 Oil Filter Test Procedures.
Standard

Coolant Filter Test Procedure
2012-10-10
HISTORICAL
J2709_201210
This SAE Recommended Practice is applicable to coolant filters installed on mobile or stationary equipment. It describes a body of tests used to characterize the stuctural integrity and filtration performance of coolant filters.
Standard

Filter-Base Mounting
2012-05-29
CURRENT
J363_201205
This SAE Recommended Practice identifies the necessary dimensional characteristics of filter-base mounting configurations to accept the more commonly used lubricating oil and diesel fuel spin-on filters. This SAE document is basically equivalent to the ISO 6415-1981 and ISO 7654-1983 except for differences detailed in the Rationale.
Standard

Fuel Dispensing Filter Test Methods
2011-02-04
HISTORICAL
J2793_201102
This SAE Recommended Practice is applicable to gasoline and diesel fuel filters installed on fuel dispensing equipment, mobile or stationary. It describes a set of tests used to characterize the structural integrity, filtration performance, and reaction to water contaminant with fuel dispensing filters.
Standard

Emulsified Water/Fuel Separation Test Procedure
2010-10-22
CURRENT
J1488_201010
To determine the ability of a fuel/water separator to separate emulsified or finely dispersed water from fuels. This test method is applicable for biodiesel fuel.
Standard

Coarse Droplet Water/Fuel Separation Test Procedure
2010-10-20
CURRENT
J1839_201010
To determine the undissolved water removal performance of a fuel/water separator under controlled laboratory conditions, using water droplets. This test method is applicable for diesel and biodiesel fuel.
Standard

Standard Oil Filter Test Oil
2007-08-07
HISTORICAL
J1260_200708
This SAE Standard defines the requirements for an oil to be used in the SAE HS 806 Oil Filter Test Procedures.
Standard

Coolant Filter Test Procedure
2007-04-23
HISTORICAL
J2709_200704
This SAE Recommended Practice is applicable to coolant filters installed on mobile or stationary equipment. It describes a body of tests used to characterize the stuctural integrity and filtration performance of coolant filters.
Standard

Fuel Filter—Initial Single-Pass Efficiency Test Method
2006-08-09
HISTORICAL
J1985_200608
This SAE Standard is intended for all sizes of fuel filters, so a variety of test stands may be required depending upon flow rate. The low contamination level, downstream clean-up filter, and short duration of the test, ensures that the particle retention ability of the filter is measured in a single pass as no appreciable loading or regression will occur.
Standard

Full Flow Lubricating Oil Filters Multipass Method for Evaluating Filtration Performance
2002-06-27
CURRENT
J1858_200206
This standard establishes a multipass filtration performance test with continuous contaminant injection for lubricating oil filter elements. It also includes a procedure for determining the contaminant capacity, particulate removal characteristics, and pressure loss. It also includes a test currently applicable to lubricating oil filter elements which exhibit a 10 µm filtration ratio of less than 75 and a rated flow between 4 and 600 L/min. This standard provides a test procedure which yields reproducible test data for evaluating the filtration performance of a lubricating oil filter element.
12Next >Last >>
X