Refine Your Search

Date

Date

Topic

Topic

Standard Logistics Glazing Materials Standards Committee Materials Nickel

Search Results

Viewing 1 to 20 of 45
123Next >Last >>
Sort by published
Standard

Automotive Safety Glazing Materials
2021-07-16
CURRENT
J673_202107
This SAE Recommended Practice is a guidance document, which covers current safety glazing materials applicable for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included. This guidance document does not precede or replace customer specifications and requirements.
Standard

Intrusion Resistance of Safety Glazing Systems for Road Vehicles
2020-10-19
CURRENT
J2568_202010
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/attachment/vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard

Spectral Transmission Test
2020-03-11
CURRENT
J1796_202003
The scope of this SAE performance standard is to define the test method by which the direct solar and visible transmittance of safety glazing materials for road vehicles shall be measured. Adherence to this performance standard will facilitate writing, use, and referencing of reports by government, industry, and other organizations.
Standard

Luminous Reflectance in Safety Glazing Materials for Road Vehicles
2020-03-11
CURRENT
J2134_202003
The scope of this SAE performance standard is to provide a simple, practical, and broadly applicable test procedure for appraising luminous Illuminant A reflectance of reflecting safety glazing materials for road vehicles. This SAE performance standard, which provides a simple test procedure widely used in the optics field, may be used to measure the reflectivity which films applied to safety glazing materials for road vehicles may enhance. This test procedure applies to conditions where feasibility, rather than accuracy of measurement, is of prime importance. Measurements can be made outside laboratories in a quality control environment and in similar applications, when glazings, instead of small test specimens, have to be tested.
Standard

Plastic Motor Vehicle Safety Glazing - Tolerances and Fabrication Details
2019-04-11
CURRENT
J1691_201904
This SAE Recommended Practice is intended to cover plastic safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are presented principally for the guidance of body engineers and designers. For additional information on plastic safety glazing materials for use in motor vehicles and motor vehicle equipment, please refer to SAE J673.
Standard

Automotive Safety Glazing Materials
2015-06-18
HISTORICAL
J673_201506
This SAE Recommended Practice is intended to cover current safety glazing practice applicable to safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included principally for the guidance of body engineers and designers.
Standard

Safety Glazing Materials - Motor Vehicles and Motor Vehicle Equipment
2013-09-23
CURRENT
J674_201309
All safety glazing materials used in motor vehicles and motor vehicle equipment operating on land highways should comply with the requirements of the American National Standard, ANSI/SAE Z-26.1. The American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways—Safety Standard, ANSI/SAE Z-26.1-1996 is the latest complete updated version and is referred to hereafter as “the safety standard.” This SAE Recommended Practice is not intended to preclude references to any governmental law, ordinance, or regulation which might apply to the glazing of motor vehicles and motor vehicle equipment operating on land highways.
Standard

Spectral Transmission Test
2012-12-07
HISTORICAL
J1796_201212
The scope of this SAE performance standard is to define the test method by which the direct solar and visible transmittance of safety glazing materials for road vehicles shall be measured. Adherence to this performance standard will facilitate writing, use and referencing of reports by government, industry and other organizations.
Standard

Luminous Reflectance in Safety Glazing Materials for Road Vehicles
2012-12-07
HISTORICAL
J2134_201212
The scope of this SAE Performance Standard is to provide a simple, practical, and broadly applicable test procedure for appraising luminous Illuminant A reflectance of reflecting safety glazing materials for road vehicles. This SAE Performance Standard, which provides a simple test procedure widely used in the optics field, may be used to measure the reflectivity which films applied to safety glazing materials for road vehicles may enhance. This test procedure applies to conditions where feasibility, rather than accuracy of measurement, is of prime importance. Measurements can be made outside laboratories in a quality control environment and in similar applications, when glazings, instead of small test specimens, have to be tested.
Standard

Intrusion Resistance of Safety Glazing Systems for Road Vehicles
2011-06-30
HISTORICAL
J2568_201106
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/ attachment/vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in Safety Standard ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard

Plastic Motor Vehicle Safety Glazing—Tolerances and Fabrication Details
2007-02-07
HISTORICAL
J1691_200702
This SAE Recommended Practice is intended to cover plastic safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are presented principally for the guidance of body engineers and designers. For additional information on plastic safety glazing materials for use in motor vehicles and motor vehicle equipment, please see SAE J674.
Standard

Automotive Safety Glasses
2005-10-12
HISTORICAL
J673_200510
This SAE Recommended Practice is intended to cover current safety glazing practice applicable to safety glasses for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included principally for the guidance of body engineers and designers. For additional information on safety glazing materials for use in motor vehicles and motor vehicle equipment, see SAE J674.
Standard

Safety Glazing Materials—Motor Vehicles and Motor Vehicle Equipment
2005-08-22
HISTORICAL
J674_200508
All safety glazing materials used in motor vehicles and motor vehicle equipment operating on land highways should comply with the requirements of the American National Standard, ANSI/SAE Z-26.1. The American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways—Safety Standard, ANSI/SAE Z-26.1-1996 is the latest complete updated version and is referred to hereafter as “the safety standard.” This SAE Recommended Practice is not intended to preclude references to any governmental law, ordinance, or regulation which might apply to the glazing of motor vehicles and motor vehicle equipment operating on land highways.
Standard

Luminous Reflectance in Safety Glazing Materials for Road Vehicles
2005-07-12
HISTORICAL
J2134_200507
The scope of this SAE Recommended Practice is to provide a simple, practical, and broadly applicable test procedure for appraising luminous Illuminant A reflectance of enhanced reflecting safety glazing materials for road vehicles.
123Next >Last >>
X