Refine Your Search

Topic

Author

Search Results

Standard

2020-01-19
/standards/development/intellectual-property
Standard

Cutting Edge - Double Bevel Cross Sections

2020-01-15
CURRENT
J738_202001
This standard is for cutting edge sections typically used in earth-moving machinery defined in SAE J1116 and ISO 6165: a. Scrapers as defined in ISO 7133. b. Dozers as described in ISO 6747. c. Loaders as described in ISO 7131. d. Graders as described in ISO 7134. Hole spacing is defined ISO 7129. Hole conformation is defined in SAE J740.
Standard

Barometry for Altimeter Calibration

2020-01-15
WIP
AIR1075B
This SAE Aerospace Information Report (AIR) is concerned only with aspects directly relating to available accuracy. While well-designed photoelectric, inductive or capacitive readers and pressure regulators, and other accessories are highly desirable for convenience and production rate, they are considered to be outside the scope of this AIR. This AIR is intended to define three classes of barometers, working, reference and transfer and some aspects of their use so that altimeters and air data transducers calibrated aginst working barometers will be comparable. An accuracy of ±0.003 inch (or ±0.076 mm) Hg should be approachable with working barometers meeting the recommendations in this AIR.
Standard

Maintenance of Pitot-Static Systems of Transport Aircraft

2020-01-15
WIP
AIR975B
In efforts to increase the accuracy and reliability of altimetry, speed measurement and other aspects of air data, a great deal of attention and money have been expended on new and refined pressure transducing and computing systems and on the standards by which they are calibrated. So much progress has been made in this that the limiting factor is, or may soon be, the sensing and transmitting in the aircraft of the pressure to be transduced. Until the appearance of References 1 - 13 and 18 there was little guidance available on the maintenance of pitot and static systems. This report presents what information is available, suggests limits, and lists the principal original papers on the subject. To set forth in a single document the principles and practices for maintenance of pitot and static pressure systems of transport aircraft.
Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2020-01-15
WIP
AIR818E
This Aerospace Information Report, (AIR) is intended to provide the sponsors of Aerospace Standards, (AS), with standard wording, formatting, and minimum environment and design requirements for use in the preparation of their document. The individual shall use only those parts of this AIR which apply to their particular document. The individual sponsor may expand the standard wording, especially under Sections 4, 5, and 6 as required. The paragraphs of this AIR shall be used verbatim wherever possible. Unless otherwise directed by SAE, cross referenced documents shall be called out by specific revision letter, e.g. "shall be in accordance with AS XXXXB." In addition, all non-SAE documents called out shall include the document title when initially identified. However, every effort shall be made to keep cross-referencing to an absolute minimum.
Standard

O-Ring Machined from AMS3617 Material

2020-01-13
CURRENT
AS9772A
This standard establishes the dimensional and visual quality requirements, lot requirements, and packaging and labeling requirements for O-rings machined from AMS3617 polyamide material. It shall be used for procurement purposes.
Standard

Wire, Electrical, Stranded, Uninsulated Copper, Copper Alloy, or Aluminum, or Thermocouple Extension, General Specification For

2020-01-10
WIP
AS29606A
This specification covers concentric lay stranded and rope-lay stranded round electrical conductor fabricated from copper, copper alloy or aluminum. This specification also covers thermocouple extension conductor fabricated from nickel/chromium or nickel/aluminum/manganese. The conductors in this specification are suitable for use in insulated wires used in aerospace and other applications.
Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment

2020-01-10
CURRENT
J2417_202001
This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in ISO 6814 and ISO 17591 and certain forestry equipment defined in ISO 6814 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.
Standard

O-Ring Molded from AMS7267 Material

2020-01-09
CURRENT
AS9386A
This standard establishes the dimensional and visual quality requirements, lot requirements, and packaging and labeling requirements for O-rings molded from AMS7267 rubber. It shall be used for procurement purposes.
Standard

O-Ring Molded from AMS7273 Material

2020-01-09
CURRENT
AS9967A
This standard establishes the dimensional and visual quality requirements, lot requirements, and packaging and labeling requirements for O-rings molded from AMS7273 rubber. It shall be used for procurement purposes.
X