Refine Your Search

Topic

Author

Search Results

Standard

Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf

2019-11-14
WIP
J2727
The “System Emissions Chart” contained herein is intended to serve as a means of estimating the annual refrigerant emission rate (grams per year) from new production A/C systems equipped with specified component technologies. It provides emission values for various component technologies that are currently available, and can be expanded as new technologies are commercialized. This document provides the information to develop an Excel file template “System Emissions Chart” for system emission analysis. The chart includes automotive compressor technologies for conventional mobile air conditioning systems as well as those using semi-hermetic compressors. This standard can be considered a companion document to SAE J2763 Test Procedure for Determining Refrigerant Emissions from Mobile Air Conditioning Systems. SAE J2727 estimates system emissions, taking into account production assembly variation and accounts for components that are 100% helium leak tested prior to vehicle final assembly.
Standard

Valve, Inflation, Aircraft Wheel

2019-11-14
CURRENT
AS6817
This SAE Aerospace Standard (AS) defines the configuration of aircraft wheel inflation valve assemblies, including required tolerances, materials, and appropriate finishes.
Standard

Qualified Hoses for Marine Applications

2019-11-14
WIP
J1942/1
The following list consists of hose data provided as of December 2018, and is for convenience in determining acceptability of nonmetallic flexible hose assemblies intended for usage under 46 CFR 56.60-25. Where the maximum allowable working pressure (MAWP) or type of fitting is not specified, use the manufacturer's recommended MAWP or type of fitting. This list has been compiled by SAE Staff from information provided by the manufacturers whose product listings appear in this document. Manufacturers wishing to list their products in this document shall: a. Successfully test their hose to the requirements of SAE J1942, Table 1. b. Submit a letter of certification to the SAE J1942 test requirements for each specific type of hose tested (see sample table on page 4) along with the test results. All sizes should be included in the same letter which must also include all of the information necessary to make a SAE J1942-1 listing. c.
Standard

Mechanical and Material Requirements for Externally Threaded Fasteners

2019-11-12
WIP
J429
This SAE Standard covers the mechanical and material requirements for inch-series steel bolts, screws, studs, screws for sems , and U-bolts in sizes to 1-1/2 in. inclusive. The term “stud” as referred to herein applies to a cylindrical rod of moderate length threaded on either one or both ends or throughout its entire length. It does not apply to headed, collared, or similar products which are more closely characterized by requirements shown herein for bolts. The mechanical properties included in Table 1 were compiled at an ambient temperature of approximately 20 °C (68 °F). These properties are valid within a temperature range which depends upon the material grade used and thermal and mechanical processing.
Standard

Weather

2019-11-12
CURRENT
AS6286/4A
This document shall be used in conjunction with: - AS6286, Training and Qualification Program for Deicing/Anti-icing of Aircraft on the Ground - AS6286/1, Processes including Methods - AS6286/2, Equipment - AS6286/3, Fluids - AS6286/5, Health, Safety and First Aid - AS6286/6, Aircraft Deicing/Anti-icing Diagrams, No-Spray-Zones
Standard

Health, Safety and First Aid

2019-11-12
CURRENT
AS6286/5A
This document shall be used in conjunction with: AS6286 - Training and Qualification Program for Deicing/Anti-icing of Aircraft on the Ground AS6286/1 - Processes including Methods AS6286/2 - Equipment AS6286/3 - Fluids AS6286/4 - Weather AS6286/6 - Aircraft Deicing/Anti-icing Diagrams, No-Spray-Zones
Best Practice

AVSC Best Practice for In-Vehicle Fallback Test Driver Selection, Training, and Oversight Procedures for Automated Vehicles Under Test

2019-11-08
CURRENT
AVSC00001201911
Best Practice for in-vehicle fallback test driver (safety operator) selection, training, and oversight procedures for automated vehicles under test (AVSC000012019MM) addresses the qualifications and training for on-board human oversight of testing for automated driving system (ADS)-operated vehicles. It provides an outline with criteria commonly agreed to by members of the AVSC, which includes: Driver selection Basic Driver training ADS-operation training Initial driving on public roads Periodic re-evaluation and training The Best Practice applies to humans within the vehicle responsible for the safe oversight of development and testing SAE Level 4 and Level 5 automated driving systems on public roads.
Standard

10/15/14Hydraulic Flange Clamps, 2-Screw Flange Connection to be used with SAE J518-1 (Code 61) Connections where Only Low Pressure is Required

2019-11-06
WIP
J518/3
This SAE standard outlines general and dimensional specifications for Code 61 flange clamps for use in low pressure applications with J518-1 connections. For port dimensions, port design considerations, and flange head dimensions, please refer to SAE J518-1. The rated working pressure of an assembly shall not exceed the least of all the component working pressure rated values. The following general specifications supplement the dimensional data contained in the tables with respect to all unspecified detail. Parts manufactured to this standard are also compatible with ISO 6162-1 port connections and flange heads.
Standard

Static Seal Test Fixture and Procedure

2019-11-05
CURRENT
AS7982
This SAE Aerospace Standard (AS) provides dimensions and procedures for a standardized test fixture used to evaluate the static performance of O-rings and other seal types in glands per AS4716 and AS5857.
Standard

Bolts, Screws and Studs, Nickel Alloy, UNS N07718, Work-Strengthened, Tensile Strength 220 ksi, Procurement Specification

2019-11-04
WIP
AS5270A
This procurement specification covers bolts, screws and studs made from a work-strengthened corrosion and heat resistant, age Hardenable nickel base alloy of the type identified under the Unified Numbering System as UNS N07718. The following properties are covered: 220 ksi minimum ultimate tensile strength at room temperature 180 ksi minimum ultimate tensile strength at 900 °F 114 ksi tension to 11.4 ksi tension fatigue at room temperature
Standard

Automatic Transmission Hydraulic Pump Test Procedure

2019-11-04
WIP
J2311
This SAE Recommended Practice provides a method to determine the performance characteristics of the hydraulic oil pumps used in automatic transmissions and automatic transaxles. This document outlines the specific tests that describe the performance characteristics of these pumps over a range of operating conditions and the means to present the test data. This document is not intended to assess pump durability.
X