Search Results

Standard

Nitrile-Butadiene Rubber Fuel, Fire, and Ozone Resistant 65 – 75

2024-04-11

WIP

AMS3224B

This specification covers nitrile-butadiene elastomer in the form of molded sheet and shapes, color coded yellow per ARP1527.

Standard

Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Stock for Forging and Heading, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (Alloy A286), Consumable Electrode Remelted, 1650 °F (899 °C) Solution Heat Treated

2024-04-10

CURRENT

AMS5734L

This specification covers a corrosion- and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing up to 5.00 inches (127 mm), inclusive, in nominal diameter or least distance between parallel sides (thickness), and stock for forging or heading.

Standard

Butadiene Acrylonitrile (NBR) Rubber, Dry Heat Resistant, 55 - 65

2024-04-10

WIP

AMS3202P

This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.

Standard

Butadiene Acrylonitrile (NBR) Rubber, Dry Heat Resistant, 35 - 45

2024-04-10

WIP

AMS3201N

This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.

Standard

Synthetic Rubber, Low-Temperature Resistant, 45-55

2024-04-01

WIP

AMS3205P

This specification covers a synthetic rubber in the form of sheet, strip, tubing, molded shapes, and extrusions.

Standard

Aluminum Alloy, Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed, Fine Grained

2024-04-01

CURRENT

AMS4276C

This specification covers an aluminum alloy in the form of sheet 0.020 to 0.126 inch (0.51 to 3.20 mm), inclusive, in nominal thickness, with fine grain structure (see 8.5).

Standard

Powder, Plasma Spray 50 (88WC - 12Co) + 35 (70Ni - 16.5Cr - 4Fe - 4Si - 3.8B) + 15 (80Ni - 20Al) Three-Component Mixture

2024-04-01

CURRENT

AMS5792C

This specification covers a blend of tungsten carbide-cobalt aggregate, a nickel alloy, and a nickel aluminum aggregate in the form of powder.

Standard

Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength

2024-04-01

CURRENT

AMS4926R

This specification covers a titanium alloy in the form of bars, wire, flash-welded rings 4.000 inches (101.60 mm) and under in nominal diameter or least distance between parallel sides and 16 square inches (103 cm2) and under in cross-sectional area, and stock of any size for flash-welded rings (see 8.7).

Standard

Rivets, Alloy, Corrosion and Heat Resistant 52Co-20Cr-10Ni-15W Solution Heat Treated Procurement Specification For

2024-04-01

CURRENT

AS7236A

This procurement specification covers aircraft-quality solid rivets made from a corrosion- and heat-resistant cobalt alloy of the type identified under the Unified Numbering System as UNS R30605.

Standard

Rivets, Nickel Alloy, Corrosion and Heat Resistant 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated Procurement Specification For

2024-04-01

CURRENT

AS7237A

This procurement specification covers aircraft-quality solid rivets and tubular end rivets made from a corrosion- and heat-resistant nickel alloy of the type identified under the Unified Numbering System as UNS N06002.

Standard

Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for

2024-04-01

CURRENT

AS7210B

This procurement specification covers split cotter pins with optional ends (see Figure 1), made from a corrosion resistant steel of the type identified under the Unified Numbering System as UNS S30200.

Standard

Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification

2024-04-01

CURRENT

AS7211B

This procurement specification covers split cotter pins with optional ends (see Figure 1), made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S32100.

Standard

Steel Bars, Forgings, and Mechanical Tubing and Forging Stock, Carburizing, Aircraft Quality, 0.50Cr - 1.8Ni - 0.25Mo - (0.17 - 0.23C), (SAE 4320H)

2024-04-01

CURRENT

AMS6299H

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

Standard

Titanium Alloy, Sheet, Strip, and Plate 4Al - 2.5V - 1.5Fe Annealed

2024-04-01

CURRENT

AMS6946E

This specification covers a titanium alloy in the form of sheet, strip, and plate 0.020 inch (0.50 mm) through 2.10 inches (53.3 mm), inclusive, in nominal thickness (see 8.5).

Standard

Spring Pins, Tubular, Carbon Steel, Procurement Specification for

2024-04-01

CURRENT

AS7205A

This specification covers tubular-shaped pins, fabricated from carbon steel, having a full-length longitudinal slot to permit flexure when inserted into a hole.

Standard

Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged

2024-04-01

CURRENT

AMS4344G

This specification covers an aluminum alloy in the form of extruded bars, rods, and profiles 0.250 to 2.000 inches (6.35 to 50.80 mm) in nominal thickness and up to 32 square inches (206 cm2), inclusive, in cross-sectional area (see 8.5).

Standard

Titanium Alloy Bars, Wire, and Rings, 8Al - 1Mo - 1V, Solution Heat Treated and Stabilized

2024-04-01

CURRENT

AMS4972K

This specification covers a titanium alloy in the form of bars, wire, flash-welded rings up through 4.000 inches (101.60 mm), inclusive, in diameter or least distance between parallel sides, and stock for flash-welded rings or heading of any size (see 8.6).

Standard

Titanium Alloy Sheet, Strip, and Plate 6Al - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed

2024-04-01

CURRENT

AMS4919K

This specification covers a titanium alloy in the form of sheet, strip, and plate 0.025 to 3.000 inches (0.64 to 76.20 mm), inclusive, in nominal thickness (see 8.6).

Standard

Steel, Corrosion- and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Remelted 1800 °F (982 °C) Solution Heat Treated and Work-Strengthened 160 ksi (1103 MPa) Tensile Strength Capability

2024-04-01

CURRENT

AMS5853E

This specification covers a corrosion- and heat-resistant steel in the form of work-strengthened bars and wire, 1-1/4 inches (31.8 mm) and under in nominal diameter or least distance between parallel sides.

Standard

Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Flash-Welded Rings 17Cr (430), Annealed

2024-04-01

CURRENT

AMS5627J

This specification covers a corrosion- and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash-welded rings, and stock for forging or flash-welded rings.