Refine Your Search

Topic

Author

Search Results

Standard

Oil, Reference, for "L" Stock Rubber Testing

2020-01-17
CURRENT
AMS3020B
This specification covers a petroleum-based reference oil. This fluid has been typically used as a reference oil to evaluate the ability of elastomeric compounds to conform to specified requirements after immersion at a specified time and temperature as required by the material.
Standard

Cutting Edge - Double Bevel Cross Sections

2020-01-15
CURRENT
J738_202001
This standard is for cutting edge sections typically used in earth-moving machinery defined in SAE J1116 and ISO 6165: a. Scrapers as defined in ISO 7133. b. Dozers as described in ISO 6747. c. Loaders as described in ISO 7131. d. Graders as described in ISO 7134. Hole spacing is defined ISO 7129. Hole conformation is defined in SAE J740.
Standard

Barometry for Altimeter Calibration

2020-01-15
WIP
AIR1075B
This SAE Aerospace Information Report (AIR) is concerned only with aspects directly relating to available accuracy. While well-designed photoelectric, inductive or capacitive readers and pressure regulators, and other accessories are highly desirable for convenience and production rate, they are considered to be outside the scope of this AIR. This AIR is intended to define three classes of barometers, working, reference and transfer and some aspects of their use so that altimeters and air data transducers calibrated aginst working barometers will be comparable. An accuracy of ±0.003 inch (or ±0.076 mm) Hg should be approachable with working barometers meeting the recommendations in this AIR.
Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2020-01-15
WIP
AIR818E
This Aerospace Information Report, (AIR) is intended to provide the sponsors of Aerospace Standards, (AS), with standard wording, formatting, and minimum environment and design requirements for use in the preparation of their document. The individual shall use only those parts of this AIR which apply to their particular document. The individual sponsor may expand the standard wording, especially under Sections 4, 5, and 6 as required. The paragraphs of this AIR shall be used verbatim wherever possible. Unless otherwise directed by SAE, cross referenced documents shall be called out by specific revision letter, e.g. "shall be in accordance with AS XXXXB." In addition, all non-SAE documents called out shall include the document title when initially identified. However, every effort shall be made to keep cross-referencing to an absolute minimum.
Standard

Titanium Alloy Bars, Forgings and Forging Stock, 7.0Al - 4.0Mo, Annealed

2020-01-14
CURRENT
AMS6915C
This specification covers a titanium alloy in the form of bars up through 6.000 inches (152.40 mm) inclusive, in nominal diameter or least distance between parallel sides, forgings of thickness up through 6.000 inches (152.40 mm), inclusive and stock for forging of any size.
Standard

O-Ring Machined from AMS3617 Material

2020-01-13
CURRENT
AS9772A
This standard establishes the dimensional and visual quality requirements, lot requirements, and packaging and labeling requirements for O-rings machined from AMS3617 polyamide material. It shall be used for procurement purposes.
Standard

Registration and Conformity Assessment Process for Passenger Cars and Light Trucks Wheels

2020-01-10
WIP
J3010

The SAE J2530 provides performance, sampling, test procedures, and marking requirements for wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicle. This Recommended Practice (which is separate from SAE J2530) specifies the workflow of the Wheel Conformity Assessment Program. This program allows wheel manufacturers to register their product compliant to SAE J3010. The following items precede display of “SAE J3010” on any particular wheel design:

a. Manufacturer registration

All manufactures with the objective to pursue registration, shall complete the registration as an individual manufacturer via the registrar’s website http://wheeldb.registrar.domain. The registration includes company contact information, wheels produced, and company identification marks.

b.

Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment

2020-01-10
CURRENT
J2417_202001
This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in ISO 6814 and ISO 17591 and certain forestry equipment defined in ISO 6814 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.
Standard

O-Ring Molded from AMS7267 Material

2020-01-09
CURRENT
AS9386A
This standard establishes the dimensional and visual quality requirements, lot requirements, and packaging and labeling requirements for O-rings molded from AMS7267 rubber. It shall be used for procurement purposes.
Standard

O-Ring Molded from AMS7273 Material

2020-01-09
CURRENT
AS9967A
This standard establishes the dimensional and visual quality requirements, lot requirements, and packaging and labeling requirements for O-rings molded from AMS7273 rubber. It shall be used for procurement purposes.
X