Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A
2024-04-10
CURRENT
AS3250D
Search Results
Standard
NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, UNS S66286 SILVER PLATED THREADS ONLY
2024-04-10
CURRENT
AS3625B
Standard
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 45° SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
2024-04-10
CURRENT
AS85049/125A
Standard
Nickel Wire and Ribbon 99Ni
2024-04-01
CURRENT
AMS5555G
This specification covers a nickel in the form of round wire and rectangular ribbon.
Standard
Powder, Plasma Spray 50 (88WC - 12Co) + 35 (70Ni - 16.5Cr - 4Fe - 4Si - 3.8B) + 15 (80Ni - 20Al) Three-Component Mixture
2024-04-01
CURRENT
AMS5792C
This specification covers a blend of tungsten carbide-cobalt aggregate, a nickel alloy, and a nickel aluminum aggregate in the form of powder.
Standard
Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for
2024-04-01
CURRENT
AS7210B
This procurement specification covers split cotter pins with optional ends (see Figure 1), made from a corrosion resistant steel of the type identified under the Unified Numbering System as UNS S30200.
Standard
Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification
2024-04-01
CURRENT
AS7211B
This procurement specification covers split cotter pins with optional ends (see Figure 1), made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S32100.
Standard
Steel Bars, Forgings, and Mechanical Tubing and Forging Stock, Carburizing, Aircraft Quality, 0.50Cr - 1.8Ni - 0.25Mo - (0.17 - 0.23C), (SAE 4320H)
2024-04-01
CURRENT
AMS6299H
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
Standard
Spring Pins, Tubular, Carbon Steel, Procurement Specification for
2024-04-01
CURRENT
AS7205A
This specification covers tubular-shaped pins, fabricated from carbon steel, having a full-length longitudinal slot to permit flexure when inserted into a hole.
Standard
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
2024-04-01
CURRENT
AMS4344G
This specification covers an aluminum alloy in the form of extruded bars, rods, and profiles 0.250 to 2.000 inches (6.35 to 50.80 mm) in nominal thickness and up to 32 square inches (206 cm2), inclusive, in cross-sectional area (see 8.5).
Standard
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Flash-Welded Rings 17Cr (430), Annealed
2024-04-01
CURRENT
AMS5627J
This specification covers a corrosion- and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash-welded rings, and stock for forging or flash-welded rings.
Standard
NUT, PLAIN HEXAGON, SILVER PLATED, UNS S66286 130 KSI MIN
2024-03-27
CURRENT
AS9357C
Standard
Aluminum Alloy, Extrusions and Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6), Solution and Precipitation Heat Treated
2024-03-27
CURRENT
AMS4150P
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing, flash-welded rings fabricated from extruded stock, and stock for flash-welded rings (see 8.6).
Standard
CRIMPING TOOLS, TYPE 1, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 16, AND SMALLER
2024-03-22
CURRENT
AS22520/7A
Standard
ROD END - THREADED, AIRCRAFT
2024-03-22
CURRENT
AS49011C
Standard
Spring Pins, Tubular, Coiled Corrosion Resistant Nickel Base Alloy Procurement Specification For
2024-03-22
CURRENT
AS4983A
This procurement specification covers tubular-shaped, coiled spring pins made of a corrosion resistant nickel base alloy of the type identified under the Unified Numbering System as UNS N07718.
Standard
HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, 45° TO 90°
2024-03-22
CURRENT
AS1487A
Standard
Aluminum Alloy Extrusions, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511), Solution Heat Treated, Stress Relieved, and Overaged
2024-03-22
CURRENT
AMS4157F
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing 5.000 inches (127.00 mm) and under in nominal diameter or least thickness (wall thickness of tubing) (see 8.5).
Standard
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe (Alloy X or HX) Solution Heat Treated
2024-03-22
CURRENT
AMS5536R
This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, and plate.
Standard
JAUS Messaging over the OMG Data Distribution Service (DDS)
2024-03-18
CURRENT
ARP6227
This document defines a standard representation of JAUS AS5684A message data in DDS IDL defined by the Object Management Group (OMG) CORBA 3.2 specification. This document does NOT address how JAUS transport considerations or JAUS service protocols are implemented on OMG DDS platforms.
