Refine Your Search

Date

Date

Airlines Electronic Engineering Committee Aircraft operations Aerospace Maintenance and Aftermarket Connectors and terminals Safety testing and procedures Body regions

Search Results

Viewing 1 to 20 of 44
123Next >Last >>
Sort by published
Standard

STANDARD DATA INTERFACE FOR GALLEY INSERT (GAIN) EQUIPMENT PART 1 CAN COMMUNICATIONS
2021-09-10
CURRENT
ARINC812AP1-2
The purpose of this specification is to define the general Galley Insert (GAIN)standardization philosophy, provide comprehensive equipment interfaces, and disseminate the most current industry guidance. Part 1 covers the Controller Area Network (CAN) data interface attachments, envelopes, and data content to be considered between all galley equipment using a Galley Data Bus as described within this specification. This document is intended as the successor and replacement for ARINC Specification 812. This document contains significant improvements to CAN data interfaces.
Standard

CABIN EQUIPMENT INTERFACES PART 5 CABIN ELECTRICAL EQUIPMENT AND WIRING INSTALLATION GUIDELINES
2020-07-24
CURRENT
ARINC628P5-4
ARINC Specification 628, Cabin Equipment Interfaces (CEI) Part 5 Parts Selection, Wire Design and Installation Guidelines, provides design and mounting guidelines for electrical installations, mainly for supplier of cabin furnishing equipment. Part 5 addresses several aspects of installation and is divided into five sections: Introduction, Parts Selection, Electrical Wire Design Guidelines, Wire Installation Guidelines, and Documentation Guidelines. Guidelines regarding design, safety, and other subjects relevant to acceptance of the end item are addressed. Notes explaining the reason for setting a guideline or suggesting methods for performing the task are provided in commentary. The content of the document is designed to make it usable for reference by industry, particularly manufacturers of seats and equipment.
Standard

CABIN CONNECTORS AND CABLES, PART 4, STANDARD TEST METHODOLOGY
2020-07-13
CURRENT
ARINC800P4-1
ARINC 800 is the first industry standard intended for characterization of aviation-grade high-speed (Gbps) Ethernet links. The test methods are based on realistic representation of cabin networks. The notional cabling architecture is based on IFE seat distribution using multiple intermediate disconnects. Sequential testing is supported by building up number of connectors in the link. Test guidelines for mixed intermediate cable lengths are provided.
Standard

CABIN EQUIPMENT INTERFACES PART 2 PHYSICAL LAYER - IN-SEAT PROTOCOL
2020-06-30
CURRENT
ARINC485P2-5
ARINC Specification 485, Part 2 specifies the ARINC 485-control protocol used by the LRUs described in ARINC Specification 628 Part 2. This document defines a multi-drop bus. The point-to-point configuration is also supported. The point-to-point bus is treated simply as a multi-drop bus with only one drop. There is one master LRU and one or more slave LRUs present on the bus. However; multiple buses may be connected in parallel, where each parallel bus operates independently from each other.
Standard

CABIN EQUIPMENT NETWORK BUS
2020-06-19
CURRENT
ARINC854
This standard defines a new cabin network bus. While ARINC Specification 485: Cabin Equipment Interfaces, Part 2, Physical Layer – In-seat Protocol defined a low-speed serial communications interface between electronic equipment in the passenger seat, it is design-focused on obtaining status from in-seat electronic equipment. ARINC Specification 854 is a messaging protocol but does not preclude using the bus for video streaming or multicast. Cabin Equipment has evolved from the very simple to quite sophisticated systems. The resulting communications needs have surpassed the ability of ARINC 485 to provide the necessary data capacity and response times. The basic requirements for low latency, full duplex, elimination of ARINC 485 Master/Slave polling and lower weight drives the selection of 100BASE-T1 (per IEEE 802.3) as the preferred bus format.
Standard

FIBER OPTIC TRAINING REQUIREMENTS
2019-01-10
CURRENT
ARINC807-4
This document is based upon the SAE ARP5602 document, A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education. ARINC Report 807: Fiber Optic Training Requirements is a subset of the SAE ARP5602 document designed to meet the requirements of the commercial air transport industry. Certification to the SAE ARP5602 document fulfills the requirements of ARINC Report 807. This document defines recommended general practices for training requirements of aerospace fiber optic systems. It is the intention of this document to outline proven training practices and general standards of workmanship for technicians engaged in aerospace fiber optic manufacturing, installation, maintenance, and repair for the air transport industry. It is also recommended that management and purchasing personnel receive fundamental training to familiarize themselves with the requirements of aerospace fiber optics.
Standard

CABIN STANDARD ENCLOSURES
2018-11-20
CURRENT
ARINC836A
The purpose of this specification is to define standard cabin equipment enclosures and provisions for equipment attachment on monuments. This standard is intended to enable simpler installation and maintenance of cabin equipment, resulting in time and cost reduction.
Standard

AIR TRANSPORT AVIONICS EQUIPMENT INTERFACES
2017-07-11
CURRENT
ARINC600-20
ARINC 600 is a mechanical packaging standard that is used with the ARINC 700-series of digital avionics equipment. It provides mechanical, electrical, and environmental interfaces between LRUs and the racks or cabinets in which they are installed. Provides connector shell definition, connector insert layout and mounting dimensions.
Standard

CABIN EQUIPMENT INTERFACES 4GCN CABIN MANAGEMENT AND ENTERTAINMENT SYSTEM, CABIN DISTRIBUTION SYSTEM
2016-07-14
CURRENT
ARINC832-1
ARINC Specification 832 defines standards for the aircraft 4th Generation Cabin Network (4GCN) Cabin Distribution System (CDS) wiring, connectors, power, identification codes, space envelopes, and mounting principles. Design guidelines are included for informational purposes as these guidelines impact the interfaces and installation of cabin equipment aboard the aircraft.
Standard

ELECTRONIC FLIGHT BAG (EFB) STANDARD INTERFACE
2015-12-11
CURRENT
ARINC828-4
ARINC 828-4 defines a common Electronic Flight Bag (EFB) interface that can support EFB installations and the associated software applications. Supplement 4 defines two new connectors that will provide power and Ethernet to the EFB, thus enabling a smaller and lighter footprint for EFB installation provisions.
Standard

CABIN CONNECTORS AND CABLES PART 4 STANDARD TET METHODOLOGY
2015-12-01
CURRENT
ARINC800P4
ARINC 800 is the first industry standard intended for characterization of aviation-grade high-speed (Gbps) Ethernet links. The test methods are based on realistic representation of cabin networks. The notional cabling architecture is based on IFE seat distribution using multiple intermediate disconnects. Sequential testing is supported by building up number of connectors in the link. Test guidelines for mixed intermediate cable lengths are provided.
Standard

DEFINITION OF STANDARD INTERFACES FOR GALLEY INSERT (GAIN) EQUIPMENT PHYSICAL INTERFACES
2015-11-23
CURRENT
ARINC810-5
ARINC 810 defines galley equipment physical attachments, envelopes, connections, and qualification guidelines for interchangeable galley equipment. Supplement 5 defines a size 6 galley insert, intended for microwave oven installation and other equipment suited to this type of installation. Supplement 5 also clarifies reference dimensioning for all GAIN sizes defined by ARINC 810.
Standard

GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY
2015-08-01
CURRENT
ARINC735B-2
This document defines a Traffic Surveillance capability for NextGen and SESAR airspace environments. Supplement 2 adds hybrid surveillance functionality. It satisfies recent updates to FAA Airworthiness Circular AC 20-151B - Airworthiness Approval of Traffic Alert and Collision Avoidance Systems (TCAS II), and Technical Standard Order TSO-119d requiring the annunciation of a hybrid surveillance failure. Supplement 2 also adds strobe program pinning, updates TCAS inputs status, improves aircraft troubleshooting, and supports recent central maintenance computer function block point updates.
Standard

CABIN EQUIPMENT INTERFACES PART 0 CABIN MANAGEMENT AND ENTERTAINMENT SYSTEM - OVERVIEW
2015-07-27
CURRENT
ARINC628P0-3
The purpose of this document is to provide an introduction and overview of the ARINC 628 series of Specifications. ARINC 628 defines equipment and installation standards for cabin equipment, which is generally defined as communication and entertainment equipment designed for passenger use. Part 0 provides the concepts and overview of ARINC 628 and descriptions of each individual part. Appendix B is written in briefing chart format to facilitate the user in preparing quick-reaction overhead projection-type presentations. Supplement 3 represents a summary of recent changes to Parts 1 through 9 of ARINC Specification 628.
Standard

SPECIFICATION CONNECTORS, RACK AND PANEL, RECTANGULA REAR RELEASE CRIMP CONTACTS
2015-06-01
CURRENT
ARINC404B-2
This document defines standardized connectors intended for use on rack-mountable avionics equipment. It is aligned to the latest version of MIL-C-81659. Supplement 2 was updated to support cabin equipment applications. It corrects intermateability control dimensions that are provided for single shell plug connectors.
Standard

STANDARD DATA INTERFACE FOR GALLEY INSERT (GAIN) EQUIPMENT PART 1 CAN COMMUNICATIONS
2014-08-26
CURRENT
ARINC812AP1-1
The purpose of this specification is to define the general Galley Insert (GAIN)standardization philosophy, provide comprehensive equipment interfaces, and disseminate the most current industry guidance. Part 1 covers the Controller Area Network (CAN) data interface attachments, envelopes, and data content to be considered between all galley equipment using a Galley Data Bus as described within this specification. This document is intended as the successor and replacement for ARINC Specification 812. This document contains significant improvements to CAN data interfaces.
123Next >Last >>
X