Search Results

Due to the greater need to reduce exhaust emissions of harmful gases (GHG, NOx, PM, etc.), to promote the decarbonisation process and to overcome the drawbacks of electric vehicles (low range, high cost, impact of electricity production on CO2 emissions…), the hybrid-electric vehicles are still considered as the more feasible path through sustainable mobility. However, one of the main tasks to be accomplished to get maximum benefit from hybrid-electric powertrain is the management of the energy flows between the different power sources, namely internal combustion engine, electric machine(s) and battery pack. In this paper a methodology for the experimental testing of HEVs energy management strategies at the engine test bed is presented. The experimental set-up consists in an eddy-current dyno and a light-duty common-rail Diesel engine.

In the global quest for preventing fossil fuel depletion and reducing air pollution, hybridization plays a fundamental role to achieve cleaner and more fuel-efficient automotive propulsion systems. While hybrid powertrains offer many opportunities, they also present new developmental challenges. Due to the many variants and possible architectures, development issues, such as the definition of powertrain concepts and the optimization of operating strategies, are becoming more and more important. The paper presents model-based fuel economy analyses of different hybrid vehicle configurations, depending on the position of the electric motor generator (EMG). The analyses are intended to support the design of powertrain architecture and the components sizing, depending on the driving scenario, with the aim of reducing fuel consumption and CO2 emissions.

Diesel engines are attractive thanks to good performance in terms of fuel consumption, drivability, power output and efficiency. Nevertheless in the last years, increasing restrictions have been imposed to particulate emissions, concerning both mass (PM) and number (PN). Different technologies have been proposed to meet emissions standards and the wall-flow Diesel Particulate Filter (DPF) is currently the most common after-treatment system used to trap PM from the exhaust gases. This technology exhibits good features such that it can be regenerated to remove any accumulation of PM. However, this process involves oxidation of the filtered PM at a high temperature through after and post fuel injection strategies, which results in an increase of fuel consumption and may lead to physical damages of the filter in the long term. This work deals with the experimental testing of a catalytic silicon carbide (SiC) wall flow DPF, aiming at decreasing the soot oxidation temperature.

1 The wall-flow Diesel Particulate Filter (DPF) is currently the most common after-treatment system used to meet the particulate emissions regulations for automotive engines. Today’s technology shows the best balance between filtration efficiency and back-pressure in the engine exhaust pipe. During the accumulation phase the pressure drop across the filter increases, thus requiring periodic regeneration of the DPF through after and post fuel injection strategies. This paper deals with the development of a control oriented model of a catalytic silicon carbide (SiC) wall flow DPFs with CuFe2O4 loading for automotive Diesel engines. The model is intended to be used for the real-time management of the regeneration process, depending on back-pressure and thermal state.

The wall-flow Diesel Particulate Filter (DPF) is currently the most common after-treatment system used to meet the particulate emission limits imposed by government regulations. Today’s technology shows the best balance between filtration efficiency and back-pressure in the engine exhaust pipe. Conventional filters consist in alternately plugged parallel square channels, so that the exhaust gases flow through the porous inner walls leading to particles trapping. During the accumulation phase the pressure drop across the filter increases, thus requiring periodic regeneration of the DPF through after and post fuel injection strategies. This paper deals with the experimental testing of a catalytic silicon carbide (SiC) wall flow DPFs with CuFe2O4 loading. The filter was built following an optimized procedure based on a preliminary controlled chemical erosion of the SiC porous structure.

In the last few years, several studies have proved the benefits of exploiting information about the road topography ahead of the vehicle to adapt vehicle cruising for fuel consumption reduction. Recent technologies have brought on-board more road information enabling the optimization of the driving profile for fuel economy improvement. In the present paper, a cruise controller able to lowering vehicle fuel consumption taking into account the characteristics of the road the vehicle is traveling through is presented. The velocity profile is obtained by minimizing via discrete dynamic programming the energy spent to move the vehicle. In order to further enhance vehicle fuel efficiency, also the gear shifting schedule is optimized, allowing to avoid useless gear shifts and choose the most suitable gear to match current road load and keeping the engine in its maximum efficiency range. Despite the optimality of the solution provided, dynamic programming entails high computational time.

Road topography has a remarkable impact on vehicle fuel consumption for both passenger and heavy duty vehicles. In addition, erroneous or non-optimized scheduling of both velocity set-point and gear shifting may be detrimental for fuel consumption and performance. Recent technologies have made road data, such as elevation or slope, either available or measurable on board, thus making possible the exploitation of this additional information in innovative controllers. The aim of this paper is the development of a smart, fuel-economy oriented controller adapting cruising speed and engaged gear to current road load (i.e. local slope). Unlike traditional cruise controllers, the velocity set-point is not constant, but it is set by applying a mathematical transformation of the current slope, accounting for the mission time duration as well.

In the last years, the research effort of the automotive industry has been mainly focused on the reduction of CO2 and pollutants emissions. In this scenario, concepts such as the engines downsizing, stop/start systems as well as more costly full hybrid solutions and, more recently, Waste Heat Recovery technologies have been proposed. These latter include Thermo-Electric Generator (TEG), Organic Rankine Cycle (ORC) and Electric Turbo-Compound (ETC) that have been practically implemented on few heavy-duty applications but have not been proved yet as effective and affordable solutions for passenger cars. The paper deals with modeling of ORC power plant for simulation analyses aimed at evaluating the opportunities and challenges of its application for the waste heat recovery in a compact car, powered by a turbocharged SI engine.

International regulations continuously restrict the standards for the exhaust emissions from automotive engines. In order to comply with these requirements, innovative control and diagnosis systems are needed. In this scenario the application of methodologies based on the in-cylinder pressure measurement finds widespread applications. Indeed, almost all engine thermodynamic variables useful for either control or diagnosis can be derived from the in-cylinder pressure. Apart for improving the control accuracy, the availability of the in-cylinder pressure signal might also allow reducing the number of existing sensors on-board, thus lowering the equipment costs and the engine wiring complexity. The paper focuses on the detection of the engine thermal state, which is fundamental to achieve suitable control of engine combustion and after-treatment devices.

This paper deals with modeling and analysis of the integration of ThermoElectric generators (TEG) into a conventional vehicle, specifically aimed at recovering waste heat from exhaust gases. The model is based on existing and commercial thermoelectric materials, specifically Bi2Te3, having ZTs not exceeding 1 and efficiency below 5%, but a trade-off between cost and performance that would be acceptable for automotive applications. TEGs operate on the principle of thermoelectric energy conversion via Seebeck effect, utilizing thermal gradients to generate electric current, with exhaust gases at the hot side and coolant at the cold side. In the simulated configuration the TEG converters are interfaced with the battery/alternator supporting the operation of the vehicle, reducing the energy consumption due to electrical accessories and HVAC.

In the last years the automotive industry has been involved in the development and implementation of CO2 reducing concepts such as the engines downsizing, stop/start systems as well as more costly full hybrid solutions and, more recently, waste heat recovery technologies. These latter include ThermoElectric Generator (TEG), Rankine cycle and Electric Turbo Compound (ETC) that have been practically implemented on few heavy-duty application but have not been proved yet as effective and affordable solutions for the automotive industry. The paper deals with the analysis of opportunities and challenges of the Electric Turbo Compound for automotive light-duty engines. In the ETC concept the turbine-compressor shaft is connected to an electric machine, which can work either as generator or motor. In the former case the power can satisfy the vehicle electrical demand to drive the auxiliaries or stored in the batteries.

The paper describes suited methodologies for developing Recurrent Neural Networks (RNN) aimed at estimating NOx emissions at the exhaust of automotive Diesel engines. The proposed methodologies particularly aim at meeting the conflicting needs of feasible on-board implementation of advanced virtual sensors, such as neural network, and satisfactory prediction accuracy. Suited identification procedures and experimental tests were developed to improve RNN precision and generalization in predicting engine NOx emissions during transient operation. NOx measurements were accomplished by a fast response analyzer on a production automotive Diesel engine at the test bench. Proper post-processing of available experiments was performed to provide the identification procedure with the most exhaustive information content. The comparison between experimental results and predicted NOx values on several engine transients, exhibits high level of accuracy.

Automotive engines and control systems are more and more sophisticated due to increasingly restrictive environmental regulations. Particularly in both diesel and SI lean-burn engines NOx emissions are the key pollutants to deal with and sophisticated Engine Management System (EMS) strategies and after-treatment devices have to be applied. In this context, the in-cylinder oxygen mass fraction plays a key-role due its direct influence on the NOx formation mechanism. Real-time estimation of the intake O₂ charge enhances the NOx prediction during engine transients, suitable for both dynamic adjustments of EMS strategies and management of aftertreatment devices. The paper focuses on the development and experimental validation of a real-time estimator of O₂ concentration in the intake manifold of an automotive common-rail diesel engine, equipped with turbocharger and EGR system.

The paper focuses on the experimental identification and validation of recurrent neural networks (RNN) for virtual sensing of NO emissions in internal combustion engines (ICE). Suited training procedures and experimental tests are proposed to improve RNN precision and generalization in predicting NO formation dynamics. The reference Spark Ignition (SI) engine was tested by means of an integrated system of hardware and software tools for engine test automation and control strategies prototyping. A fast response analyzer was used to measure NO emissions at the exhaust valve. The accuracy of the developed RNN model is assessed by comparing simulated and experimental trajectories for a wide range of operating scenarios. The results evidence that RNN-based virtual NO sensor will offer significant opportunities for implementing on-board feedforward and feedback control strategies aimed at improving the performance of after-treatment devices.

The measurement of the various pollutant species (HC, CO, NO, etc.) has become one of the main issues in internal combustion engine research. This interest concerns not only their quantitative measurement but also the study of the mechanism of their formation. In fact, pollutant species concentration can be used as an indicator for the combustion characteristics. For instance, it enables the determination of a lean or a rich combustion, the percentage of EGR, etc. The purpose of this research is to investigate the behavior of pollutant gas particles in the first part of an engine exhaust system through a detailed study of the unsteady flow in the exhaust pipe. The results are intended to designate the appropriate sensor positions which ensure accurate measurement results. This investigation wants to track an inert component in the exhaust system, namely the NO gas.

An integrated system of phenomenological models is applied in conjunction with identification techniques to simulate SI engine performance and emissions. In the framework of a hierarchical model architecture, the model structure provides the steady state engine data required for the design and validation of synthetic engine models. This approach allows limiting the recourse to the experimental data and speeds up the engine control strategies prototyping. The model structure is composed of a multi-zone thermodynamic engine model linked to a 1-D commercial fluid-dynamic model for intake and exhaust gas flow and to a physical model for NOx exhaust emissions. In order to improve model accuracy and generalization, an identification methodology is applied to estimate the optimal parameters for the turbulent combustion model. Due to the built-in physical content, the proposed methodology requires a relatively limited amount of experimental data for characterizing the under-study engine.

The paper deals with the application of two techniques for the selection of the training data set used for the identification of Neural Network black-box engine models; the research starts from previous studies on Sequential Experimental Design for regression based engine models. The implemented methodologies rely on the Active Learning approach (i.e. active selection of training data) and are oriented to drive the experiments for the Neural Network training. The methods allow to select the most significant examples leading to an improvement of model generalization with respect to a heuristic choice of the training data. The data selection is performed making use of two different formulation, originally proposed by MacKay and Cohn, based on the Shannon's Statistic Entropy and on the Mean Error Variance respectively.

A computer code oriented to S.I. engine control and powertrain simulation is presented. The model, developed in Matlab-Simulink® environment, predicts engine and driveline states, taking into account the dynamics of air and fuel flows into the intake manifold and the transient response of crankshaft, transmission gearing and vehicle. The model, derived from the code O.D.E.C.S. for the optimal design of engine control strategies now in use at Magneti Marelli, is suitable both for simulation analysis and to achieve optimal engine control strategies for minimum consumption with constraints on exhaust emissions and driveability via mathematical programming techniques. The model is structured as an object oriented modular framework and has been tested for simulating powertrain system and control performance with respect to any given transient and control strategy.