Search Results

Deep drawing with hydraulic counter pressure has numerous advantages compared to conventional deep drawing. Hydromechanical deep drawing is a capable process for producing complex and tapered-shaped stamping parts as well as parts with excellent surface quality, i.e., outer body panels. Due to the low costs of dies, compared to the conventional deep drawing dies, hydromechanical deep drawing has to be considered especially for low volume production. This paper deals with press- and die concepts for hydromechanical deep drawing. The die concepts can be equipped with an integrated multi-point cushion system. It is also possible to build a press with a multipoint cushion system integrated into the press. In this case, the die is less expensive but the press is more complex. The counter pressure pot can be product specific as a part of the die or as a part of the press investment.

In cooperation with industrial companies at the Institute for Metal Forming Technology (IFU) of the University of Stuttgart, Germany, a new press concept specially for hydroforming tubes and extrusions was developed. The press has a capacity of 3500 tons closing force and a press table size of 2500 mm × 900 mm. A great reduction in costs can be achieved by integrating spacers between the frame of the press and the ram. This paper introduces this new press.

By inner pressure hydroforming a great variety of parts can be produced. This is especially true when forming tubes in a single action press with high closing forces. In cooperation with industrial companies at the Institute for Metal Forming Technology of the University of Stuttgart, Germany, a new concept for presses specially designed for hydroforming tubes and extrusions was developed. The press has a capacity of a 3500 tons closing force and a press table size of 2500 mm × 900 mm. A great reduction in costs can be achieved by integrating spacers between the frame of the press and the ram. This paper introduces this new press and discusses different press concepts for hydroforming tubes and extrusions.

This paper deals with the radii of draw dies for sheet metal parts, like fenders, hoods, and doors. For relative flat parts, like hoods, it is important to get at least a 2% forming rate in the middle of the part to reach minimum of stiffness, work hardening, and sufficient geometric accuracy. This can be influenced by the punch radii. Therefore, optimal punch radii should be known. First experimental results about optimal punch radii where published by J.L. Duncan and B.S. Shabel in the SAE-Paper No. 780391. At the Institute for Metal Forming Technology of the University of Stuttgart, Germany, a “Modified Duncan Shabel Test” (MDS-Test) has been developed. This test makes it possible to investigate not only the punch radii but also the die radii. This paper shows optimal punch and die radii as a function of sheet metal, sheet thickness, as well as of the die material.

The objective of this paper is to introduce a method for producing effective binder designs for sheet metal forming of automotive body panels. The fundamentals steps of die design are discussed as well as methods for checking the developability of binder surfaces and the application of a binder simulator and FEM process simulation. A front fender and a door panel have been used to illustrate the methodology.