Refine Your Search

Search Results

Standard

Snowmobile Throttle Control Systems

2019-06-06
CURRENT
J92_201906
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles, nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand-control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Maximum Exterior Sound Level for Snowmobiles

2019-04-03
WIP
J192
This SAE Recommended Practice establishes the instrumentation, test site, and test procedure for determining the maximum exterior sound level for snowmobiles. Sound propagation is directly related to the ground cover and provides the largest variation to the measured result. A correction factor is introduced to improve year-round test repeatability of the results on grass surfaces by correcting their spectrum to be similar to snow-covered spectra. Measured sound pressure levels are also highly dependent on the degree of track slip present when performing the vehicle acceleration. Operators should attempt to limit track slip as much as possible while maintaining the requirements described in 5.1.1.
Standard

Brake System Test Procedure - Snowmobiles

2019-03-28
WIP
J45
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Snowmobile Brake Control Systems

2019-02-27
CURRENT
J1282_201902
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand brake control systems. This recommendation is not intended to cover competition vehicles, nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable or hydraulic type brake control system, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Maximum Exterior Sound Level for Snowmobiles

2019-01-23
CURRENT
J192_201901
This SAE Recommended Practice establishes the instrumentation, test site, and test procedure for determining the maximum exterior sound level for snowmobiles. Sound propagation is directly related to the ground cover and provides the largest variation to the measured result. A correction factor is introduced to improve year-round test repeatability of the results on grass surfaces by correcting their spectrum to be similar to snow-covered spectra. Measured sound pressure levels are also highly dependent on the degree of track slip present when performing the vehicle acceleration. Operators should attempt to limit track slip as much as possible while maintaining the requirements described in 5.1.1.
Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

2018-11-14
CURRENT
J89_201811
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Brake System Test Procedure - Snowmobiles

2018-11-14
CURRENT
J45_201811
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Snowmobile Definitions and Nomenclature - General

2017-07-21
CURRENT
J33_201707
This SAE Recommended Practice sets forth accepted definitions and terminology of major components and parts peculiar to snowmobiles. Illustrations have been selected to identify functional characteristics and to identify common mechanisms. They are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. These criteria were prepared to facilitate clear understanding and promote uniformity in snowmobile nomenclature.
Standard

Snowmobile Probe Test for Contact with Power Driven Parts

2016-02-18
CURRENT
J2826_201602
This SAE Recommended Practice establishes the test equipment, procedure, and acceptance criteria necessary to determine the location of power driven components that could, upon inadvertent contact by an operator, passenger, or bystander, inflict injury.
Standard

Snowmobile Passenger Handgrips

2016-01-20
WIP
J1062
This SAE Recommended Practice is intended to give information to engineers and designers in order that access to a passenger handgrip, when used, is easily obtained and that such handgrips offer maximum safety for a person at least as large as a 95th percentile adult male during snowmobile operation.
Standard

Maximum Exterior Sound Level for Snowmobiles

2013-01-10
HISTORICAL
J192_201301
This SAE Recommended Practice establishes the instrumentation, test site, and test procedure for determining the maximum exterior sound level for snowmobiles. Sound propagation is directly related to the ground cover and provides the largest variation to the measured result. A correction factor is introduced to improve year round test repeatability of the results on grass surfaces by correcting their spectrum to be similar to snow covered spectra. Measured sound pressure levels are also highly dependent on the degree of track slip present when performing the vehicle acceleration. Operators should attempt to limit track slip as much as possible while maintaining the requirements described in 5.1.1.
Standard

Maximum Exterior Sound Level for Snowmobiles

2011-03-06
HISTORICAL
J192_201103
This SAE Recommended Practice establishes the instrumentation, test site, and test procedure for determining the maximum exterior sound level for snowmobiles. Sound propagation is directly related to the ground cover and provides the largest variation to the measured result. A correction factor is introduced to improve year round test repeatability of the results on grass surfaces by correcting their spectra to be similar to snow covered ground spectrums. Measured sound pressure levels are also highly dependent on the degree of track slip present when performing the vehicle acceleration. Operators should attempt to limit track slip as much as possible while maintaining the requirements described in 5.1.1.
Standard

Snowmobile Throttle Control Systems

2010-08-26
HISTORICAL
J92_201008
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Snowmobile Definitions and Nomenclature—General

2009-03-27
HISTORICAL
J33_200903
This SAE Recommended Practice sets forth accepted definitions and terminology of major components and parts peculiar to snowmobiles. Illustrations have been selected to identify functional characteristics and to identify common mechanisms. They are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. These criteria were prepared to facilitate clear understanding and promote uniformity in snowmobile nomenclature.
Standard

Snowmobile Passenger Handgrips

2008-04-21
CURRENT
J1062_200804
This SAE Recommended Practice is intended to give information to engineers and designers in order that access to a passenger handgrip, when used, is easily obtained and that such handgrips offer maximum safety for a person at least as large as a 95th percentile adult male during snowmobile operation.
Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

2007-04-13
HISTORICAL
J89_200704
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

1995-06-01
HISTORICAL
J89_199506
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Vehicle Identification Numbers--Snowmobiles

1995-05-01
HISTORICAL
J64_199505
This SAE Standard is intended to provide uniform requirements for the visibility and durability of vehicle identification numbers on snowmobiles.
Standard

Speed Control Assurance for Snowmobiles

1995-05-01
HISTORICAL
J1222_199505
This SAE Recommended Practice is intended to provide minimum requirement and performance criteria for devices intended to prevent snowmobile runaway due to malfunction of the speed control system.
X