Refine Your Search

Search Results

Standard

Automotive Air Brake Line Couplers (Gladhands)

2019-11-20
CURRENT
J318_201911
This SAE Recommended Practice is intended to provide design, interchangeable dimensions, testing procedures, performance requirements, and minimum identification for gladhand-type air line couplers used to connect the brake systems of trucks, truck-tractors, trailers, and dollies when these vehicles are joined to operate as a combination unit.
Standard

Automotive and Off-Highway Air Brake Reservoir Performance and Identification Requirements - Truck and Bus

2018-11-20
CURRENT
J10_201811
This SAE Standard applies to all new production air brake and air accessory reservoirs used in automotive vehicles and off-road machines. This document defines an “air reservoir” as a reservoir having single or multiple compartments that is used for storage of compressed air. This document does not apply to accumulators or reservoirs for storage of gases other than compressed air.
Standard

Air Brake Valve - Performance Requirements

2016-07-20
CURRENT
J1410_201607
This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity
Standard

Air Brake Valves Test Procedure

2016-07-20
CURRENT
J1409_201607
This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic valves with respect to: a Input-Output Performance b Leakage Characteristics c Low Temperature Evaluation d Elevated Temperature Evaluation e Corrosion Resistance Evaluation f Endurance Testing g Structural Integrity h Vibration Testing
Standard

Labeling Air Brake Valves with Their Performance (Input-Output) Characteristics

2016-06-14
CURRENT
J1860_201606
This SAE Recommended Practice applies to those air brake system valves used to control the vehicle service brakes and test procedures defined by SAE J1859 to measure performance characteristics. This Recommended Practice adheres to standard industry practice of using English units for specifying valve characteristics.
Standard

Automotive and Off-Highway Air Brake Reservoir Performance and Identification Requirements - Truck and Bus

2013-12-04
HISTORICAL
J10_201312
This SAE Standard applies to all new production air brake and air accessory reservoirs used in automotive vehicles and off-road machines. This document defines an “air reservoir” as a reservoir having single or multiple compartments that is used for storage of compressed air. This document does not apply to accumulators or reservoirs for storage of gases other than compressed air.
Standard

Automotive Air Brake Line Couplers (Gladhands)

2013-05-28
HISTORICAL
J318_201305
This SAE Recommended Practice is intended to provide design, interchangeable dimensions, testing procedures, performance requirements, and minimum identification for gladhand-type air line couplers used to connect the brake systems of trucks, truck-tractors, trailers, and dollies when these vehicles are joined to operate as a combination unit.
Standard

Automotive Air Brake Line Couplers (Gladhands)

2012-06-11
HISTORICAL
J318_201206
This SAE Recommended Practice is intended to provide design, interchangeability dimensions, testing procedures, performance requirements, and minimum identification for gladhand-type air line couplers used to connect the brake systems of trucks, truck-tractors, trailers, and dollies when these vehicles are joined to operate as a combination unit. Purpose The purpose is to provide coupler halves for brake lines on one vehicle that will be identified and compatible with the coupler halves on the brake lines of another vehicle.
Standard

Air Dryer Installation Procedure

2012-06-04
HISTORICAL
J2383_201206
This SAE Recommended Practice establishes uniform Installation Parameters for desiccant Air Dryers for vehicles with compressed air systems.
Standard

Labeling Air Brake Valves with Their Performance (Input-Output) characteristics

2011-05-16
HISTORICAL
J1860_201105
This SAE Recommended Practice applies to those air brake system valves used to control the vehicle service brakes and test procedures defined by SAE J1859 to measure performance characteristics. This Recommended Practice adheres to standard industry practice of using English units for specifying valve characteristics.
Standard

Air Brake Valve - Performance Requirements

2011-02-18
HISTORICAL
J1410_201102
This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity
Standard

Air Brake Valves Test Procedure

2011-02-04
HISTORICAL
J1409_201102
This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic valves with respect to: a Input-Output Performance b Leakage Characteristics c Low Temperature Evaluation d Elevated Temperature Evaluation e Corrosion Resistance Evaluation f Endurance Testing g Structural Integrity h Vibration Testing
Standard

Air Quality for Air Braked Vehicles

2008-12-02
CURRENT
J2457_200812
This SAE Recommended Practice establishes air quality standards for the pressurized air in the brake system of vehicles with air brakes.
Standard

Automotive and Off-Highway Air Brake Reservoir Performance and Identification Requirements - Truck and Bus

2007-11-12
HISTORICAL
J10_200711
This SAE Standard applies to all new production air brake reservoirs used in automotive vehicles and off-road machines. This document defines an "air brake reservoir" as a reservoir having single or multiple compartments that is used for storage of compressed air. This document does not apply to accumulators or reservoirs for storage of gases other than compressed air. The reservoirs tested per these requirements shall be selected from production stock and shall be equipped with all permanently attached items such as mounting brackets and fitting bosses.
Standard

Air Brake Valve--Performance Requirements

2004-05-10
HISTORICAL
J1410_200405
This SAE Recommended Practice establishes minimum performance requirements for pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: The document establishes uniform performance requirements for pneumatic valves designed to operate at 862 kPa (125 psi) nominal pressure in commercial air brake vehicles. a. Input - output performance b. Leakage test c. Low temperature performance d. Elevated temperature performance e. Corrosion resistance performance f. Endurance testing g. Structural integrity
Standard

Automotive Air Brake Line Couplers (Gladhands)

2003-04-24
HISTORICAL
J318_200304
This SAE Recommended Practice is intended to provide design, interchangeability dimensions, testing procedures, performance requirements, and minimum identification for gladhand-type air line couplers used to connect the brake systems of trucks, truck-tractors, trailers, and dollies when these vehicles are joined to operate as a combination unit. Purpose The purpose is to provide coupler halves for brake lines on one vehicle that will be identified and compatible with the coupler halves on the brake lines of another vehicle.
X