Crash reconstruction is a scientific process that utilizes principles of physics and empirical data to analyze the physical, electronic, video, audio, and testimonial evidence from a crash to determine how and why the crash occurred. This course will introduce this reconstruction process as it gets applied to various crash types - in-line and intersection collisions, pedestrian collisions, motorcycle crashes, rollover crashes, and heavy truck crashes. Methods of evidence documentation will be covered. Analysis methods will also be presented for electronic data from event data recorders and for video.
Finite Element Analysis (FEA) is a powerful and well recognized tool used in the analysis of heat transfer problems. However, FEA can only analyze solid bodies and, by necessity thermal analysis with FEA is limited to conductive heat transfer. The other two types of heat transfer: convection and radiation must by approximated by boundary conditions. Modeling all three mechanisms of heat transfer without arbitrary assumption requires a combined use of FEA and Computational Fluid Dynamics (CFD).
Side impact crashes account for approximately twenty-six percent of all motor vehicle fatal crashes, second only to frontal crashes, according to a report by the National Highway Transportation and Safety Administration (NHTSA). While car companies and suppliers continue to develop new technologies that make vehicles safer, NHTSA rolled out updated safety regulations (FMVSS 214) based on new research studies, making vehicle safety design more and more complex. This seminar is designed to familiarize participants with the engineering principles behind vehicle and restraint designs for occupant safety.
Automation is expanding in every possible direction and it was only time before it reached the Automobile sector. There has been tremendous traction towards autonomous cars since last 2-3 yrs as a probable solution to reduce accidents and promote safe and comfortable commute. Many companies have expressed their interest in developing some part(s) of it and when would all of this culminate resulting in a fully autonomous car. But as every coin has two aspects so same does automation. This paper covers the future of autonomous cars from Indian perspective, covering possible challenges, complex use cases, advantages, technology enablers, economy outlook etc. India has the dubious honor of ranking first in road deaths in the world at present & accounts for 10 percent of global road accidents with more than 1.46 lakh fatalities annually.
To reduce the incidence of whiplash-associated disorders caused by rear impacts, head restraints should be closer to the head which decreases the amount of relative motion and it is believed to reduce the risk of soft tissue neck injury. Drivers are raising complaints that the head restraint causes discomfort by interfering with their preferred head position, forcing them to select a more reclined seat back angle . This paper is about the importance of head restraint system and how it can be improved by adjusting the angle between the head restraint and passenger`s head. It is essential to carry out research on head restraint that can be adjusted in forward and backward direction letting the cost of seats remain in budget.
Research and/or Engineering Questing/Objectives: Safety of the occupant in passenger cars is one of the regulatory requirements in many developed countries. This includes upper interior head impact load case of the unbelted occupant during crash (FMVSS 201U) as one of them. During a crash event the occupant head can collide with the interior parts of the vehicle, such as a headliner, pillar trim and other subsequent components in the loading direction. Injury on the head is quantified in terms of the Head Injury Criterion of a crash test dummy (HIC(d)) value which should be less than 1000 per standard. Several ways can be adopted to reduce the HIC(d) value. These include a change in the design of ribs in the safety plastic components, headliner profile change, use of countermeasure foam between headliner and the exterior sheet metal parts, or a combination of any of these to absorb the energy of impact.
Head injuries are the main source of road fatalities in when a pedestrian is involved in an accident with the vehicle. The frontal part of vehicle such as engine hood, lower-windshield area and A-pillars are the possible location of head impact in such accidents. The head impact with hard points located in these areas result in the fatal head injuries. The effect of impact can be reduced by using the deployable pedestrian protection systems (DPPS) such as hood-lifters and windshield airbag in the vehicle. The study shows how these systems are effective in reducing the fatalities in pedestrian accidents and how to evaluate the performance of these deployable systems.
When i decided to buy a second hand car from a dealer to learn driving, i was sceptical of the mileage usage for which a particular price was charged. Though the well know dealer told me a about the car, its previous usage, the fact that there were no accidents, and so on, there was no reliable way to verify what the dealer was offering. In order to solve such issues, we are looking at a disruptive technique which will cause a complete paradigm shift - by using blockchain technique. This paper talks about the basics of the blockchain technology and its relevance in automotive industry. We also look at some real life scenarios, where this technology helps to build reliability as one of the implicit requirements. We will start looking at how the block chain will help to reliably select the right components in the assembly line. Also we look at different aspects of software architecture like security and how blockchain can provide solutions in this area.
This paper discusses the need for Emergency Vehicle Approaching Alert System (EVAAS) and building of EVAAS components for OTT (over- the-top content), and Media providers. According to a study by the Indian Journal of Surgery in 2006, 80 per cent of road accident victims in India do not receive any emergency medical care (Ambulance) within this ‘golden hour - the first hour after a traumatic injury, when emergency treatment is most likely to be successful.’ Due to increasing population and constructions of Roads and Buildings, Emergency Vehicles are not able to reach the desired location. Hence, there is a need of an Emergency Vehicle Approaching Alert System (EVAAS) in INDIA.
Objective It is very important to simulate the battery pack being built to understand its behavior when used in applications especially Electric vehicles (EV). All Li-Ion cells are not the same. They need to be characterized before building any battery pack. Hence modeling the battery pack to simulated its performance in the actual conditions becomes important. Methodology To understand the behavior of cells in the on-field environment, they are tested at various conditions like different rates of charging/discharging, various depth of discharge (DOD), ambient temperature, etc. HPPC test is also performed on cells to derive its RC model equivalent model. GT Suite simulation software is used to model the Li-Ion cell using the testing data. Depending on the pack configuration, the modeled cell is connected in the required series and parallel configuration, to study the battery pack with respect to aging, performance and cooling requirements.
Research Objective The objective of the paper is to research what are the changes in experiences being brought about due to the advent of Electric Vehicles (EVs). EVs are silent, have less complex propulsion system, and have free space under the hood, amongst other things. Each change brings about both good and bad experiences across the spectrum of users. Some of the bad experiences can be safety incidents leading to death as well. Researching the areas that are harmful to end users, including pedestrians, will be our focus area. Methodology Our methodology will look at the changes at the vehicle architecture level which are inherent to the EV design. Research how are the experiences so far due to these changes. Are these just inconveniences or safety hazards? EVs have excellent NVH characteristics. A farmer may love a silent tractor, but a racing enthusiast may not like a relatively silent sports car.
Downsizing is one of the crucial activities being performed by every automotive engineering organization. The main aim is to reduce – Weight, CO2 emissions and achieve cost benefit. All this is done without any compromise on performance requirement or rather with optimization of system performance. This paper evaluate one such optimization, where-in radiator assembly with two electric fan is targeted for downsizing for small commercial vehicle application. The present two fan radiator is redesigned with thinner core and use of single fan motor assembly. The performance of the heat exchanger is tested for similar conditions back to back on vehicle and optimized to get the balanced benefit in terms of weight, cooling performance and importantly cost. This all is done without any modification in vehicle interface components except electrical connector for fan. The side members and brackets design is also simplified to achieve maximum weight reduction.
Squeak and Rattle (S&R) are the dominant undesired noises which adjudge the perceived quality of a vehicle. It's a foremost problem which needs to be identified and eliminated at a design stage to develop a robust vehicle, which also aids in pacifying the physical testing and warranty claim costs. A Finite Element model of the complex plastic dashboard has been analyzed to identify risks and the root cause of S&R problem under dynamic and static loading conditions, using E-line methodology. These complex transient problems are highly influenced by various parameters like gap variability, temperature, the coefficient of thermal expansion, thickness, and material properties. This paper elaborates the detailed investigation conducted using stochastic simulations to evaluate the individual and combined impact of each parameter on S&R performance
Nowadays the sonar system is used to avoid accidents, which is not effective in case of high-speed at blind turn situation or through side crossing in high ways. That's because vehicle position is not along the line and speed is very high so sonar will not detect danger within avoidable time limits. it seems we need to develop some fast enough system to avoid these type of accidents.