By building on mature internal combustion engine (ICE) hardware combined with dedicated hydrogen (H2) technology, the H2-ICE has excellent potential to accelerate CO2 reduction. H2-ICE concepts can therefore contribute to realizing the climate targets in an acceptable timeframe. In the landscape of H2-ICE combustion concepts, High Pressure Direct Injection (HPDI™) is an attractive option considering its high thermal efficiency, wide load range and its applicability to on-road as well as off-road heavy-duty equipment. Still, H2-HPDI is characterized by diffusion combustion, giving rise to significant NOx emissions. In this paper, the potential of H2-HPDI toward compliance with future emissions legislation is explored on a 1.8L single-cylinder research engine. With tests on multiple load-speed points, Exhaust Gas Recirculation (EGR) was shown to be an effective measure for reducing engine-out NOx, although at the cost of a few efficiency points.
The global transportation industry is mandated to deliver significant reductions in Greenhouse Gas (GHG) emissions within the upcoming decades. The road freight sector in particular faces formidable challenges in terms of emission reduction, while maintaining/improving the performance of the current vehicles. In Europe this transition is being driven in part by specific CO2 legislation for heavy-duty vehicles (HDVs) and penalties for Original Equipment Manufacturers who miss these targets, while in the US these ambitions have been embedded within the EPA regulations. Europe currently has targets for CO2 reduction of 15% by 2025 and 30% by 2030 for new HDVs, likely increasing to 45% by 2030 and 90% by 2040. These targets have been set relative to the fleet average for the industry by truck category and are evaluated using the Vehicle Energy Consumption Calculation Tool (VECTO) to determine CO2 emissions for each unique vehicle configuration.
The reduction of anthropogenic greenhouse gas emissions and ever stricter regulations on pollutant emissions in the transport sector require research and development of new, climate-friendly propulsion concepts. The use of renewable hydrogen as a fuel for internal combustion engines promises to provide a good solution especially for commercial vehicles. For optimum efficiency of the combustion process as efficient, hydrogen-specific engine components are required, which need to be tested on the test bench and analysed in simulation studies. This paper deals with the simulation-based investigation and optimisation of fuel injection in a 6-cylinder PFI commercial vehicle engine, which has been modified for hydrogen operation starting from a natural gas engine concept.
The objective of this study is to investigate the potential of a sustainable fuel composed of ethanol and lignin for marine engines. Lignin is the second most abundant biomass after cellulose, produced i.e. from the pulp-and-paper industries. Lignin has a higher heating value (HHV) of 23.2 – 25.6 MJ/kg but is difficult to exploit efficiently because it is a stable solid material and often ends up as waste. combining lignin and alcohol to a liquid fuel has a huge interest, and is mainly for marine engines as they are designed to tolerate a wide range of fuels. In this study, lignin-fuel with 44 wt% lignin and 50 wt% of ethanol was experimentally evaluated by using an extensively modified small-bore compression ignition (CI) engine. The technical challenges and approach to applying this kind of lignin-fuel to engines are presented.
Climate change and the decarbonization process are challenges for our times. In this context, the transportation sector is undergoing significant changes and new scenarios in the future mobility are open. For light duty vehicles, electrification represents the most immediate and spreading solution; however, to promote the e-mobility expansion, technological improvements mainly related to the charging infrastructures are needed. This work aims at investigating the possibility to use a spark ignition engine fueled with bio-ethanol for off-grid electric vehicle charging station. The engine is a 8.7 liter turbocharged spark ignition engine, single point injection and develops a maximum rated power of about 230 kW at 1500 rpm. A 1-D numerical model was developed to evaluate the main performance in terms of brake power, efficiency, specific fuel consumption and NOx emissions at different spark advances and air-fuel ratio.
The passive pre-chamber is valued for its jet ignition and is widely used in the field of gasoline direct injection (GDI) for small passenger cars, which can improve the performance of lean combustion. However, the scavenging and ignition combustion stability of the engine at low speed is a shortcoming that has not been overcome. Simply changing the structural design to increase the fluidity of MC and PC may lead to a reduction in jet ignition performance, which in turn will affect engine dynamics. This investigation is based on a non-uniformly nozzles distributed passive pre-chamber, which is adjusted according to the working fluid exchange between PC and MC. The advantages and disadvantages of the ignition mode of PC and SI in the target engine speed range are compared through optical experiments on a small single cylinder GDI engine. The results show that with the increase of λ from 1.0 to 1.6, the promotion effect of PCJI on load performance gradually decreases.
Ammonia (NH3), a zero-carbon fuel, has great potential for internal combustion engine development. However, its high ignition energy, low laminar burning velocity, a narrow range of flammability limits, and high latent heat of vaporization are not conducive for engine application. This paper numerically investigates the feasibility of utilizing ammonia in a heavy-duty diesel engine, specifically through the method of low-pressure direct injection (LP-DI) of hydrogen to ignite ammonia combustion. The study compares the engine's combustion and emission performance by optimizing four critical parameters: excess air ratio, hydrogen blending ratio, ignition timing, and hydrogen injection timing. The results reveal that excessively high hydrogen blending ratios lead to an advanced combustion phase, resulting in a reduction in indicated thermal efficiency.
A DMS500 engine exhaust particle size spectrometer was employed to characterize the effects of injection strategies on particulates emissions from a turbocharged gasoline direct injection (GDI) engine. The effects of operating parameters (injection pressure, secondary injection ratio and secondary injection end time) on particle diameter distribution and particle number density of emission was investigated. The experimental result indicates that the split injection can suppress the knocking tendency at higher engine loads. The combustion are improve, and the fuel consumption are significantly reduce, avoiding the increase in fuel pump energy consumption caused by the 50 MPa fuel injection system, but the delayed injection increases particulate matter emissions.
Net-Zero emission ambitions coupled with availability of oxygenated fuels like ethanol encouraged the Government towards commercial implementation of fuels like E20. In this background, a study was taken up to assess the impact of alcohol blended fuels on performance and emission characteristics of a BS-VI complaint motorbike. A single cylinder, 113-cc spark ignition, ECU based electronic fuel injection motorbike was used for conducting tests. Pure gasoline (E0), 10% ethanol-gasoline (E10), 20% ethanol-gasoline (E20) and 15% methanol-gasoline (M15) blends meeting respective IS standards were used as test fuels. The oxygen content of E10, E20 and M15 fuels were 3.7%, 7.4% and 8.35% by weight respectively. Experiments were conducted following worldwide motorcycle test cycle (WMTC) as per AIS 137 standard and also wide-open-throttle (WOT) test cycle, using chassis dynamometer.
World is moving towards cleaner, greener and energy efficient fuels. The increase in fuel consumption in various industries, especially in road transport sector has created interest for the blending of biofuels in conventional fuel and renewable fuels. Among biofuels ethanol is one of them and preferable choice for blending in gasoline which is a fuel for spark ignition engines and flex fuel vehicles. As such ethanol/methanol cannot be used in compression-ignition diesel engines without engine modifications due to inherent low cetane number and lubricity of alcohols. Therefore, fuel consisting of certain concentrations of alcohols such as methanol / ethanol in diesel blends is being promoted. The lower alcohols (methanol/ethanol) are not miscible in diesel due to their polarity differences. An additive package is essential for the solubility and stability of alcohol (methanol/ethanol) in diesel phase or diesel blends.
Modern problem-solving techniques have enabled the lives of engineers to find better solutions even for the most complex problems in the most innovative way. One such technology widely being used in the modern automotive industry is TRIZ, a Russian acronym for the "Theory of Inventive Problem Solving, The main objective of this study is to find an optimum solution to enhance the life of a 2.2-liter automotive diesel engine which has faced challenges of extinction due to the system technology upgrades that happened on Fuel Injection System. It has become a mandate to find an innovative solution that helps to improve performance and efficiency and to reduce cost, weight, size, complexity and manufacturability. With the help of detailed Functional analysis, Cause and Effect Chain analysis, absolute analysis was done in selecting the optimum FIE System for the engine application.