Refine Your Search

Topic

Author

Affiliation

Search Results

Technical Paper

NEXT GENERATION POWER DISTRIBUTION UNIT IN WIRING HARNESS

2019-11-21
2019-28-2571
Keywords – Miniaturization, Low Profile (LP) Relays, Low Profile (LP) Fuses, Fuse box, Wiring Harness Research and/or Engineering Questions/Objective With the exponential advancement in technological features of automobile’s EE architecture, designing of power distribution unit becomes complex and challenging. Due to the increase in the number of features, the overall weight of power distribution unit increases and thereby affecting the overall system cost and fuel economy. The scope of this document is to scale down the weight and space of the power distribution unit without compromising with the current performance. Methodology Miniaturization involves replacing the mini fuses and J-case fuses with LP mini and LP J-case fuses respectively. The transition doesn’t involve any tooling modification and hence saves the tooling cost.
Technical Paper

Thermal Challenges in Automotive Exhaust System through Heat Shield Insulation

2019-11-21
2019-28-2539
While advanced automotive system assemblies contribute greater value to automotive safety, reliability, emission/noise performance and comfort, they are also generating higher temperatures that can reduce the functionality and reliability of thesystem over time. Thermal management and insulation are extremely important and highly demanding in BSVI, RDE and Non-IC engine operating vehicles. Passenger vehicle and Commercial vehicle exhaust systems are facing multiple challenges such as packaging constraints, weight reduction andthermalmanagement requirements.Frugal engineering is mandatory to develop heat shield in the exhaust system with minimum heat loss. The focus of the paper is to design, develop and validate heat shield products with different variables such as design gap, insulation material, sheet metal thickness and manufacturing processes. 1D and 3D computational simulations are performed with different gaps from 3 mm to 14 mm are considered.
Technical Paper

Development of low cost life saving system for Automotive vehicles during Road Accidents.

2019-11-21
2019-28-2460
According to research study 45% of death cause due to not getting help on time to the injured person. Research has proven that if injured person is not found any option of help then they also loose the power to fight such critical situation due to psychological effect. When vehicle met accident, people are not getting on time support, this delay is the major cause of death in developing nations. Presently there is no any robust system available in market for passenger & commercial vehicles which helps to provide on time help to the injured persons & saves human life. In current situation low cost life saving device is need of our society. This paper deals with the design & development of the low cost-life saving device. This paper also comprises the scenario when any vehicle meet an accidents within certain speed limit then how the intelligent life saving device will work & save the life's.
Technical Paper

Sensor Perception and Motion Planning for an Autonomous Material Handling Vehicle.

2019-10-28
2019-01-2611
The ground mobile robotics study is structured on the two pivotal members namely Sensor perception and Motion planning. Sensor perception or Exteroception comprises the ability of measurement of the layout of environment relative to vehicle’s frame of reference which is a necessity for the implementation of safe navigation towards the goal destination in an unstructured environment. Environment scanning has played a significant role in mobile robots application to investigate the unexplored environment in the sector of defence while transporting and handling material in warehouse and hospitals. Motion Planning is a conjunction of analysing the sensor’s information about the local frame and global map while being able to plan the route from starting point to the target destination. In this paper, a 3600 2-D LiDAR is used to capture the spatial information of the surrounding, the scanning results are presented in a local and global map.
Technical Paper

Analytical Model for Calibration Results Performances Enhancement, Resulting in Automated Prescription for Equipments

2019-09-16
2019-01-1878
The current aeronautical manufacturing sector is characterized by the high level of competence and the required requirement in its production processes, based on the objectives of profitability and safety (airworthiness). In recent years, there is a real revolution in the sector, where the most advanced tools for the organization and optimization of production are given priority, supported by the latest massively used techniques of automatic data collection. , their organized storage and their analytical classification. Metrology plays a key role in ensuring the quality and reliability of the information generated in these productive cycles. The provision of an analytical model of flexible measurement systems, capable and easily adaptable to the dynamics of the company, is presented as one of the pillars in which this new conception of production is based.
Technical Paper

Low Cost, Fireproof, and Light Aircraft Interior

2019-09-16
2019-01-1857
Low cost, fireproof, and light aircraft interior Fire is a dramatic issue in aircraft nowadays, especially with composite air crafts. An additional issue is the dangerous use of flammable Li-Ion batteries in a lot of appliances. we propose in order to avoid dramas to produce aircraft interiors, fire doors, cargo bay walls, as well than cargo container able to contain a fire inside them, with our ceramic composite called TOUGHCERAM ®. We have developed a low-cost, ceramic, damage tolerant, this ceramic is flexible between minus 100°C and plus 350°C. TOUGHCERAM ® poly-crystalize between 60°C and 110°C and can be reinforced with fibbers like carbon or basalt one. TOUGHCERAM ® survive 90 minutes to a propane 1900°C torches. TOUGHCERAM ® does not burn, nor smoke. In this paper we will explain how it is possible to develop a fully mineral ceramic offering such unique mechanical and fire properties.
Technical Paper

A Study on the Optimum Reduction of Required Brake Fluid Level for Improvement of The High Speed Continuous Brake Distance

2019-09-15
2019-01-2121
The high speed continuous braking distance assessment is the worst condition for thermal fades. This study was conducted to investigate the relationship between fade characteristic and friction materials & brake fluid amount for improving braking distance. So, we used the dynamometer to measure the friction coefficient, braking distance and required brake fluid amount. First of all, we studied the influence of friction coefficient on the same friction material shape (chamfer shape, area of the friction material, number of slots). Secondly, we knew the effects of braking distance by the shape of the friction material. Through these two studies, the shape of the friction material favorable to the fade characteristics was obtained. Finally, we measured the amount of required brake fluid in caliper after 10 consecutive braking cycles through Dynamometer. And then, we measured the amount of compression deformation and uneven wear of the friction material.
Technical Paper

Development of a Dedicated CNG Three-Way Catalyst Model in 1-D Simulation Platforms

2019-09-09
2019-24-0074
A growing interest in heavy-duty engines powered with CNG dictated by stringent regulations in terms of emissions, has made it essential to study a specific Three-Way Catalyst (TWC). Oxygen storage phenomena characterize catalytic converter efficiency under real world driving operating conditions and, consequently, during strong dynamics in Air-to-Fuel (A/F) ratio. A numerical “quasi-steady” model has been set-up to simulate the chemical process inside the reactor. A dedicated experimental campaign has been performed in order to evaluate the catalyst response to a defined lambda variation pattern of the engine exhaust stream, thus providing the data necessary for the numerical model validation. In fact, goal of the present research activity was to investigate the effect of very fast composition transitions of the engine exhaust typical of the mentioned driving conditions (including fuel cutoffs etc.) on the catalyst performance and on related emissions at the tailpipe.
Article

Made In Space is set to make in space

2019-07-17
Once in orbit, Archinaut One will use additive manufacturing techniques – or 3D printing – to create two 32-foot beams extending out from each side of the spacecraft. As manufacturing progresses, each beam will unfurl two solar arrays that generate up to five times more power than traditional solar panels on spacecraft of similar size.
Article

Orion launch abort system passes full-stress flight test

2019-07-09
The system is designed to lift the crew module off the launch vehicle’s engine stack in case of an emergency and steer it away from danger. According to NASA coverage, engineers have confirmed that the LAS can “outrun a speeding rocket.”
Standard

New and Newly Retreaded Tire Appearance

2019-07-02
CURRENT
ARP6307A
This document is for establishing and addressing anomalies on appearance of new and newly retreaded tires prior to installation on aircraft. It is intended to use cosmetics as well as functionality to make a determination of acceptability. However, if cosmetic appearance is not a requirement, use the inspection criteria from ARP6225, Aircraft Tire Removal Criteria. This ARP does not supersede (E)TSO-C62 minimum requirements, including marking requirements.
Article

Dragonfly will be NASA’s next solar system explorer

2019-06-28
Dragonfly, which might be called a rotorcraft lander, is under development by the Johns Hopkins University Applied Physics Laboratory and has the appearance of an Earth-bound vertical take-off and landing (VTOL) unmanned aircraft system (UAS) or drone.
Standard

Oil, Reference, for "L" Stock Rubber Testing

2019-06-13
WIP
AMS3020B
This specification covers a petroleum-base reference oil. This fluid has been typically used as a reference oil to estimate the ability of elastomeric compounds to conform to specified requirements after immersion at a specified temperature for a specified time and temperature as required by the material.
Article

Can the Air Force reach a 24-hour launch window?

2019-06-13
In a “sources sought” notice titled Rapid Space Launch Initiative, the service is reaching out to American space launch companies to identify technical risks and challenges and develop demonstrations that would result in a launch within 24 hours of a “call up,” versus weeks or months.
X