On-board diagnosis of engine and transmission systems has been mandated by government regulation for light and medium vehicles since the 1996 model year. The regulations specify many of the detailed features that on-board diagnostics must exhibit. In addition, the penalties for not meeting the requirements or providing in-field remedies can be very expensive. This course is designed to provide a fundamental understanding of how and why OBD systems function and the technical features that a diagnostic should have in order to ensure compliant and successful implementation.
This course is designed to provide an overview of the fundamental design objectives and the features needed to achieve those objectives for generic on-board diagnostics. The basic structure of an on-board diagnostic will be described along with the system definitions needed for successful implementation.
This study experimentally investigates the combustion stability in RCCI engines along with the gaseous (regulated and unregulated) and particle emissions. Multifractal analysis is used to characterize the cyclic combustion variations in the combustion parameters (such as IMEP, CA50, Pmax) of the RCCI engine. The investigation is carried out on a modified single-cylinder diesel engine to operate in RCCI combustion mode. The RCCI combustion mode is tested for different fuel premixing ratio (r_p) and diesel injection timing (SOI) at fixed engine speed (1500rpm) and load (1.5 bar BMEP). The particle number characteristics and gaseous emissions are measured using a differential mobility spectrometer (DMS500) and Fourier Transform Infrared Spectroscopy (FTIR) along with Flame Ionizing Detector (FID), respectively. The results indicate that the NOx emissions decrease with advanced SOI while the methane (CH4) emission increases.
The passive pre-chamber is valued for its jet ignition and is widely used in the field of gasoline direct injection (GDI) for small passenger cars, which can improve the performance of lean combustion. However, the scavenging and ignition combustion stability of the engine at low speed is a shortcoming that has not been overcome. Simply changing the structural design to increase the fluidity of MC and PC may lead to a reduction in jet ignition performance, which in turn will affect engine dynamics. This investigation is based on a non-uniformly nozzles distributed passive pre-chamber, which is adjusted according to the working fluid exchange between PC and MC. The advantages and disadvantages of the ignition mode of PC and SI in the target engine speed range are compared through optical experiments on a small single cylinder GDI engine. The results show that with the increase of λ from 1.0 to 1.6, the promotion effect of PCJI on load performance gradually decreases.
To mitigate the NOx emissions from diesel engines, the adoption of exhaust gas recirculation (EGR) has gained widespread acceptance as a technology. Nonetheless, employing EGR has the drawback of elevating soot emissions. The use of hydrogen-enriched air with EGR in a diesel engine (dual-fuel operation), offers the potential to decrease in-cylinder soot formation while simultaneously reducing NOx emissions. The present study numerically investigates the effect of hydrogen energy share and engine load on the formation and emission of soot and NOx emission from hydrogen-diesel dual-fuel engine. The numerical investigation is performed using an n-heptane/H2 reduced reaction mechanism with a two-step soot model in ANSYS FORTE. To enhance the accuracy of predicting dual-fuel combustion in a hydrogen-diesel dual-fuel engine, a reduced n-heptane reaction mechanism is integrated with a hydrogen reaction mechanism using CHEMKIN.
To satisfy recent stringent exhaust gas regulations, large amounts of Rh and Pd have been often employed in three-way catalysts (TWCs) as main active components. However, application of Pt-based TWCs are limited due to their lower thermal stability than Pd. Previously, we found that Pt-based TWCs with a small amount of CeO2 showed high catalytic performance in gasoline vehicles test. Especially, calcined CeO2 at high temperature before Pt loading (cal-CeO2) showed higher catalytic activity than untreated CeO2 after endurance at 1000 degree centigrade. This result could be attributed to higher redox performance and Pt dispersion derived from strong interaction between Ce and Pt. Even though cal-CeO2 has low specific surface area (SSA) given by preliminary calcination, it shows strong effects on catalytic performance. In other word, improvement of its SSA could be the most powerful way to prepare highly active Pt catalysts.
Engine knock is a major barrier to achieving higher engine efficiency by increasing the compression ratio of the engine. It is an abnormal event caused by the autoignition of air-fuel mixture ahead of the propagating flame front. A higher octane number fuel can be a good solution to reduce or eliminate the higher knock intensity and obtain better engine performance. Methanol is a promising alternative fuel, which has a higher octane number and can be produced from conventional and non-conventional energy resources to reduce pollutant emissions. This study compares the combustion characteristics of gasoline and methanol fuels in an optical spark-ignition engine using multiple spark plugs. The experiment was performed on a single-cylinder four-stroke optical engine. A customized metal liner equipped with four circumferential spark plugs was used to generate multiple flame kernels inside the combustion chamber.
A potential route to reduce CO2 emissions from heavy-duty trucks is to combine low-carbon fuels and vehicle electrification/hybridization. Hybridization offers the potential to downsize the engine. Although engine downsizing in the light-duty sector can offer significant fuel economy savings mainly due to increased part-load efficiency, its benefits and downsides in heavy-duty engines are less clear. As there has been limited published research in this area to date, there is a lack of a standardized engine downsizing procedure. This paper aims to use an experimentally validated one-dimensional phenomenological combustion model in a commercial engine simulation software GT-Power alongside turbocharger scaling methods to develop downsized engines from a baseline 6-cylinder (2.2 L/cyl, 26 kW/L) pilot-ignition, direct-injection natural gas engine.
During the development of an Internal Combustion Engine-based powertrain, traditional procedures for control strategies calibration and validation produce huge amount of data, that can be used to develop innovative data-driven applications, such as emission virtual sensing. One of the main criticalities is related to the data quality, that cannot be easily assessed for such a big amount of data. This work focuses on an emission modeling activity, using an enhanced Light Gradient Boosting Regressor and a dedicated data pre-processing pipeline to improve data quality. First thing, a software tool is developed to access a database containing data coming from emissions tests. The tool performs a data cleaning procedure to exclude corrupted data or invalid parts of the test. Moreover, it automatically tunes model hyperparameters, it chooses the best set of features, and it validates the procedure by comparing the estimation and the experimental measurement.
In the perspective of a reduction of emissions and a rapid decarbonization, especially for compression ignition engines, hydrogen plays a decisive role. The dual fuel technology is perfectly suited to the use of hydrogen, a fuel characterized by great energy potential. In fact, replacing, at the same energy content, the fossil fuel with a totally carbon free one, a significant reduction of the greenhouse gases, like carbon dioxide and total hydrocarbon, as well as of the particulate matter can be obtained. The dual fuel with indirect injection of gaseous fuel in the intake manifold, involves the problem of hydrogen autoignition. In order to avoid this difficulty, the optimal conditions for the injection of the incoming mixture into the cylinder were experimentally investigated. All combustion processes have been carried out on a research engine with optical access. The engine speed has been set at 1500 rpm, while the EGR valve has been deactivated.
The gasoline particulate filter (GPF) represents a practical solution for particulate emissions control in light-duty gasoline-fueled vehicles. It is also seen as an essential technology in North America to meet the upcoming US EPA tailpipe emission regulation, as proposed in the “Multi-pollutant Rule for Model Year 2027”. The goal of this study was to introduce advanced, uncoated GPF products and measure their particulate mass (PM) reduction performance within the existing US EPA FTP vehicle testing procedures, as detailed in Code of Federal Regulations (CFR) part 1066. Various state-of-the-art GPF products were characterized for their microstructure properties and lab-bench performance for pressure drop and filtration efficiency, were then subjected to an EPA-recommended 2000mile on-road break-in, and finally were tested on an AWD vehicle chassis-dyno emissions test cell at both 25C and -7C ambient conditions.