On-board diagnosis of engine and transmission systems has been mandated by government regulation for light and medium vehicles since the 1996 model year. The regulations specify many of the detailed features that on-board diagnostics must exhibit. In addition, the penalties for not meeting the requirements or providing in-field remedies can be very expensive. This course is designed to provide a fundamental understanding of how and why OBD systems function and the technical features that a diagnostic should have in order to ensure compliant and successful implementation.
The purpose of the Air Generation System is to provide a constant supply of conditioned fresh air to meet the necessary oxygen availability and to prevent carbon dioxide (CO2) concentrations for the occupants in an aircraft. The engine bleed energy or electrical load energy consumed towards this circumstance accounts to be approx. 5% of total fuel burn and in turn, contributes to the global emissions of greenhouse gases. This paper studies the improvement areas of the present conventional system such as fuel burn consumption associated with an aircraft environmental control system (ECS) depending on, the amount of bleed and ram air usage, electric power consumption. Improved systems for propulsion, power generation, sustainability, hybridization, and environmental control can be desirable for an aircraft.
This course is designed to provide an overview of the fundamental design objectives and the features needed to achieve those objectives for generic on-board diagnostics. The basic structure of an on-board diagnostic will be described along with the system definitions needed for successful implementation.
In Crank- Train system, the prime objective of crankshaft is to facilitate the transformation of reciprocating motion of connecting rod into rotational motion at flywheel end. Moreover, the contribution of mass from crankshaft is in the same order as of Flywheel assembly mass which accounts to approximately 40 to 50% of total mass of engine. Therefore, to accomplish the development of an efficient engine it is vital to optimize the crankshaft based on simulation parameters like balance rate, mass, torsional frequency, web shear stress etc. In the given work, crankshaft has been designed and developed for an Engine used in light duty commercial vehicle. The defined work demonstrates the application of 1D Simulation tool AVL Excite in development phase of the Engine. To establish an equilibrium between the weight and simulation guidelines, many iterations of models were evaluated and finally we were able to achieve mass reduction of nearly 8% from the base model.
This study experimentally investigates the combustion stability in RCCI engines along with the gaseous (regulated and unregulated) and particle emissions. Multifractal analysis is used to characterize the cyclic combustion variations in the combustion parameters (such as IMEP, CA50, Pmax) of the RCCI engine. The investigation is carried out on a modified single-cylinder diesel engine to operate in RCCI combustion mode. The RCCI combustion mode is tested for different fuel premixing ratio (r_p) and diesel injection timing (SOI) at fixed engine speed (1500rpm) and load (1.5 bar BMEP). The particle number characteristics and gaseous emissions are measured using a differential mobility spectrometer (DMS500) and Fourier Transform Infrared Spectroscopy (FTIR) along with Flame Ionizing Detector (FID), respectively. The results indicate that the NOx emissions decrease with advanced SOI while the methane (CH4) emission increases.
To satisfy recent stringent exhaust gas regulations, large amounts of Rh and Pd have been often employed in three-way catalysts (TWCs) as main active components. However, application of Pt-based TWCs are limited due to their lower thermal stability than Pd. Previously, we found that Pt-based TWCs with a small amount of CeO2 showed high catalytic performance in gasoline vehicles test. Especially, calcined CeO2 at high temperature before Pt loading (cal-CeO2) showed higher catalytic activity than untreated CeO2 after endurance at 1000 degree centigrade. This result could be attributed to higher redox performance and Pt dispersion derived from strong interaction between Ce and Pt. Even though cal-CeO2 has low specific surface area (SSA) given by preliminary calcination, it shows strong effects on catalytic performance. In other word, improvement of its SSA could be the most powerful way to prepare highly active Pt catalysts.
Engine knock is a major barrier to achieving higher engine efficiency by increasing the compression ratio of the engine. It is an abnormal event caused by the autoignition of air-fuel mixture ahead of the propagating flame front. A higher octane number fuel can be a good solution to reduce or eliminate the higher knock intensity and obtain better engine performance. Methanol is a promising alternative fuel, which has a higher octane number and can be produced from conventional and non-conventional energy resources to reduce pollutant emissions. This study compares the combustion characteristics of gasoline and methanol fuels in an optical spark-ignition engine using multiple spark plugs. The experiment was performed on a single-cylinder four-stroke optical engine. A customized metal liner equipped with four circumferential spark plugs was used to generate multiple flame kernels inside the combustion chamber.
Since Non-Road Mobile Machinery (NRMM) China stage IV legislation has been implemented from 2023, some engines within maximum rated power between 37 to 560 kW are required for gaseous emissions, particulate matter(PM) and particulate number (PN) limitation, evaluated over testing cycle of Non-Road Transient Cycle (NRTC) and Non-Road Steady Cycle (NRSC). The pollutants from diesel engines, widely used in NRMM applications, can be controlled using aftertreatment systems which are comprise of a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF), or optionally a selective catalytic reduction (SCR). In this presentation, a compact D-DPF design is introduced and discussed on application in harvesters, tractors, and forklifts. Because harvesters have higher exhaust gas temperature than other applications, more passive regeneration behaviors were occurred during working conditions.
A DMS500 engine exhaust particle size spectrometer was employed to characterize the effects of injection strategies on particulates emissions from a turbocharged gasoline direct injection (GDI) engine. The effects of operating parameters (injection pressure, secondary injection ratio and secondary injection end time) on particle diameter distribution and particle number density of emission was investigated. The experimental result indicates that the split injection can suppress the knocking tendency at higher engine loads. The combustion are improve, and the fuel consumption are significantly reduce, avoiding the increase in fuel pump energy consumption caused by the 50 MPa fuel injection system, but the delayed injection increases particulate matter emissions.