Refine Your Search

Topic

Author

Affiliation

Search Results

Technical Paper

THE NEED OF PERSONALIZATION AND OPPORTUNITIES IN AUTONOMOUS VEHICELS AND SHARED MOBILITY

2019-11-21
2019-28-2520
Shared mobility and Autonomous shared mobility take major share in Mobility 4.0. Personalization in a shared mobility will play a significant role in customer engagement in Autonomous world. In case of personal vehicle each customer will have their own personal settings in their own vehicle; in case of Autonomous shared mobility or shared mobility, we can satisfy individual customer need only by personalizing the vehicle for each individual user needs. This will give a cognitive feel of personal vehicle in a shared environment. We need technologies in improving vehicle interior and exterior systems and design to address personalization. We will be discussing on feasible opportunities of personalization and with illustrations in Vehicle Interior Cabin Space, Seat comfort, Compartments, Vehicle interior & Exterior Access / Controls.
Technical Paper

FOUR WAY ADJUSTABLE HEAD RESTRAINT SYSTEM

2019-11-21
2019-28-2528
To reduce the incidence of whiplash-associated disorders caused by rear impacts, head restraints should be closer to the head which decreases the amount of relative motion and it is believed to reduce the risk of soft tissue neck injury. Drivers are raising complaints that the head restraint causes discomfort by interfering with their preferred head position, forcing them to select a more reclined seat back angle [1]. This paper is about the importance of head restraint system and how it can be improved by adjusting the angle between the head restraint and passenger`s head. It is essential to carry out research on head restraint that can be adjusted in forward and backward direction letting the cost of seats remain in budget.
Technical Paper

MITIGATION FOR EDGE CORROSION PROTECTION FOR AUTOMOTIVE BODIES

2019-11-21
2019-28-2561
TITLE: MITIGATION FOR EDGE CORROSION PROTECTION FOR AUTOMOTIVE BODIES. Keyword: Edge corrosion, Edge protection, Rust on edges, Corrosion mitigation. Objective: A major challenge to automotive industry is to protect the vehicle from corrosion in varying environment with respect to different service conditions. One of the main types of corrosion that affects aesthetic look is edge corrosion on sheet metal. Mostly edge is acting as starting point of corrosion due to unprotected metal exposed to environment. A special attention to be given to exposed edges to protect from rust formation. Methodology: To mitigate corrosion in visible area, various solution proposed in manufacturing process, material usage, sealer application, BIW design. Samples were prepared as per design of experiments with respect to manufacturing process condition and subjected for testing. Results: Proposed solutions were validated in manufacturing process line and reports are discussed.
Technical Paper

BlockChain - A disruptive technology in Automotive Industry

2019-11-21
2019-28-2436
When i decided to buy a second hand car from a dealer to learn driving, i was sceptical of the mileage usage for which a particular price was charged. Though the well know dealer told me a about the car, its previous usage, the fact that there were no accidents, and so on, there was no reliable way to verify what the dealer was offering. In order to solve such issues, we are looking at a disruptive technique which will cause a complete paradigm shift - by using blockchain technique. This paper talks about the basics of the blockchain technology and its relevance in automotive industry. We also look at some real life scenarios, where this technology helps to build reliability as one of the implicit requirements. We will start looking at how the block chain will help to reliably select the right components in the assembly line. Also we look at different aspects of software architecture like security and how blockchain can provide solutions in this area.
Technical Paper

Development of Emergency Vehicle Approaching Alert System (EVAAS)

2019-11-21
2019-28-2465
This paper discusses the need for Emergency Vehicle Approaching Alert System (EVAAS) and building of EVAAS components for OTT (over- the-top content), and Media providers. According to a study by the Indian Journal of Surgery in 2006, 80 per cent of road accident victims in India do not receive any emergency medical care (Ambulance) within this ‘golden hour - the first hour after a traumatic injury, when emergency treatment is most likely to be successful.’ Due to increasing population and constructions of Roads and Buildings, Emergency Vehicles are not able to reach the desired location. Hence, there is a need of an Emergency Vehicle Approaching Alert System (EVAAS) in INDIA.
Technical Paper

Changes in user experiences of electric vehicles

2019-11-21
2019-28-2489
Research Objective The objective of the paper is to research what are the changes in experiences being brought about due to the advent of Electric Vehicles (EVs). EVs are silent, have less complex propulsion system, and have free space under the hood, amongst other things. Each change brings about both good and bad experiences across the spectrum of users. Some of the bad experiences can be safety incidents leading to death as well. Researching the areas that are harmful to end users, including pedestrians, will be our focus area. Methodology Our methodology will look at the changes at the vehicle architecture level which are inherent to the EV design. Research how are the experiences so far due to these changes. Are these just inconveniences or safety hazards? EVs have excellent NVH characteristics. A farmer may love a silent tractor, but a racing enthusiast may not like a relatively silent sports car.
Technical Paper

Location based emergency call enabler

2019-11-21
2019-28-2457
M. Priyanka, Mahindra & Mahindra, India Sai Himaja Nadimpalli , Mahindra & Mahindra, India Keywords-Safety, Connectivity, GPS Research and/or Engineering Questions/Objective: There are many times the driver or co-passenger can experience emergency conditions whenever the vehicle is running or it is in static. These kind of situations are tough to handle even if one is victimized . The victim can be rescued on time if proper information about the situation would reach his friends or family . Limitations: In existing system, if the accidental crash happens then signal from airbag unit will wake up the mobile, Once this wake up call happens,it will activate the gsm module. The emergency contacts stored in the mobile will be dialed up and the victim can convey his emergency situation through that. The driver will be rescued only if crash happens. There is no system to rescue the driver if heart attack happens when he is driving.
Technical Paper

Development of low cost life saving system for Automotive vehicles during Road Accidents.

2019-11-21
2019-28-2460
According to research study 45% of death cause due to not getting help on time to the injured person. Research has proven that if injured person is not found any option of help then they also loose the power to fight such critical situation due to psychological effect. When vehicle met accident, people are not getting on time support, this delay is the major cause of death in developing nations. Presently there is no any robust system available in market for passenger & commercial vehicles which helps to provide on time help to the injured persons & saves human life. In current situation low cost life saving device is need of our society. This paper deals with the design & development of the low cost-life saving device. This paper also comprises the scenario when any vehicle meet an accidents within certain speed limit then how the intelligent life saving device will work & save the life's.
Technical Paper

A new appraisal of the thermomechanical behaviour of a hybrid composite brake disc in a formula vehicle

2019-11-21
2019-28-2572
A new appraisal of the thermomechanical behaviour of a hybrid composite brake disc in a formula vehicle Research Objective This paper presents a hybrid composite brake disc with reduced Un Sprung Weight clearing thermal and structural analysis in a formula vehicle.Main purpose of this study is to analyse thermomechanical behaviour of composite brake disc for a formula vehicle under severe braking conditions. Methodology In the disk brake system, the disc is a major part of a device used for slowing or stopping the rotation of a wheel. Repetitive braking of the vehicle leads to heat generation during each braking condition. Based on the practical understanding the brake disc was remodelled with unique slotting patterns and grooves, using the selected aluminium alloy of (AA8081) with reinforcement particle of Silicon carbide (SiC) and Graphite (Gr) as a hybrid composite material for this proposed work.
Technical Paper

FABRICATION AND WEAR CHARACTERISTICS BASALT FIBER REINFORCED POLYPROPYLENE MATRIX COMPOSITES

2019-11-21
2019-28-2570
Generally brake pads are manufacturing by use of asbestos materials, these materials are chemically harmful and toxic, affects human health. The present investigation fabricates polypropylene composites with mixing constant volume [5 Vol.%] of alumina nano particles and different volume percentages [0%, 5%, 10% & 15%] of basalt fibre by hand layup compression technique. The wear characteristics of polypropylene matrix composites were tested by dry sliding condition using pin on disc apparatus configuration with hardened steel counter-face at elevated temperature. The load was applied 30N to 70N with the interval of 20N and varying of sliding speed 300 rpm to 900rpm with the interval of 300rpm for the time period of 0-180 sec. The wear rate was decreases with addition of alumina nano particle and also increases the frictional force for the effect of basalt fibre content present in the composites. The co-efficient of friction was increases from 0.1 to 0.66 under normal loading condition.
Technical Paper

Design & analysis of 2 point aluminum upper control arm in modular multi link rear suspension system

2019-11-21
2019-28-2564
In current automobile market, due to the need of meeting future CO2 limits and emission standards, demand for hybrid systems is on the rise. In general, the requirements of modern automobile architecture demands modular chassis structure to develop vehicle variants using minimum platforms. The multi-link modular suspension system provides ideal solution to achieve these targets. To match ideal stiffness characteristics of system with minimum weight, aluminum links are proving a good alternative to conventional steel forged or stamped linkages. Design of current 2-point link (Upper Control Arm) is based on elasto-kinematic model developed using standard load cases from multi body dynamics. CAD system used is CATIA V5 to design upper control arm for rear suspension. This arm connects steering knuckle & rear sub frame. For Finite Element Analysis we used Hyperworks CAE tool to analyze design under all load cased & further optimization is done to resolve highly stressed zones.
Technical Paper

Development of low cost closed crankcase ventilation with oil mist separation system on light duty diesel engine.

2019-11-21
2019-28-2578
Currently automotive industry is facing bi-fold challenge of reduction in Greenhouse gases emissions as well as low operating cost. On one hand Emission regulations are getting more and more stringent on other hand there is major focus no customer value proposition. Engine blow by gases are one of the source of Greenhouse gases emission from engine. Blow by gases not only consist of unburn hydrocarbons but also carry large amount of oil. If oil is not separated from these gases, it will led to major oil consumption and hence increase total operating cost of Vehicle. In this paper, effort has been taken to develop a low cost closed crank case ventilation with oil mist separation system on diesel engine.
Training / Education

Basics of Silicone Rubber Science and Technology

2019-10-14
Silicone rubber is comprised of inorganic-organic polymers. These materials consist of an inorganic backbone with organic side groups attached to silicon atoms. This family of polymers possesses unmatched versatility giving the formulator and user multiple forms and methods to cross link the polymers into rubber materials having the widest service temperature range of any rubber material. This course is designed to provide the participant with a thorough understanding of silicone’s engineering characteristics.
Technical Paper

Self-affinity of an Aircraft Pilot's Gaze Direction as a Marker of Visual Tunneling

2019-09-16
2019-01-1852
For the last few years, a great deal of interest has been paid to crew monitoring systems in order to address potential safety problems during a flight. They aim at detecting any degraded physiological and/or cognitive state of an aircraft pilot or crew, such as visual tunneling, also called inattentional blindness. Indeed, they might have a negative impact on the performance to pursue the mission with adequate flight safety levels. One of the usual approaches consists in using sensors to collect physiological signals which are then analyzed. Two main families exist to process the signals. The first one combines feature extraction and machine learning whereas the second is based on deep-learning approaches which require a large amount of labeled data. In this work, we focused on the first family.
Technical Paper

Improving competitiveness of Additive Manufacturing Aerospace serial parts

2019-09-16
2019-01-1900
The interest of selective laser melting technology for aerospace parts is very high due to their high complexity and their freedom of design which allow functions integration. However, the competitiveness of Laser Beam Melting (LBM) machines for aerospace industry is limited by two major road blocks. On the one hand, basic parametric set sold with LBM machines are more oriented to historical qualification than productivity rates. For instance, the ongoing qualification on EOS M290 by AIRBUS COMMERCIAL AIRCRAFT only enables us to produce a hundred pieces per machine per year. On the other hand, wasted times between two consecutive manufacturing batches are significant and are impacting the yearly output of the machines. The present project focuses on two activities, focusing on the largest available machines, XLINE2000R and M400, in order to maximize the amount of pieces per build.
Technical Paper

Orbital Drilling Optimization in High Speed Machining and Fatigue Life Enhancement by Orbital Roller Burnishing : Application to an Aluminum Alloy

2019-09-16
2019-01-1861
Orbital drilling has proved to be advantageous to achieve aeronautical-level quality drilling (surface roughness, geometry control…) fully adapted for complex assemblies in a single operation. However, compared to conventional drilling method, this process leads to a drastic change in structure's fatigue life probably due to a non-optimised level of residual stress. The control of the mechanical behaviour of parts obtained by orbital drilling is the goal of the European-CleanSky collaborative R&D project RODEO (Robotized Orbital Drilling Equipment and Optimized Residual Stresses, GA no.738219). In this work, an orbital drilling unit (ORBIBOT) allowing high-speed-machining conditions was developed by PRECISE France, that can be integrated on a lightweight industrial robot. Cutting parameters were determined through an original Tool-Material Couple optimization strategy dedicated to orbital drilling, developed with MITIS Engineering and carried out on aluminium alloy 2024-T351.
Standard

Heat Treatment of Low-Alloy Steel Parts, Minimum Tensile Strength 220 ksi (1517 MPa) and Higher

2019-07-15
CURRENT
AMS2759/2J
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS2759, establishes the requirements for heat treatment of low-alloy steel parts to minimum ultimate tensile strengths of 220 ksi (1517 MPa) and higher. Parts are defined in AMS2759. The requirements for heat treatment of alloy Aermet100 are no longer part of this specification and can be found in AMS2759/3. Due to the limited hardenability of these materials, size limits have been added to this specification.
X