Refine Your Search

Topic

Author

Affiliation

Search Results

Technical Paper

C123 Methodology for concept design of the Chassis Frame

2019-11-21
2019-28-2534
Objective This paper explores the usage of Altair simulation driven concept process, C123 for developing the chassis frame of the SUV along with Multidisciplinary optimisation tool. C123 process is useful for strategic & systematic usage of optimisation to generate design alternatives, trade-off information, best balanced designs, design sensitivities, to actively support the concept development process on daily basis. Methodology C123 is used for developing initial concept design of the chassis frame of the SUV. C123 process is independent of vehicle architectures, manufacture process (e.g. extrusions, sheet metal) & material selection (e.g. metals, composites, mixed etc.) and platform sharing strategy. C1 process is used for identification of optimum Structural Layout, C2 is for rapid optimum Sizing of idealized Sections, C3 is used for detailed optimum Sizing of Manufacturable Sections. Automatic process is used for handling pre and post processing process very efficiently.
Technical Paper

High rigidity and light weight bumper material development in India

2019-11-21
2019-28-2553
Vehicle weight reduction becomes important at the view point of fuel efficiency improvement and CO2 reduction in India also as well as developed countries. With this background, High tensile and Super high tensile steel application has become increasing. Similary, weight reduction of big plastic parts like bumper face is one of the most important items, so Honda has developed Thin-wall and light weight bumper face. In the development of light weight bumper, rigidity, impact strength and flowability which are main requirement are cotradictory property. It is necessary to develop new material to achieve this technical concern. Moreover, we verified part shape and thickness optimization to achieve part requirement. Established high property material and part manufacturing technology were applied for current CITY firstly, and it has been expanded to other models sequentially to contribute weight reduction for Honda vehicles.
Technical Paper

An alternate cost effective material for rocker arm for heavy commercial vehicles

2019-11-21
2019-28-2550
Rocker arm in internal combustion engine is very important part which transfer the cam motion and force to the valve. In heavy commercial vehicles, the engine components are design for an infinite life (considerable higher than other components). Recently industries are working for light weight and optimized cost material. Hence it is required to have an optimized cost effective design of rocker arm without affecting its performance. A rocker arm should meet the stiffness and strength requirement. The objective of this study is to find out the alternate material for rocker arm which can provide the similar strength & stiffness as conventional rocker arm material. To achieve the performance and cost target, alternate material cast iron has been evaluated for rocker arm. Cast iron is lighter than the forged steel rocker arm, also it has a good frictional characteristic. Further bush is eliminated from the rocker arm assembly due to self-lubricant property of the cast iron rocker arm.
Technical Paper

Injury Reduction in Vehicle to Pedestrian Collision using Deployable Pedestrian Protection System in Vehicles

2019-11-21
2019-28-2551
Head injuries are the main source of road fatalities in when a pedestrian is involved in an accident with the vehicle. The frontal part of vehicle such as engine hood, lower-windshield area and A-pillars are the possible location of head impact in such accidents. The head impact with hard points located in these areas result in the fatal head injuries. The effect of impact can be reduced by using the deployable pedestrian protection systems (DPPS) such as hood-lifters and windshield airbag in the vehicle. The study shows how these systems are effective in reducing the fatalities in pedestrian accidents and how to evaluate the performance of these deployable systems.
Technical Paper

MOLD IN COLOR DIAMOND WHITE ASA MATERIAL FOR AUTOMOTIVE EXTERIOR APPLICATION

2019-11-21
2019-28-2562
In this paper, mold in color diamond white ASA material has been explored for front bumper grill, fender arch extension and hinge cover applications. Other than aesthetic requirements, these parts have precise fitment requirement under sun load condition in real world usage profile. Structural durability of the design was validated by virtual engineering. Part design and material combinations with better tooling design iterations were analysed by using mold flow analysis. Complete product performances were validated for predefined key test metrics such as structural durability, thermal aging, cold impact, scratch resistance, and weathering criteria. This part met required specification. This mold in color ASA material-based parts has various benefits such as environmentally friendly manufacturing by eliminating environmental issues of coating, easily recycled, and faster part production because intended color achieved in one step during molding.
Technical Paper

STATISTICAL ANALYSIS OF LOW CYCLE FATIGUE PROPERTIES IN METALS FOR ROBUST DESIGN

2019-11-21
2019-28-2576
Objective: In ground vehicle industry, strain life approach is commonly used for predicting fatigue life. This approach requires use of fatigue material properties such as fatigue strength coefficient (σf'), fatigue strength exponent (b), fatigue ductility coefficient (εf'), fatigue ductility exponent (c), cyclic strength coefficient (K′) and cyclic strain hardening exponent (n′). These properties are obtained from stable hysteresis loop of constant amplitude strain-controlled uniaxial fatigue tests. Usually fatigue material properties represent 50th percentile experimental data and doesn't account possible material variation in the fatigue life calculation. However, for robust design of vehicle components, variation in material properties need to be taken into account. In this paper, methodology to develop 5th percentile (B5), 10th percentile (B10) and 20th percentile (B20) fatigue material properties are discussed.
Technical Paper

Telescopic Rear Wiper Arm with Cam and Roller Mechanism for Increased Wiping Area

2019-11-21
2019-28-2407
All round visibility is critical for safety of vehicle and road users. A vehicle must be designed in such a way that the driver encounters minimal hindrance for visibility of vehicle surroundings. This is even more essential during poor visibility conditions like during rain, snow, heavy fog etc. At present, wiper systems play an essential role in providing better visibility. There are other technological aides like cameras, sensors etc., but they must be considered as secondary systems, the must not be relied upon. Current wiper systems for front windscreen are very efficient, in terms of wiping area. But the wiper systems for rear windscreen are starkly opposite. The rear wiper arm length is very low, mainly due to low height of rear windscreen. This combined with the motion of wiper arm in an arc, results in low wiping area, leading to poor visibility through rear mirror. This paper addresses this problem with a simple solution - Telescopic Wiper Arm with Cam and Roller Mechanism.
Technical Paper

A Self-Intelligent Traffic Light Control System based on Traffic Environment using Machine Learning

2019-11-21
2019-28-2459
In this paper, we will detect and track vehicles on a video stream and count those going through a defined line and to ultimately give an idea of what the real-time on street situation is across the road network. Our major objective is to optimize the delay in transit of vehicles in odd hours of the day. It uses YOLO object detection technique to detect objects on each of the video frames And SORT (Simple Online and Realtime Tracking algorithm) to track those objects over different frames. Once the objects are detected and tracked over different frames a simple mathematical calculation is applied to count the intersections between the vehicles previous and current frame positions with a defined line. At present, the traffic control systems in India, lack intelligence and act as an open-loop control system, with no feedback or sensing network. Present technologies use Inductive loops and sensors to detect the number of vehicles passing by.
Technical Paper

Optimization of the critical parameters affecting the fuel lid performance

2019-11-21
2019-28-2413
Fuel lid is one of the parts which are mostly operated mechanically by the end user while filling the fuel. Therefore part design should be done in such a manner that it can be operated smoothly without any hassles. The conventional steel fuel filler doors are of two types: Three-piece type fuel filler doors also known as the dog-leg type and two-piece type fuel filler doors also known as the butterfly type. Both types of fuel filler doors have a pin that acts as a rotational hinge axis about which the fuel filler door opens and closes. Depending on the styling and shape of the side body outer, fuel lid type is decided. In the current study, dog-leg type fuel lid is considered. The factors that primarily affect the opening-closing performance are the weight of fuel lid, hinge axis, and the friction at the hinge area. The orientation of the hinge axis is derived from the profile of the side body outer panel. The fuel lid weight and hinge axis are decided in the initial design stage.
Technical Paper

Study on effect of HVAC Air Flow Distribution on Windows Fogging

2019-11-21
2019-28-2414
Windshield & Windows fogging up in cars has long been a topic of interest & concern. Lot of research has already been put into Front/Rear windshield fogging up issue and, Defrosters, Heated Windshields have been designed to remove the fog effectively. However, Windows Fogging up is still one of the major concerns faced while driving, as it obscures the drivers' field of vision and raises safety concerns. Windows fogging up is a phenomenon in which Moisture is condensed on the glass of the window. It is classified into two categories - Inside Fogging and Outside Fogging. When Ambient temperature is lower than the cabin temperature, the moisture is condensed on the inside surface of the glass. In this case the moisture is added inside the cabin by the occupants when they exhale air. Similarly when the Cabin temperature is lower than the ambient temperature, the moisture from atmosphere is condensed on the outer surface of the glass.
Technical Paper

In-Vehicle Directional Audio Streaming

2019-11-21
2019-28-2448
In-Vehicle Infotainment has evolved greatly over years from a simple tuner based radio with a small LED display to a complex system with highly intelligent interactive HMI which can mirror the smart phone. The full-fledged entertainment features like watching videos are restricted to only rear passengers. In drive mode, drivers are limited with access to only audio to avoid driver distraction. Rear passengers and drivers are classified into different audio zones. Each of the rear passengers are equipped with headsets so that audio merging with driver zone can be avoided. This leads to passenger discomfort, as many passengers would not prefer to hook up with headset all the time. Now the automotive world is envisioned to reach fully autonomous mode where there is no driver and every passenger is interested to listen to music/video of diverse interest. The audio zones in autonomous car need not be zonified or linear. Circular audio zone can also be a good choice for autonomous cars.
Technical Paper

Miniaturized and sleek protective device

2019-11-21
2019-28-2535
A miniaturized and sleek protective device M. Priyanka, Mahindra&Mahindra, India D. Boobala Krishnan*, Mahindra&Mahindra, India T.Vijayan, Mahindra& Mahindra, India Keywords-Fuse, Lightweight. Research and/or Engineering Questions/Objective: Now-a-days there is lot of advancement coming in automobiles. Earlier the electronics were used in engine and engine compartment areas. Now all hydraulics and transmission have been operated by electronics. The role of electronics like sensors, actuators increasing day by day for lifting and moving operations. With increase in electronics circuit, there is complex in wiring harness and packaging space for fuse box is premium Limitations: Limitations of placing other devices. Occupy more space and weight in the vehicle. Packing constraint due to vibration and thermal management issues. Methodology: Two different fuse of same rating can be given in one fuse and we can reduce the wire size.
Technical Paper

FABRICATION AND WEAR CHARACTERISTICS BASALT FIBER REINFORCED POLYPROPYLENE MATRIX COMPOSITES

2019-11-21
2019-28-2570
Generally brake pads are manufacturing by use of asbestos materials, these materials are chemically harmful and toxic, affects human health. The present investigation fabricates polypropylene composites with mixing constant volume [5 Vol.%] of alumina nano particles and different volume percentages [0%, 5%, 10% & 15%] of basalt fibre by hand layup compression technique. The wear characteristics of polypropylene matrix composites were tested by dry sliding condition using pin on disc apparatus configuration with hardened steel counter-face at elevated temperature. The load was applied 30N to 70N with the interval of 20N and varying of sliding speed 300 rpm to 900rpm with the interval of 300rpm for the time period of 0-180 sec. The wear rate was decreases with addition of alumina nano particle and also increases the frictional force for the effect of basalt fibre content present in the composites. The co-efficient of friction was increases from 0.1 to 0.66 under normal loading condition.
Technical Paper

Investigation in Bonding Conditions of CF/Epoxy – PP Hybrid Structures Manufactured by Hybrid Single Shot Method

2019-10-28
2019-01-2595
The hybrid single shot method is a novel manufacturing technique which allows to form and bond CF/Epoxy sheet with the injected thermoplastic in a single injection process. This process is promising to overcome the drawbacks of the traditional hybrid structure manufacturing methods by reducing the cycle time, energy consumption, tool, and machinery cost which are the concerns of automakers. In this process, polypropylene (PP) injected over the pre-heated CF/Epoxy prepreg insert. PP is widely used in automotive applications such as bumpers, dashboards, side-sills while CF/Epoxy prepreg has a great potential to enhance the mechanical properties of the hybrid component. Insert material is formed by the pressure of PP and bonded with the thermoplastic part by taking the advantages of polymer heat and the tackiness of prepreg. The final part is promising to combine the inherent properties of these two material while enhancing their weaknesses.
Technical Paper

A Self-Intelligent Traffic Light Control System based on Traffic Environment using Machine Learning

2019-10-28
2019-01-2613
In this paper, we will detect and track vehicles on a video stream and count those going through a defined line and to ultimately give an idea of what the real-time on street situation is across the road network. Our major objective is to optimize the delay in transit of vehicles in odd hours of the day. It uses YOLO object detection technique to detect objects on each of the video frames And SORT (Simple Online and Realtime Tracking algorithm) to track those objects over different frames. Once the objects are detected and tracked over different frames a simple mathematical calculation is applied to count the intersections between the vehicles previous and current frame positions with a defined line. At present, the traffic control systems in India, lack intelligence and act as an open-loop control system, with no feedback or sensing network. Present technologies use Inductive loops and sensors to detect the number of vehicles passing by.
Technical Paper

Passenger Evacuation and Safety System for case of Crash and Drowning

2019-10-28
2019-01-2606
Vehicle submersion has one of the most astounding casualty rates of a solitary vehicle mischance and, as per drowning statistics from the World Health Organization, may contribute up to 2,000– 5,000 lives annually when all of the industrialized countries are considered. The system which will aid passengers in evacuating in scenario of drowning. The vehicle safety system will facilitate the passengers if a vehicle is submersed in water by untying the seat belt and lowering the window. The setup will have a circuit independent to the main automotive circuit and will consist of an array of 4 pressure sensors whose distance will be predetermined and will be placed in such a way that if the vehicle falls in any way possible, the pressure sensors sense the data. The system will also have a water sensor placed at the engine compartment, as at this position the water comes at a very early stage in a case of vehicle drowning and very unlikely during other case for example washing or raining.
Training / Education

Introduction to Advanced High Strength Steel Applications and Manufacturing

2019-10-08
Advanced High Strength Steels (AHSS) are now commonly used in automotive body structural applications. The high strength of this grade classification is attractive to help reduce mass in the automotive body through reduction in thickness. Strength also supports improvements in safety requirements so that mass increases are minimized. In some specific grades of AHSS, energy absorption is possible in addition to the high strength. This course will review the definition and properties of AHSS and cover several common applications in automotive body structures.
X