Refine Your Search




Search Results

Technical Paper


Keywords – Miniaturization, Low Profile (LP) Relays, Low Profile (LP) Fuses, Fuse box, Wiring Harness Research and/or Engineering Questions/Objective With the exponential advancement in technological features of automobile’s EE architecture, designing of power distribution unit becomes complex and challenging. Due to the increase in the number of features, the overall weight of power distribution unit increases and thereby affecting the overall system cost and fuel economy. The scope of this document is to scale down the weight and space of the power distribution unit without compromising with the current performance. Methodology Miniaturization involves replacing the mini fuses and J-case fuses with LP mini and LP J-case fuses respectively. The transition doesn’t involve any tooling modification and hence saves the tooling cost.
Technical Paper


KEYWORDS: Steering System, Engine Vibrations, Dynamics, Modal Testing, Modal Analysis, ABSTRACT - In modern agriculture, the tractor’s use is indispensable and essential for various operations like cultivation, soil preparation, pulverization and many more. However, despite being efficient machines, tractors may be subjected to different level of vibrations in various parts of their structure. The vibration often plays the key cause of invalidation and component failures and also, affecting the ride and comfort. Since it is known that such vibration factors can affect the behavior in many ways, an understanding of their dynamic response is warranted. In this paper, case study related to reduction of steering system vibration is presented. Objective and Background: Vibration reduction is linked with the reduction either at source or on path. For such, it is necessary to know the reality of machines, component and mechanisms to mitigate the vibration levels on the tractor.
Technical Paper

Thermal Challenges in Automotive Exhaust System through Heat Shield Insulation

While advanced automotive system assemblies contribute greater value to automotive safety, reliability, emission/noise performance and comfort, they are also generating higher temperatures that can reduce the functionality and reliability of thesystem over time. Thermal management and insulation are extremely important and highly demanding in BSVI, RDE and Non-IC engine operating vehicles. Passenger vehicle and Commercial vehicle exhaust systems are facing multiple challenges such as packaging constraints, weight reduction andthermalmanagement requirements.Frugal engineering is mandatory to develop heat shield in the exhaust system with minimum heat loss. The focus of the paper is to design, develop and validate heat shield products with different variables such as design gap, insulation material, sheet metal thickness and manufacturing processes. 1D and 3D computational simulations are performed with different gaps from 3 mm to 14 mm are considered.
Technical Paper

Development of low cost life saving system for Automotive vehicles during Road Accidents.

According to research study 45% of death cause due to not getting help on time to the injured person. Research has proven that if injured person is not found any option of help then they also loose the power to fight such critical situation due to psychological effect. When vehicle met accident, people are not getting on time support, this delay is the major cause of death in developing nations. Presently there is no any robust system available in market for passenger & commercial vehicles which helps to provide on time help to the injured persons & saves human life. In current situation low cost life saving device is need of our society. This paper deals with the design & development of the low cost-life saving device. This paper also comprises the scenario when any vehicle meet an accidents within certain speed limit then how the intelligent life saving device will work & save the life's.
Technical Paper

Development of Systematic Technique for Design of Electric Motor Mounting System in EV/ HEV Application

Last decade has been era of environmental awareness. Various programs have launched for making devices and appliances eco-friendly. This initiative has lead automobile industry toward hybridization and now total electrification of vehicles. Electric motor produce high frequency vibration along with high torque. Hence it needs to be isolated properly & carefully as these vibrations can damage other automobile parts. Dynamic response of electric motor is different from response of IC engines, so use of engine mounting design method is not suitable for designing mounting system for electric motor mounting system. In design of electric motor mounting, position and orientation of elastomeric mounts plays important role. Mounts used in passive vibration isolation are made up of elastomeric material which are stiff and resilient in nature.
Technical Paper

Design optimization for Engine mount

The mounting of an engine plays important role in controlling the vibration transmissibility, alignment of transmission unit within specific limit. Design of any mounting system mainly depends on stiffness, allowed deformation and transmissibility of force, natural frequency and size w.r.t space constraints etc. This paper helps to study the behavior of engine mount with different layer of rubber with defer stiffness. Firstly the design of front engine mount with single rubber layer according to space constraint in vehicle and then analysis is done to determine the deformation and various results using CAE technique. As per the results, design is modified with varying layer of rubber pad and again analysis is done with same boundary condition followed by improved results.
Technical Paper

Sensor Perception and Motion Planning for an Autonomous Material Handling Vehicle.

The ground mobile robotics study is structured on the two pivotal members namely Sensor perception and Motion planning. Sensor perception or Exteroception comprises the ability of measurement of the layout of environment relative to vehicle’s frame of reference which is a necessity for the implementation of safe navigation towards the goal destination in an unstructured environment. Environment scanning has played a significant role in mobile robots application to investigate the unexplored environment in the sector of defence while transporting and handling material in warehouse and hospitals. Motion Planning is a conjunction of analysing the sensor’s information about the local frame and global map while being able to plan the route from starting point to the target destination. In this paper, a 3600 2-D LiDAR is used to capture the spatial information of the surrounding, the scanning results are presented in a local and global map.
Training / Education

Introduction to Rubber Science and Technology

Rubber – a loosely cross-linked network of polymer chains that when strained to high levels will forcibly return to at or near it original dimensions. This course is designed to provide the participant with a thorough understanding of rubber’s engineering characteristics. This class will introduce the various sources of rubber, both natural and synthetic. The class will contrast the differences between rubber and plastics; including thermoplastic rubber. Detailed discussions on how to select the correct rubber polymer for the application, highlighting the pros and cons of each major rubber type.
Technical Paper

Low cost, fireproof, and light aircraft interior

Low cost, fireproof, and light aircraft interior Fire is a dramatic issue in aircraft nowadays, especially with composite air crafts. An additional issue is the dangerous use of flammable Li-Ion batteries in a lot of appliances. we propose in order to avoid dramas to produce aircraft interiors, fire doors, cargo bay walls, as well than cargo container able to contain a fire inside them, with our ceramic composite called TOUGHCERAM ®. We have developed a low-cost, ceramic, damage tolerant, this ceramic is flexible between minus 100°C and plus 350°C. TOUGHCERAM ® poly-crystalize between 60°C and 110°C and can be reinforced with fibbers like carbon or basalt one. TOUGHCERAM ® survive 90 minutes to a propane 1900°C torches. TOUGHCERAM ® does not burn, nor smoke. In this paper we will explain how it is possible to develop a fully mineral ceramic offering such unique mechanical and fire properties.
Technical Paper

Analytical Model for Calibration Results performances enhancement, resulting in automated prescription for equipments

The current aeronautical manufacturing sector is characterized by the high level of competence and the required requirement in its production processes, based on the objectives of profitability and safety (airworthiness). In recent years, there is a real revolution in the sector, where the most advanced tools for the organization and optimization of production are given priority, supported by the latest massively used techniques of automatic data collection. , their organized storage and their analytical classification. Metrology plays a key role in ensuring the quality and reliability of the information generated in these productive cycles. The provision of an analytical model of flexible measurement systems, capable and easily adaptable to the dynamics of the company, is presented as one of the pillars in which this new conception of production is based.
Technical Paper

A Study on the Optimum Reduction of Required Brake Fluid Level for Improvement of The High Speed Continuous Brake Distance

The high speed continuous braking distance assessment is the worst condition for thermal fades. This study was conducted to investigate the relationship between fade characteristic and friction materials & brake fluid amount for improving braking distance. So, we used the dynamometer to measure the friction coefficient, braking distance and required brake fluid amount. First of all, we studied the influence of friction coefficient on the same friction material shape (chamfer shape, area of the friction material, number of slots). Secondly, we knew the effects of braking distance by the shape of the friction material. Through these two studies, the shape of the friction material favorable to the fade characteristics was obtained. Finally, we measured the amount of required brake fluid in caliper after 10 consecutive braking cycles through Dynamometer. And then, we measured the amount of compression deformation and uneven wear of the friction material.
Technical Paper

Development of a dedicated CNG three-way catalyst model in 1-D simulation platforms

A growing interest in heavy-duty engines powered with CNG dictated by stringent regulations in terms of emissions, has made it essential to study a specific Three-Way Catalyst (TWC). Oxygen storage phenomena characterize catalytic converter efficiency under real world driving operating conditions and, consequently, during strong dynamics in Air-to-Fuel (A/F) ratio. A numerical “quasi-steady” model has been set-up to simulate the chemical process inside the reactor. A dedicated experimental campaign has been performed in order to evaluate the catalyst response to a defined lambda variation pattern of the engine exhaust stream, thus providing the data necessary for the numerical model validation. In fact, goal of the present research activity was to investigate the effect of very fast composition transitions of the engine exhaust typical of the mentioned driving conditions (including fuel cutoffs etc.) on the catalyst performance and on related emissions at the tailpipe.

Laboratory Speed Test Procedure for Passenger Car Tires

This SAE Recommended Practice provides a method for testing the speed performance of passenger car tires under controlled conditions in the laboratory on a test wheel. This procedure applies to "standard load," "extra load," and "T-type high-pressure temporary-use spare" passenger tires.

New and Newly Retreaded Tire Appearance

This document is for establishing and addressing anomalies on appearance of new and newly retreaded tires prior to installation on aircraft. It is intended to use cosmetics as well as functionality to make a determination of acceptability. However, if cosmetic appearance is not a requirement, use the inspection criteria from ARP6225, Aircraft Tire Removal Criteria. This ARP does not supersede (E)TSO-C62 minimum requirements, including marking requirements.