Refine Your Search

Topic

Author

Affiliation

Search Results

Training / Education

Side Impact Occupant Safety and CAE

2019-11-25
Side impact crashes account for approximately twenty-six percent of all motor vehicle fatal crashes, second only to frontal crashes, according to a report by the National Highway Transportation and Safety Administration (NHTSA). While car companies and suppliers continue to develop new technologies that make vehicles safer, NHTSA rolled out updated safety regulations (FMVSS 214) based on new research studies, making vehicle safety design more and more complex. This seminar is designed to familiarize participants with the engineering principles behind vehicle and restraint designs for occupant safety.
Technical Paper

Vision based solution for auto- maneuvering of vehicle for emerging market

2019-11-21
2019-28-2517
Vision based solution for auto- maneuvering of vehicle for emerging market: Author/Co-Author: Singh Ashwani, SDV Ram Kumar, Bose Souvik, Lalwani Chandraprakash General Motors Technical Centre India Key words: Image Processing, Gap finding, virtual/Imaginary lines, Advance Driver Assist System (ADAS), Vehicle to vehicle(V2V)/Vehicle to Infrastructure(V2I/V2X) Research & Engineering Objective: For the various levels of autonomous, the current perception algorithms involve considerable number of sensor inputs like cameras, radars and Lidars and their fusion logics. The planning route for the vehicle navigation is done through map information which is highly volatile and keep changing many at times. Existing steering assist feature during a curve is available by combining additional driver monitoring camera & 360 degree camera. The complexity is very high in the implementation and computation of these algorithm. These solutions are not cost-effective for emerging markets.
Technical Paper

Autonomous Car in India

2019-11-21
2019-28-2522
Automation is expanding in every possible direction and it was only time before it reached the Automobile sector. There has been tremendous traction towards autonomous cars since last 2-3 yrs as a probable solution to reduce accidents and promote safe and comfortable commute. Many companies have expressed their interest in developing some part(s) of it and when would all of this culminate resulting in a fully autonomous car. But as every coin has two aspects so same does automation. This paper covers the future of autonomous cars from Indian perspective, covering possible challenges, complex use cases, advantages, technology enablers, economy outlook etc. India has the dubious honor of ranking first in road deaths in the world at present & accounts for 10 percent of global road accidents with more than 1.46 lakh fatalities annually.
Technical Paper

Semi-autonomous parking assist system (SA-PAS)

2019-11-21
2019-28-2529
This paper describes the Semi-autonomous parking assist system (SA-PAS) developed using combination of high accuracy position sensing and electronic power steering. A real-time system that helps driver to identify the parking space and assist to perform maneuvers. Parking is often a difficult task, especially for inexperienced drivers. Starting with the problem of having to find a suitable parking spot, to then maneuvering in to it without colliding with anything or anyone, while trying avoiding disturbing the surrounding traffic. The numbers of vehicles are rapidly increasing as compared to the expansions of roads and parking spaces. Therefore, effective use of the existing spaces is needed (by making them narrower), which can cause inconvenience to many drivers. Semi-autonomous parking assist system searches for suitable space and steers the vehicle into it, while driver has to control the gear shifter, accelerator and brakes.
Technical Paper

Design of Additive Manufactured Thermoplastic Component as FMVSS 201U Countermeasure

2019-11-21
2019-28-2547
Research and/or Engineering Questing/Objectives: Safety of the occupant in passenger cars is one of the regulatory requirements in many developed countries. This includes upper interior head impact load case of the unbelted occupant during crash (FMVSS 201U) as one of them. During a crash event the occupant head can collide with the interior parts of the vehicle, such as a headliner, pillar trim and other subsequent components in the loading direction. Injury on the head is quantified in terms of the Head Injury Criterion of a crash test dummy (HIC(d)) value which should be less than 1000 per standard. Several ways can be adopted to reduce the HIC(d) value. These include a change in the design of ribs in the safety plastic components, headliner profile change, use of countermeasure foam between headliner and the exterior sheet metal parts, or a combination of any of these to absorb the energy of impact.
Technical Paper

Injury Reduction in Vehicle to Pedestrian Collision using Deployable Pedestrian Protection System in Vehicles

2019-11-21
2019-28-2551
Head injuries are the main source of road fatalities in when a pedestrian is involved in an accident with the vehicle. The frontal part of vehicle such as engine hood, lower-windshield area and A-pillars are the possible location of head impact in such accidents. The head impact with hard points located in these areas result in the fatal head injuries. The effect of impact can be reduced by using the deployable pedestrian protection systems (DPPS) such as hood-lifters and windshield airbag in the vehicle. The study shows how these systems are effective in reducing the fatalities in pedestrian accidents and how to evaluate the performance of these deployable systems.
Technical Paper

Study on effect of HVAC Air Flow Distribution on Windows Fogging

2019-11-21
2019-28-2414
Windshield & Windows fogging up in cars has long been a topic of interest & concern. Lot of research has already been put into Front/Rear windshield fogging up issue and, Defrosters, Heated Windshields have been designed to remove the fog effectively. However, Windows Fogging up is still one of the major concerns faced while driving, as it obscures the drivers' field of vision and raises safety concerns. Windows fogging up is a phenomenon in which Moisture is condensed on the glass of the window. It is classified into two categories - Inside Fogging and Outside Fogging. When Ambient temperature is lower than the cabin temperature, the moisture is condensed on the inside surface of the glass. In this case the moisture is added inside the cabin by the occupants when they exhale air. Similarly when the Cabin temperature is lower than the ambient temperature, the moisture from atmosphere is condensed on the outer surface of the glass.
Technical Paper

Correlation of Objective and Subjective test results for Ride comfort with Heave, Pitch and Roll motion for a Passenger Vehicle

2019-11-21
2019-28-2410
Research Objective The importance of evaluating ride comfort with high degrees of accuracy objectively and its correlation with subjective perception is increasing day by day because of the long duration of the driving experience. The complex motion of the vehicle which is the combination of heave, roll and pitch motion is responsible for causing extreme uneasiness to the driver as well as the passenger. In this paper, ride comfort evaluation is done on the highway with similar traffic conditions with the help of Vibration Dose Value Analysis, Suspension Working Space and Ride Diagram methods for two hatchbacks and its correlation with the complex motion like choppiness of the vehicle is established that will help us to enhance the driver ride experience. Methodology The ride testing is performed for two hatchbacks on a highway road with different kinds of terrain ranging from highly uneven road roughness to moderately smooth surface for a speed range of 60-100 kmph.
Technical Paper

Electrification System Modeling with Machine/Deep Learning for Virtual Drive Quality Prediction

2019-11-21
2019-28-2418
A virtual 'model' is generally a mathematical surrogate of a physical system and when well correlated, serves as a basis for understanding the physical system in part or in entirety. Drive Quality defines a driver's 'experience' of a blend of controlled responses to an applied input. The 'experience' encompasses physical, biological and bio-chemical perception of vehicular motion by the human body. In the automotive domain, many physical modeling tools are used to model the sub-components and its integration at the system level. Physical Modeling requires high domain expertise and is not only time consuming but is also very 'compute-resource' intensive. In the path to achieving 'vDQP (Virtual Drive Quality Prediction)' goal, one of the requirements is to establish 'well-correlated' virtual environments of high fidelity with respect to standard test maneuvers. This helps in advancing many developmental activities from a Controls and Calibration aspect.
Technical Paper

“EFFECT OF DRIVER AIRBAG VENT HOLE SIZES IN THE PERFORMANCE OF THE AIRBAG AND FORCES OCCURRING ON THE DRIVER BODY DUE TO THE AIRBAG DEPLOYMENT IN CASE OF ACCIDENT”

2019-11-21
2019-28-2416
Airbags are very important passive safety component used in vehicle for the safety of the driver during the accident. Airbags are provided with the vent hole for the immediate discharge of the gases which fills the airbag during deployment in case of any accident. Size of the airbag vent hole plays a very important role for the performance of airbag in reducing the driver Injury. Study shows the difference in the performance of the airbags in terms of driver injury and airbag displacement with change in the size of the vent hole for the same airbag.
Technical Paper

A V2V communication protocol to avoid Blind turn accidents and accidents happen

2019-11-21
2019-28-2444
Nowadays the sonar system is used to avoid accidents, which is not effective in case of high-speed at blind turn situation or through side crossing in high ways. That's because vehicle position is not along the line and speed is very high so sonar will not detect danger within avoidable time limits. it seems we need to develop some fast enough system to avoid these type of accidents.
Technical Paper

Proposed Model to Implement a Blockchain for Secure Vehicle to Vehicle Communication

2019-11-21
2019-28-2433
This paper proposes a model to implement a blockchain network that can host a system of autonomous vehicles which communicate through generic V2V protocols like DSRC and CV2X. The blockchain will be designed to function like a global database for V2V communication. The purpose behind the proposal of this model was to ensure a transparent and secure network between all autonomous vehicles which indirectly leads to reduced traffic congestion and takes us a step closer to zero crashes. This is made possible by the blockchain ledger’s enhanced encryption systems.
Technical Paper

In-Vehicle Directional Audio Streaming

2019-11-21
2019-28-2448
In-Vehicle Infotainment has evolved greatly over years from a simple tuner based radio with a small LED display to a complex system with highly intelligent interactive HMI which can mirror the smart phone. The full-fledged entertainment features like watching videos are restricted to only rear passengers. In drive mode, drivers are limited with access to only audio to avoid driver distraction. Rear passengers and drivers are classified into different audio zones. Each of the rear passengers are equipped with headsets so that audio merging with driver zone can be avoided. This leads to passenger discomfort, as many passengers would not prefer to hook up with headset all the time. Now the automotive world is envisioned to reach fully autonomous mode where there is no driver and every passenger is interested to listen to music/video of diverse interest. The audio zones in autonomous car need not be zonified or linear. Circular audio zone can also be a good choice for autonomous cars.
Technical Paper

SMART HONKING

2019-11-21
2019-28-2463
Smart Honking Keywords-Safety, Connectivity, GPS M. Priyanka, Mahindra&Mahindra, India Sai Himaja Nadimpalli, Mahindra&Mahindra,India Keywords-Honking , Infotainment , GPS Research and/or Engineering Questions/Objective: In India unnecessary vehicular honking is the main reason for noise pollution. The problem is worst at traffic signals where drivers start honking without waiting for the signal to turn green or for traffic to move. Drivers show no respect to the law that prohibits the use of horn at traffic signals and other silent zones such as areas near hospitals, schools, religious places and residential areas. Vehicular honking in cities has reached at an alarming level and contributes approximately 70% of the noise pollution in our environment.The unwanted sound can affect human health and behavior, causing annoyance, depression, hypertension, stress, hearing loss, memory loss and panic attacks.
Technical Paper

DEVELOPMENT OF SMART BIKE FOR RIDER’S SAFETY THROUGH HELMET DETECTION

2019-11-21
2019-28-2458
In today’s era, especially in young generation, the craze of motor bikes is really remarkable. As the bikers in our country are increasing, the road mishaps are also increasing day-by-day, due to which many deaths occur and most of them are caused by the negligence in wearing helmet. According to the Ministry of Road Transport and Highways, 1,50,785 people were killed in 4,80,652 road crashes in India in 2016. This translates into 55 crashes and 17 deaths every hour. In case of road crash deaths, Two-Wheeler topped the list with a percentage share of 29.42% followed by Trucks, Tempos, Tractors(25.9%) and Cars, Jeeps, Taxis (21.61%). In order to overcome the above mentioned problem, we are designing an intelligent system that detects the helmet and prevent the rider to ride the bike without wearing helmet which helps to reduce the death cases during an accident. Our task as an automobile engineer was to design a smart helmet that could automatically detected by the two-wheeler.
Technical Paper

HANDLING EXCEPTIONAL SITUATION OF AN AUTONOMOUS VEHICLE

2019-11-21
2019-28-2526
In autonomous vehicle world human safety takes highest priority. And most researchers agree that machines won't be able to completely take over driving duties for years or even decades. "Today's autonomous vehicles can drive relatively well in typical settings, but they fail in exceptional situations - and it's those situations that are the most dangerous," said Walter Lasecki, an assistant professor of computer science and engineering. "Designing autonomous systems that can handle those exceptional situations could take decades, and in the meantime, we're going to need something to fill the gap. Few companies have introduced human safety drivers in autonomous vehicles which has cost advantage compared to traditional ride sharing services. Combining human and artificial intelligence in autonomous vehicles could push driverless cars more quickly toward wide - scale adoption.
Technical Paper

MASS OPTIMIZED HOOD DESIGN FOR CONFLICTING PERFORMANCES

2019-11-21
2019-28-2546
MASS OPTIMIZED HOOD DESIGN FOR CONFLICTING PERFORMANCES Santosh Swamy, Gulshan Noorsumar, Shivakumar Chidanandappa General Motors Technical Center, India Keywords Hood; Head Injury Criterion (HIC); Stiffness; Shape optimization; Multi-Disciplinary Optimization (MDO) Research and/or Engineering Questions/ Objective The objective of this work is to obtain a light weight hood which has least possible mass, and at the same time meets all contradicting performances of pedpro (pedestrian protection) and structural stiffness disciplines. Passenger vehicles have stringent safety norms from pedpro perspective to meet child and adult head injury criteria (HIC). These pedestrian safety requirements often conflict with structural stiffness performance criteria which pose a challenge for most automotive OEMs. Therefore, there is a growing need for mass optimization and performance balancing to meet both the requirements simultaneously.
Technical Paper

Analysis of occupant dynamics and optimization of Driver airbag performance against all FMVSS208 frontal impact cases using validated Finite element Methodology

2019-11-21
2019-28-2545
Several people die every year due to vehicle accidents. Federal Motor Vehicle Safety Standards (FMVSS) are U.S. federal regulations stating design, structure, performance, and durability necessities for vehicles. The objective of a crash test for FMVSS No. 208 is to measure how well a passenger vehicle would protect its occupants in the event of a frontal crash. FMVSS 208 consists of series of tests including different impact surface type as well as occupant sizes. It also covers the belted and unbelted occupant behavior at the time of front impact. Each test scenario has different ways to injure the occupant. Airbags are the part of passive safety equipment family in any automobile and play an imperative role to reduce the occupant head and chest injuries at the time of crash or accidents. This study covers the evaluation of airbag performance in all FMVSS 208 load cases using validated Finite Element Methodology (FEM).
X