Search Results

Standard

Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 6061B/SiC/40p (3 μm) (T1P)

2023-03-08

CURRENT

AMS4368A

This specification covers discontinuously reinforced aluminum alloy (DRA) metal matrix composites (MMC) made by mechanical alloying of 6061B aluminum powder and SiC particulate, which is then consolidated by Hot Isostatic Pressing (HIP) into shapes between 12 to 100 square inches (0.008 to 0.065 m2), inclusive, cross-section. Tensile property response to heat treatment has been demonstrated on samples of 1 square inch (645 mm2) maximum cross section (see 8.9).

Standard

Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 2124A/SiC/25p (3µm) (T1P)

2021-07-20

WIP

AMS4355A

This specification covers discontinuously reinforced aluminum alloy (DRA) metal matrix composites (MMC) made by mechanical alloying of the 2124A powder and SiC particulate, which is then consolidated by Hot Isostatic Pressing (HIP) into shapes less than 62 in2 (0.04 m2) cross-section (see 8.11).

Standard

Bearings, Sintered Metal Powder 89Cu – 10Sn Oil Impregnated

2018-08-23

CURRENT

AMS4805F

This specification covers one type of sintered metal powder in the form of oil-impregnated bearings.

Standard

Copper Powder 99.0 Cu, Minimum As Fabricated

2017-11-14

HISTORICAL

AMS4740D

This specification covers elemental copper in the form of powder.

Standard

Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 6061B/SiC/40p (3μm) (T1P)

2017-07-14

HISTORICAL

AMS4368

This specification covers discontinuously reinforced aluminum alloy (DRA) metal matrix composites (MMC) made by mechanical alloying of 6061B aluminum powder and SiC particulate, which is then consolidated by Hot Isostatic Pressing (HIP) into shapes between 12 to 100 in2 (0.008 to 0.065 m2) cross-section inclusive. Tensile property response to heat treatment has been demonstrated on samples of 1 in2 (645 mm2) maximum cross section (see 8.9).

Standard

Aluminum Alloy, Sheet 6.5Fe - 1.3Si - 0.60V (8022-H112) Powder Metallurgy Product, Strain Hardened

2017-05-25

CURRENT

AMS4266B

This specification covers an aluminum alloy powder metallurgy product in the form of sheet 0.010 to 0.250 inch (0.25 to 6.35 mm) in nominal thickness.

Standard

Aluminum Alloy Extrusions 8.6Fe - 1.8Se - 1.3V (8009-H112) Powder Metallurgy Product, Strain-Hardened

2017-04-04

CURRENT

AMS4309B

This specification covers an aluminum alloy powder metallurgy product in the form of round extrusions up to 3.5 inches (89 mm) in diameter and rectangular and other solid extrusions up to 10 square inches (64.5 cm2) in cross-sectional area. The maximum extrusion length is 100 inches (2.5 m).

Standard

Aluminum Alloy, Sheet 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain Hardened

2017-04-04

CURRENT

AMS4308B

This specification covers an aluminum alloy powder metallurgy product in the form of sheet 0.010 to 0.250 inch (0.25 to 6.35 mm) in nominal thickness.

Standard

Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 2124A/SiC/25p (3μm) (T1P)

2015-12-02

CURRENT

AMS4355

This specification covers discontinuously reinforced aluminum alloy (DRA) metal matrix composites (MMC) made by mechanical alloying of the 2124A powder and SiC particulate, which is then consolidated by Hot Isostatic Pressing (HIP) into shapes less than 62 in2 (0.04 m2) cross-section (see 8.11).

Standard

Aluminum Alloy, Sheet 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain Hardened

2013-12-04

HISTORICAL

AMS4308A

This specification covers an aluminum alloy powder metallurgy product in the form of sheet 0.010 to 0.250 inch (0.25 to 6.35 mm) in nominal thickness.

Standard

Aluminum Alloy Extrusions 8.6Fe - 1.8Se - 1.3V (8009-H112) Powder Metallurgy Product, Strain-Hardened

2013-12-04

HISTORICAL

AMS4309A

This specification covers an aluminum alloy powder metallurgy product in the form of round extrusions up to 3.5 inches (89 mm) in diameter and rectangular and other solid extrusions up to 10 square inches (64.5 cm2) in cross-sectional area. The maximum extrusion length is 100 inches (2.5 m).

Standard

Aluminum Alloy, Sheet 6.5Fe - 1.3Si - 0.60V (8022-H112) Powder Metallurgy Product, Strain Hardened

2011-11-03

HISTORICAL

AMS4266A

This specification covers an aluminum alloy powder metallurgy product in the form of sheet 0.010 to 0.250 inch (0.25 to 6.35 mm) in nominal thickness.

Standard

COPPER POWDER 99.0 Cu, minimum As Fabricated

1995-05-01

HISTORICAL

AMS4740B

This specification covers elemental copper in the form of powder.

Standard

ALUMINUM ALLOY, SHEET 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain Hardened

1994-04-01

HISTORICAL

AMS4308

This specification covers an aluminum alloy powder metallurgy product in the form of sheet 0.010 to 0.250 inch (0.25 to 6.35 mm) in nominal thickness.

Standard

ALUMINUM ALLOY EXTRUSIONS 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain-Hardened

1994-04-01

HISTORICAL

AMS4309

This specification covers an aluminum alloy powder metallurgy product in the form of round extrusions up to 3.5 inches (89 mm) in diameter and rectangular and other solid extrusions up to 10 square inches (64.5 cm2) in cross-sectional area. The maximum extrusion length is 100 inches (2.5 m).

Standard

ALUMINUM ALLOY, SHEET 6.5Fe - 1.3Si - 0.60V (8022-H112) Powder Metallurgy Product, Strain Hardened

1994-03-01

HISTORICAL

AMS4266

This specification covers an aluminum alloy powder metallurgy product in the form of sheet 0.010 to 0.250 inch (0.25 to 6.35 mm) in nominal thickness.

Standard

BEARINGS, SINTERED, METAL POWDER 89Cu - 10Sn Oil Impregnated.

1949-11-01

HISTORICAL

AMS4805A