Refine Your Search

Topic

Author

Affiliation

Search Results

Technical Paper

Snowmobii 2.0 (Snow mobility Unmanned Vehicle)

2019-11-21
2019-28-2516
In this paper we propose the snow mobility vehicle in order increase the mobility and decrease the risk of accidents for carry food and medicines on snow bounded areas using unmanned tracked vehicle called as snowmobii 2.0. Our unmanned tracked vehicle can transport Food/medicines as well as Defence in snow bounded areas. This unmanned robot can run in loose as well as hard snow due to it have specific featured technology in base wheel(track wheel system) such as hub with outer seals that improve its durability. The proposed snow mobility vehicle is consist of many sophisticated-designed systems such as navigation system, obstacle detection system, communication system, temperature sensing system. Snowmobii 2.0 is easy to get command and enable significant reduction in losses of many solder’s precious lives due to unavailability of food and medicines at that place.
Technical Paper

NEXT GENERATION POWER DISTRIBUTION UNIT IN WIRING HARNESS

2019-11-21
2019-28-2571
Keywords – Miniaturization, Low Profile (LP) Relays, Low Profile (LP) Fuses, Fuse box, Wiring Harness Research and/or Engineering Questions/Objective With the exponential advancement in technological features of automobile’s EE architecture, designing of power distribution unit becomes complex and challenging. Due to the increase in the number of features, the overall weight of power distribution unit increases and thereby affecting the overall system cost and fuel economy. The scope of this document is to scale down the weight and space of the power distribution unit without compromising with the current performance. Methodology Miniaturization involves replacing the mini fuses and J-case fuses with LP mini and LP J-case fuses respectively. The transition doesn’t involve any tooling modification and hence saves the tooling cost.
Technical Paper

LIFE CYCLE ASSESSMENT OF A PASSENGER VEHICLE TO ANALYSE THE ENVIRONMENTAL IMPACTS USING CRADLE TO GRAVE APPROACH

2019-11-21
2019-28-2581
OBJECTIVE: Climate change is primary driver in the current discussions on CO2 reduction in the automotive industry. Current Type approval emissions tests (BS III, BS IV) covers only tailpipe emissions, however the emissions produced in upstream and downstream processes (e.g. Raw material sourcing, manufacturing, transportation, vehicle usage, recycle phases) are not considered in the evaluation. The objective of this project is to assess the environmental impact of the product considering all stages of the life cycle, understand the real opportunities to reduce environmental impact across the product life cycle. METHODOLOGY: As a part of environmental sustainability journey in business value chain, Life-cycle assessment (LCA) technique helps to understand the environmental impact categories. To measure overall impact, a cradle to grave approach helps to assess entire life cycle impact throughout various stages.
Technical Paper

Electric Vehicle Thermal Management System For Hot Climate Regions

2019-11-21
2019-28-2507
ELECTRIC VEHICLE THERMAL MANAGEMENT SYSTEM FOR HOT CLIMATE REGIONS Rana Tarun*, Yamamoto Yuji, Kumar Ritesh, Bhagatkar Shubhada Pranav Vikas India Private Limited, India Key Words Electric Vehicles (EV); Battery Thermal Management System (BTMS); COP; Electric Vehicle Thermal Management System (EVTMS); BTMS and HVAC System Integration; Thermal System Performance Comparison; Active Liquid Cooling; EV Battery Cooling Research and/or Engineering Questions/Objective Electric Vehicles is the need of time to limit global warming and it is in application at a wide scale in colder or mild climate regions where ambient temperature is limited to mild or moderate level. Its application (Heat pump, CO2) is constrained to cold climates only due to securing better COP for heating function, sacrificing cooling COP of the existing system when operated in Hot Climate Regions, thus limiting its application to nearly half of the automotive user-base.
Technical Paper

Thermal Challenges in Automotive Exhaust System through Heat Shield Insulation

2019-11-21
2019-28-2539
While advanced automotive system assemblies contribute greater value to automotive safety, reliability, emission/noise performance and comfort, they are also generating higher temperatures that can reduce the functionality and reliability of thesystem over time. Thermal management and insulation are extremely important and highly demanding in BSVI, RDE and Non-IC engine operating vehicles. Passenger vehicle and Commercial vehicle exhaust systems are facing multiple challenges such as packaging constraints, weight reduction andthermalmanagement requirements.Frugal engineering is mandatory to develop heat shield in the exhaust system with minimum heat loss. The focus of the paper is to design, develop and validate heat shield products with different variables such as design gap, insulation material, sheet metal thickness and manufacturing processes. 1D and 3D computational simulations are performed with different gaps from 3 mm to 14 mm are considered.
Technical Paper

Vehicle Interior cleanliness tracker

2019-11-21
2019-28-2466
The future of mobility is being driven towards fully autonomous driving. As a result, people spend majority of the time in vehicles for chores other than driving. The focus of automotive makers shifts towards providing best-in-class passenger comfort. One of the least focused area in passenger comfort is vehicle interior cleanliness which requires periodic human intervention. An intelligent vehicle can outsmart a human by self-caring to maintain the cleanliness elements on floor, seat and roof. This paper addresses subjects like wetness, dirt and stains in the vehicle interior utilizing the capability of Interior sensing platform. An internally mounted camera in the vehicle can capture images of the interior and apply image processing techniques to identify the subjects mentioned above. The wetness on the floor mats can lead to moldy odor, corrosion, failure of the electronic components in the car.
Technical Paper

Development of low cost life saving system for Automotive vehicles during Road Accidents.

2019-11-21
2019-28-2460
According to research study 45% of death cause due to not getting help on time to the injured person. Research has proven that if injured person is not found any option of help then they also loose the power to fight such critical situation due to psychological effect. When vehicle met accident, people are not getting on time support, this delay is the major cause of death in developing nations. Presently there is no any robust system available in market for passenger & commercial vehicles which helps to provide on time help to the injured persons & saves human life. In current situation low cost life saving device is need of our society. This paper deals with the design & development of the low cost-life saving device. This paper also comprises the scenario when any vehicle meet an accidents within certain speed limit then how the intelligent life saving device will work & save the life's.
Technical Paper

Sensor Perception and Motion Planning for an Autonomous Material Handling Vehicle.

2019-10-28
2019-01-2611
The ground mobile robotics study is structured on the two pivotal members namely Sensor perception and Motion planning. Sensor perception or Exteroception comprises the ability of measurement of the layout of environment relative to vehicle’s frame of reference which is a necessity for the implementation of safe navigation towards the goal destination in an unstructured environment. Environment scanning has played a significant role in mobile robots application to investigate the unexplored environment in the sector of defence while transporting and handling material in warehouse and hospitals. Motion Planning is a conjunction of analysing the sensor’s information about the local frame and global map while being able to plan the route from starting point to the target destination. In this paper, a 3600 2-D LiDAR is used to capture the spatial information of the surrounding, the scanning results are presented in a local and global map.
Technical Paper

Analytical Model for Calibration Results Performances Enhancement, Resulting in Automated Prescription for Equipments

2019-09-16
2019-01-1878
The current aeronautical manufacturing sector is characterized by the high level of competence and the required requirement in its production processes, based on the objectives of profitability and safety (airworthiness). In recent years, there is a real revolution in the sector, where the most advanced tools for the organization and optimization of production are given priority, supported by the latest massively used techniques of automatic data collection. , their organized storage and their analytical classification. Metrology plays a key role in ensuring the quality and reliability of the information generated in these productive cycles. The provision of an analytical model of flexible measurement systems, capable and easily adaptable to the dynamics of the company, is presented as one of the pillars in which this new conception of production is based.
Technical Paper

Low Cost, Fireproof, and Light Aircraft Interior

2019-09-16
2019-01-1857
Low cost, fireproof, and light aircraft interior Fire is a dramatic issue in aircraft nowadays, especially with composite air crafts. An additional issue is the dangerous use of flammable Li-Ion batteries in a lot of appliances. we propose in order to avoid dramas to produce aircraft interiors, fire doors, cargo bay walls, as well than cargo container able to contain a fire inside them, with our ceramic composite called TOUGHCERAM ®. We have developed a low-cost, ceramic, damage tolerant, this ceramic is flexible between minus 100°C and plus 350°C. TOUGHCERAM ® poly-crystalize between 60°C and 110°C and can be reinforced with fibbers like carbon or basalt one. TOUGHCERAM ® survive 90 minutes to a propane 1900°C torches. TOUGHCERAM ® does not burn, nor smoke. In this paper we will explain how it is possible to develop a fully mineral ceramic offering such unique mechanical and fire properties.
Technical Paper

Analysis of a Coupling System of Aircraft Environmental Control and Fuel Tank Inerting Based on Membrane Separation

2019-09-16
2019-01-1895
This paper raises a coupling system of aircraft environmental control and fuel tank inerting based on membrane separation. The system applies a membrane dehumidifier to replace water vapor removal unit of heat regenerator, condenser and water separator, which is widely used in conventional aircraft environmental control system nowadays. Water vapor can travel across the membrane wall under its pressure difference without phase change, so the dehumidification process consumes no cooling capacity and the cooling capacity of the system increases. This paper first compares the thermodynamic properties of environmental control system based on membrane dehumidification and the environmental control system based on condensation. The results show that the membrane dehumidification system has bigger cooling capacity and lighter weight.
Technical Paper

Development of Regenerative Brake Control Strategy to Remove Brake Rust

2019-09-15
2019-01-2125
When the vehicle is parked overnight or for long periods of time, rust occurs on the friction surface of the brake disc and the brake pad will retain humidity, which will destabilize the friction coefficient for the brake parts, causing a various noises and nonlinear brake feeling. In the case of gasoline or diesel vehicles, brake disc rust and pad humidity conditions are usually eliminated by several friction(hydraulic) brakes, but in the case of environmental vehicles, such as EV, FCEV, HEV, due to the regenerative braking system, it is not easy to escape these conditions. Moreover, in the case of environmental vehicles, several friction(hydraulic) brakes to escape these conditions, affect fuel efficiency. Therefore, applying logic to remove brake rust and humidity conditions requires a strategy for cooperative control of regenerative braking considering fuel efficiency performance.
Technical Paper

A Study on the Optimum Reduction of Required Brake Fluid Level for Improvement of The High Speed Continuous Brake Distance

2019-09-15
2019-01-2121
The high speed continuous braking distance assessment is the worst condition for thermal fades. This study was conducted to investigate the relationship between fade characteristic and friction materials & brake fluid amount for improving braking distance. So, we used the dynamometer to measure the friction coefficient, braking distance and required brake fluid amount. First of all, we studied the influence of friction coefficient on the same friction material shape (chamfer shape, area of the friction material, number of slots). Secondly, we knew the effects of braking distance by the shape of the friction material. Through these two studies, the shape of the friction material favorable to the fade characteristics was obtained. Finally, we measured the amount of required brake fluid in caliper after 10 consecutive braking cycles through Dynamometer. And then, we measured the amount of compression deformation and uneven wear of the friction material.
Technical Paper

Assessment of energy consumption and range in electric vehicles with high efficiency HVAC systems based on the Tesla expander

2019-09-15
2019-24-0244
Battery electric vehicles (BEVs) are considered one of the most promising solution to improve the sustainability of the transportation sector aiming at a progressive reduction of the dependence on fossil fuels and the associated local pollutants and CO2 emissions. Presently, the major technological obstacle to a large scale diffusion of BEVs, is the fairly low range, typically less than 300 km, as compared to classical gasoline and diesel engines. This limit becomes even more critical if the electric vehicle is operated in severe weather conditions, due to the additional energy consumption required by the cabin heating, ventilating, and air-conditioning (HVAC). Presently, the adoption of vapor-compression cycle, either in heat pump or refrigerator configuration, represents the state-of-the-art technology for HVAC systems in vehicles. Such devices typically employ an expansion valve to abruptly reduce the pressure causing the flash evaporation of the working fluid.
Technical Paper

Estimation of fuel consumption and CO2 emissions of car travel in transportation planning: the Lazio region case study

2019-09-15
2019-24-0252
The reduction of oil dependence and CO2 emissions have been included in the set of policy objectives by the European Union, according to the latest White Paper on transportation. Car travel is heavily dependent on oil, with minor exceptions represented by CNG (compressed natural gas) and all-electric vehicles. There is a tight relationship between CO2 emissions, almost unanimously recognized as main determinant of climate change, and fuel consumption. The paper provides a comparative analysis of two methods that can be used in transportation planning for the estimation of fuel consumption and CO2 emissions of car travel. The first method uses consumption and emission factors per vehicle-km travelled that are based on average network speed. The second method uses consumption and emission factors that are specific of the individual links of the network.
Technical Paper

Development of a Dedicated CNG Three-Way Catalyst Model in 1-D Simulation Platforms

2019-09-09
2019-24-0074
A growing interest in heavy-duty engines powered with CNG dictated by stringent regulations in terms of emissions, has made it essential to study a specific Three-Way Catalyst (TWC). Oxygen storage phenomena characterize catalytic converter efficiency under real world driving operating conditions and, consequently, during strong dynamics in Air-to-Fuel (A/F) ratio. A numerical “quasi-steady” model has been set-up to simulate the chemical process inside the reactor. A dedicated experimental campaign has been performed in order to evaluate the catalyst response to a defined lambda variation pattern of the engine exhaust stream, thus providing the data necessary for the numerical model validation. In fact, goal of the present research activity was to investigate the effect of very fast composition transitions of the engine exhaust typical of the mentioned driving conditions (including fuel cutoffs etc.) on the catalyst performance and on related emissions at the tailpipe.
Standard

Failure Rate Estimating

2019-07-15
WIP
SSB1_004B
This document is an annex to EIA Engineering Bulletin SSB-1, Guidelines for Using Plastic Encapsulated Microcircuits and Semiconductors in Military, Aerospace and Other Rugged Applications (the latest revision). Failure-Mechanism-Driven Reliability Monitoring draws upon the concepts and implementation of line controls, process stability, and effective monitoring programs in lieu of qualifying a product based solely on a fixed list of tests. A supplier must identify those failure mechanisms that may be actuated through a given product / process change(s), and must design and implement reliability tests adequate to assess the impact of those failure mechanisms on system level reliability. In order for this to be effective, the supplier establishes a thorough understanding of and linkage to their reliability monitoring program.
Standard

Converting ATIS Message Standards From ASN.1 to XML

2019-07-12
CURRENT
J2630_201907
This SAE Standard presents a set of rules for transforming an Abstract Syntax Notation (ASN.1) message set definition into an eXtensible Markup Language (XML) schema. The result is intended to be a stand-alone XML Schema that is fully consistent with an existing ASN.1 information model. This is a different goal from other related work by other standards bodies developing a set of XML encoding rules for ASN.1 or ASN.1 encodings for XML Schema. These rules were initially developed in order to produce an XML schema for the SAE ATIS standard. While other standards may also choose to use these rules, the rules may not be applicable for all environments. The goal for these transformation rules is twofold. The first goal is to provide a uniform set of such rules that all interested parties can use. The second goal is to use such rules to define an adopted schema for traveler information that reflects the preferred translation of ASN.1 message sets to XML for use by ITS system implementers.
Standard

Air Filter Element Test Method

2019-07-03
CURRENT
J1533_201907
This SAE test method establishes a uniform test procedure for determining the gravimetric (mass based) efficiency and pressure drop performance levels of operator enclosure panel type filters on off-road, self-propelled work machines used in earth moving, and forestry, as defined in SAE J1116 and for agricultural equipment as defined in ANSI/ASAE S390, and equipped with an operator enclosure with a powered fresh air system. ISO/TS 11155-1 may additionally be used, which describes the use of particle sizing devices to measure the fractional (particle size) efficiency of panel type filters for automotive cabin filter applications. Automotive cabin filters are similar to filters described in this procedure, and the ISO/TS 11155-1 test method is therefore directly applicable.
X