Refine Your Search

Topic

Author

Affiliation

Search Results

Technical Paper

High rigidity and light weight bumper material development in India

2019-11-21
2019-28-2553
Vehicle weight reduction becomes important at the view point of fuel efficiency improvement and CO2 reduction in India also as well as developed countries. With this background, High tensile and Super high tensile steel application has become increasing. Similary, weight reduction of big plastic parts like bumper face is one of the most important items, so Honda has developed Thin-wall and light weight bumper face. In the development of light weight bumper, rigidity, impact strength and flowability which are main requirement are cotradictory property. It is necessary to develop new material to achieve this technical concern. Moreover, we verified part shape and thickness optimization to achieve part requirement. Established high property material and part manufacturing technology were applied for current CITY firstly, and it has been expanded to other models sequentially to contribute weight reduction for Honda vehicles.
Technical Paper

C123 Methodology for concept design of the Chassis Frame

2019-11-21
2019-28-2534
Objective This paper explores the usage of Altair simulation driven concept process, C123 for developing the chassis frame of the SUV along with Multidisciplinary optimisation tool. C123 process is useful for strategic & systematic usage of optimisation to generate design alternatives, trade-off information, best balanced designs, design sensitivities, to actively support the concept development process on daily basis. Methodology C123 is used for developing initial concept design of the chassis frame of the SUV. C123 process is independent of vehicle architectures, manufacture process (e.g. extrusions, sheet metal) & material selection (e.g. metals, composites, mixed etc.) and platform sharing strategy. C1 process is used for identification of optimum Structural Layout, C2 is for rapid optimum Sizing of idealized Sections, C3 is used for detailed optimum Sizing of Manufacturable Sections. Automatic process is used for handling pre and post processing process very efficiently.
Technical Paper

High Durable PU Metallic Monocoat system for tractor sheet metal application.

2019-11-21
2019-28-2541
In sheet metal painting for various applications like Tractor, Automobile, most attractive coating is metallic paints and it is widely applied using 3 coats 2 bake or 3 coat 1 bake technology. Both options, results in high energy consumption, higher production throughput time & lower productivity in manufacturing process. During various brainstorming & sustainable initiatives, paint application process was identified for alternative thinking to reduce burden on environment & save energy. Various other industry benchmarking & field performance requirement studies helped us identify the critical to quality parameters. We worked jointly with supplier to develop mono-coat system without compromising the performance & aesthetical properties. This results in achieving better productivity, elimination of two paint layers, substantial reduction in volatile organic content, elimination of one baking cycle and energy saving.
Technical Paper

Characterization and Durability of Mold-In-Color Engineering Plastics

2019-11-21
2019-28-2542
Plastics are prone to photo oxidative and thermal oxidative degradation under usage conditions due to their chemical nature. From sustainability and cost standpoint, there is an increasing focus on Mold-In-Color (MIC) plastic materials. Simultaneously customer’s expectations on the perceived quality of these MIC parts has been increasing with attractive color and glossy appearance. A study was conducted to analyze the product quality and durability aspects over a prolonged exposure to accelerated weathering condition. Material selected for this study were injection molded specimens of ABS and PC/ABS used in automotive passenger vehicles.
Technical Paper

STATISTICAL ANALYSIS OF LOW CYCLE FATIGUE PROPERTIES IN METALS FOR ROBUST DESIGN

2019-11-21
2019-28-2576
Objective: In ground vehicle industry, strain life approach is commonly used for predicting fatigue life. This approach requires use of fatigue material properties such as fatigue strength coefficient (σf'), fatigue strength exponent (b), fatigue ductility coefficient (εf'), fatigue ductility exponent (c), cyclic strength coefficient (K′) and cyclic strain hardening exponent (n′). These properties are obtained from stable hysteresis loop of constant amplitude strain-controlled uniaxial fatigue tests. Usually fatigue material properties represent 50th percentile experimental data and doesn't account possible material variation in the fatigue life calculation. However, for robust design of vehicle components, variation in material properties need to be taken into account. In this paper, methodology to develop 5th percentile (B5), 10th percentile (B10) and 20th percentile (B20) fatigue material properties are discussed.
Technical Paper

INTRODUCTION OF GREEN LED LIGHT FOR SAFETY, POLLUTION CONTROL, FUEL SAVING AND MOTION INDICATOR IN AUTOMOBILES.

2019-11-21
2019-28-2455
Research and/or Engineering Questions/Objective - This invention relates to introduction of GREEN LED LIGHT for safety, fuel saving, pollution control and motion indicator in automobiles. At present, every vehicle is provided with red light, orange light and white light at the rear end of the vehicle. Now, there is no such light which can tell about the motion of the vehicle, whether the vehicle's engine is using its power to move or going on in rolling condition. According to the present invention a GREEN LED LIGHT is introduced at the rear end f the vehicle. The green led light is on when the vehicle is using its engine's power to move. At present, when we drive behind the vehicle we continuously make assumption about the motion of the vehicle in front of us. This GREEN LED LIGHT will give exact information about the motion of the vehicle.
Technical Paper

Optimization of the critical parameters affecting the fuel lid performance

2019-11-21
2019-28-2413
Fuel lid is one of the parts which are mostly operated mechanically by the end user while filling the fuel. Therefore part design should be done in such a manner that it can be operated smoothly without any hassles. The conventional steel fuel filler doors are of two types: Three-piece type fuel filler doors also known as the dog-leg type and two-piece type fuel filler doors also known as the butterfly type. Both types of fuel filler doors have a pin that acts as a rotational hinge axis about which the fuel filler door opens and closes. Depending on the styling and shape of the side body outer, fuel lid type is decided. In the current study, dog-leg type fuel lid is considered. The factors that primarily affect the opening-closing performance are the weight of fuel lid, hinge axis, and the friction at the hinge area. The orientation of the hinge axis is derived from the profile of the side body outer panel. The fuel lid weight and hinge axis are decided in the initial design stage.
Technical Paper

FABRICATION AND WEAR CHARACTERISTICS BASALT FIBER REINFORCED POLYPROPYLENE MATRIX COMPOSITES

2019-11-21
2019-28-2570
Generally brake pads are manufacturing by use of asbestos materials, these materials are chemically harmful and toxic, affects human health. The present investigation fabricates polypropylene composites with mixing constant volume [5 Vol.%] of alumina nano particles and different volume percentages [0%, 5%, 10% & 15%] of basalt fibre by hand layup compression technique. The wear characteristics of polypropylene matrix composites were tested by dry sliding condition using pin on disc apparatus configuration with hardened steel counter-face at elevated temperature. The load was applied 30N to 70N with the interval of 20N and varying of sliding speed 300 rpm to 900rpm with the interval of 300rpm for the time period of 0-180 sec. The wear rate was decreases with addition of alumina nano particle and also increases the frictional force for the effect of basalt fibre content present in the composites. The co-efficient of friction was increases from 0.1 to 0.66 under normal loading condition.
Technical Paper

An alternate cost effective material for rocker arm used in heavy commercial vehicles

2019-11-21
2019-28-2550
Rocker arm in internal combustion engine is very important part which transfer the cam motion and force to the valve. In heavy commercial vehicles, the engine components are design for an infinite life (considerable higher than other components). Recently industries are working for light weight and optimized cost material. Hence it is required to have an optimized cost effective design of rocker arm without affecting its performance. A rocker arm should meet the stiffness and strength requirement. The objective of this study is to find out the alternate material for rocker arm which can provide the similar strength & stiffness as conventional rocker arm material. To achieve the performance and cost target, alternate material cast iron has been evaluated for rocker arm. Cast iron is lighter than the forged steel rocker arm, also it has a good frictional characteristic. Further bush is eliminated from the rocker arm assembly due to self-lubricant property of the cast iron rocker arm.
Technical Paper

Banana Stem Based Activated Carbon as Filler in Polymer Composites for Automobile Applications

2019-10-11
2019-28-0093
Activated carbon was produced from a new part of banana plant namely true stem in this current research and used as fillers in polymer composites for automobile application. True stems of banana plants are the main wastes in banana or fruit markets which refer to the remains after banana fruits are removed from the supporting stems. Conversion of raw material into activated carbon particles is done by chemical and heat activation. The raw material used here were dried samples of banana plant’s true stem. This material was heated in a crucible at 400°C and then powdered. These crushed samples were activated using hydro-chloric acid at 120°C for 5 hours and finally in a furnace for thermal activation at 700°C for 1 hour. These particles were incorporated as fillers in composites at proportions of 10%, 15%, 20% and 25%. The activated carbon samples were characterized by determining its fixed carbon content and bulk density.
Technical Paper

Characterization of Areca and Tamarind fiber reinforced hybrid polymer composites for structural applications

2019-10-11
2019-28-0168
In recent years, natural fibers reinforced composites are used in various engineering arenas owing to its specific rewards like biodegradable, low cost, readily available, easy processing, less toxic and eco-friendly physiognomies. However, the commonly used E-glass fiber polymer composite was just inverse to the properties of the reported natural fibers. Therefore, in the present work discarded areca and tamarind fibers was collected, extracted, fabricated and evaluated for its overall performance and to implement it as an alternative for synthetic fiber composites. Composite specimens are fabricated with different proportions of fiber/matrix and investigated for their potentiality by exploring its mechanical, physical, chemical, water absorption and thermal properties as per standard test procedures. Moreover, the obtained areca and tamarind hybrid composite results are better than their individual based composites and in par with the existing synthetic fiber products.
Technical Paper

Machinability and parametric optimization of Inconel 600 using Taguchi-Desirability analysis under dry environment

2019-10-11
2019-28-0068
Inconel 600 is a face-centered cubic structure and nickel-chromium alloy. Alloy 600 has good resistance to oxidation, corrosion resistant, excellent mechanical properties and good creep rupture strength at higher temperature. Alloy 600 is used in chemical and food processing, heat treating, phenol condensers, soap manufacture, vegetable, and fatty acid vessels. In this context, the present paper investigates the machinability characteristics of Alloy 600 under dry environment. Also, the parametric effect of cutting speed, feed rate and cutting depth on the force, surface roughness and tool wear are carried out using 3-Dimensional surface and 1-Dimensional plots. The optimal parameters are determined systematically based on Taguchi-desirability analysis with turned with TiAlN coated carbide insert. From the graphical analysis of collected data, the low rate of feed and moderate cutting for roughness and cutting force and average feed rate for tool wear with low cutting depth.
Technical Paper

Turning of Inconel 825 with coated carbide tool applying vegetable-based cutting fluid mixed with CUO, Al2O3 and CNT Nanoparticles by MQL

2019-10-11
2019-28-0060
Inconel 825 is nickel (Ni)-iron (Fe)-chromium (Cr) alloy with additions of copper (Cu), molybdenum (Mo), and titanium (Ti). The alloy has excellent resistance to corrosion and is often the most cost-effective alloy in sulphuric acid piping vessels and chemical process equipment. No attempt of applying MQL with the addition of nanoparticles was reported conferring to the works accessed. The present study is focused on evaluating the effect of the addition of nanoparticles (CUO, Al2O3 and CNT) in vegetable oil applied by MQL mode during turning of Inconel 825 with coated carbide tool. Cutting force, surface roughness and tool wear are evaluated. The results showed that the addition of nCNT substantially improved the machining performance, smaller flank and crater wear on the tool edge, while the adhesion and abrasion are observed as wear mechanism and better results are obtained at 0.5% of nCNT+ vegetable oil to produce the lowest values.
Technical Paper

Study of Mechanical Properties of Similar and Dissimilar Metals of Monel 400 and SS 321by using Gas Tungsten Arc Welding (GTAW) Process

2019-10-11
2019-28-0141
In the present study the fabrication of joints between the nickel base alloys and steels of various grades have been under taken, joining of these metals has assumed new importance by virtue of their widespread in nuclear and aerospace applications. Such joints provide excellent strength, oxidation and corrosion resistance. This paper deals with the study of weldability, and mechanical properties of weld joints of two different alloys such as nickel based alloy- monel 400 and austenitic stainless steel AISI 321. The joining of the similar and dissimilar metals is carried out by GTAW process by employing two different types of filler rods such as SS321 and ERNiCrMo-3.
Technical Paper

Design and Analysis of Aluminium-Flyash Composite for Connecting Rod

2019-10-11
2019-28-0166
In this modern era of rapid growth of technology and need of economical machining processes and materials, there is an increasing demand for new materials for different mechanical applications. Composites with fly ash as reinforcement are likely to overcome the cost barrier for wide spread applications in automotive and small engine applications. To improve wettability, elements such as Mg and Si are added into Al melt to incorporate the ceramic particles. The chemical composition and engineering properties of fly ash, its physical and chemical properties make it an ideal raw material for producing various application based composites. The main objective this paper is to fabricate an aluminium- fly ash composite material suitable for parts like engine connecting rod which demand high strength and temperature sustainability at comparatively less weight. The composite will be made using casting process and Engine connecting rod will be designed in AutoCAD software.
Technical Paper

Corrosion and Corrosive Wear of Steel for Automotive Exhaust Application

2019-10-11
2019-28-0178
In the current scenario, durable exhaust system design, development and manufacturing are mandatory for the vehicle to be competitive and challenging in the automotive market. Material selection for the exhaust system plays a major role due to the increased warranty requirements and regulatory compliances. The materials used in the automotive exhaust application are cast iron, stainless steel, mild steel. The materials of the exhaust systems should be heat resistant, wear and corrosion resistant. Stainless steel is the most commonly used material in the automotive exhaust system. Due to increasing cost of nickel and some other alloying elements, there is a need to replace the stainless steel with EN 8 steel. Recent trends are towards light weight concepts, cost reduction and better performance. In order to reduce the cost and to achieve better wear and corrosion resistance, the surface of the EN 8 steel is modified with coatings.
Technical Paper

Tensile and Fatigue behavior of shallow cryogenically treated En19 alloy steel

2019-10-11
2019-28-0100
Wear, tensile and axial fatigue tests were conducted on shallow cryogenically treated En19 medium carbon alloy steel to investigate its mechanical behavior. The test samples are conventionally heat treated then oil quenched at 34 ˚C. Followed by the samples were kept under shallow cryogenic treatment to -80˚C for 12 hours using liquid nitrogen. Then the samples were tempered in a muffle furnace to relieve the induced residual stresses. Wear, Tensile and axial fatigue test was carried out on both treated and non-treated samples to measure its wear resistance, tensile strength and fatigue behavior respectively. Microscopic examination also done using scanning electron microscope to compare the effect of shallow cryogenic treatment on its microstructure. The results exposed that there is a reduction in the tensile strength and fatigue life of shallow cryogenically treated samples over base metal and improved wear resistance.
Technical Paper

Design and analysis of De-laval restrictor with throttle body for formula Vehicle

2019-10-11
2019-28-0009
Design and analysis of De-laval restrictor with throttle body for formula Vehicle Dr Soundararajan SKECT , Mr. Pradeep C, Force Motors , Mr. Ashwin Sriram, SKECT. Abstract Restrictor is a component which controls the mass flow of air passing to the engine. The proposed work focuses on design and analysis of air intake restrictor of Duke 390cc engine which is used in formula vehicles. As a constraint of this system, the air flows through a single circular throat of diameter 20mm. In past decades conventional venturi nozzles were used as a restrictor but it leads to nominal press drop. The main objective is to utilize De-Laval Nozzle for the minimal pressure drop. The change in pressure will increases the engine power output. The analysis is done by varying design conditions such as three levels of convergent (12,14 and 16 degree) and three levels of divergent angles (4, 6 and 8 degree) are taken into consideration.
Technical Paper

Assessment of tribo meter study of 20MnCr5 alloy steel under case hardened and shot peened condition

2019-10-11
2019-28-0098
This research is constrained to study the strength and wear resistance of 20MnCr5 (SAE 5120) alloy steel under monolithic, case hardened and case hardened with shot peening processing condition. Improve the hardness of the material by enhancing the core and surface strength of case hardened with shot peened sample. The principle goal of this proposed work is to conduct the tribo meter test for the three test samples by differing the load of 5, 10, 15 and 20N and sliding speed of 290,580,870 rpm respectively. The impact on tribo meter process parameters on wear rate and co-efficient of friction be calculated and recorded for this study. Less wear rate and nominal co-efficient of friction was observed for case hardened with shot peened sample. Load and sliding distance increases wear rate decreases and co-efficient of friction increases for all the tested samples due to oxide layer formation.
X