Refine Your Search

Topic

Author

Affiliation

Search Results

Technical Paper

A novel approach on range prediction of a hydrogen fuel cell electric truck

2019-11-21
2019-28-2514
A novel approach on range prediction of a hydrogen fuel cell electric truck C.Venkatesh - Manager - Product Development, Sustainable Mobility & Advanced Technologies Abstract: A novel approach on range prediction of a hydrogen fuel cell electric vehicle Abstract: Today's growing commercial vehicle population creates a demand for fossil fuel surplus requirement and develops highly polluted urban cities in the world. Hence addressing both factors are very much essential. Battery electric vehicles are with limited vehicle range and higher charging time. So it is not suitable for the long-haul application. Hence the hydrogen fuel cell based electric vehicles are the future of the commercial electric vehicle to achieve long range, zero emission and alternate for reducing fossil fuels requirement. The hydrogen fuel-cell electric vehicle range, it means the total distance covered by the vehicle in a single filling of hydrogen into the onboard cylinders.
Technical Paper

A DIGITALIZED VALIDATION APPROACH FOR REAL TIME AND REMOTE MONITORING OF AN OFF HIGHWAY VEHICLE PERFORMANCE

2019-11-21
2019-28-2531
A DIGITALIZED VALIDATION APPROACH FOR REAL TIME AND REMOTE MONITORING OF AN OFF-HIGHWAY VEHICLE PERFORMANCE V.Jagannathan 1.a* , B.Jaiganesh 2.b & S.Sudarsanam 3.c Mahindra & Mahindra Limited, Mahindra Research Valley, Mahindra World City, Anjur PO, TN, India Corresponding author Email- V.JAGANNATHAN@mahindra.com Validation of agricultural tractors is necessary to ensure that these machines perform to their expected potential and are aptly matched with implements. Testing these machineries in real-time while performing activities in the field allows a bigger picture to be seen; the performance data incorporates the effects of many external factors (Soil, Climate etc.). Tractor Performance data apprehending is the vital part of validation. Data acquisition of key performance parameters during field validation in different application/different countries is of utmost importance.
Technical Paper

Wiring Harness Optimization towards Wireless Vehicle

2019-11-21
2019-28-2530
Paper Title - Wiring Harness Optimization towards Wireless vehicle Research and/or Engineering Questions/Objective (maximum 100 words)  In current scenario, wiring harness plays a vital role in inter-connecting electrical & electronic components fitted all across the vehicle.  As per cable standard, DIN 72551 or ISO 6722, copper conductors being used in stranded wires against cable cross-section & corresponding weight.  While going complete wire-less requires each component to have its own battery, ground, transmitter & receiver which indeed is a very costly affair to be employed in vehicle as huge development cost is required.  Here I'm suggesting an innovative method to make a vehicle apparently Wire-Less by creating local clusters connected to each other via conventional wiring harness & wire-less module.  Such method will apparently give a look of Wire-less vehicle itself & better advantages in terms of installation, service, troubleshooting, uptime & customer delight.  Moreover, direct benefits of Cost, Weight, FE will also be achieved.
Technical Paper

LIGHT WEIGHTING OF ADDITIVE MANUFACTURED PARTS FOR AUTOMOTIVE PRODUCTION APPLICATIONS THROUGH TOPOLOGY OPTIMIZATION TECHNIQUES

2019-11-21
2019-28-2544
Rapidly enhancing engineering techniques to manufacture components in quick turnaround time have gained importance in recent time. Manufacturing strategies like Additive Manufacturing (AM) are a key enabler for achieving them. Unlike traditional manufacturing techniques such as injection molding, casting etc., AM unites advanced materials, machines, and software which will be critical for Industry 4.0. Successful application of AM involves a specific combination and understanding of these three key elements. In this paper the AM approach used is Fused Deposition Modelling (FDM). Since material costs contribute to 60% of the overall FDM costs, it becomes a necessity to optimize the material consumption of the produced parts. This paper reports case studies of 3D printed parts used in an Automobile plant’s production aids, which utilize computational methods(CAE), topology optimization and FDM constrains (build directions) to manufacture the part in the most optimal way.
Technical Paper

Design of Additive Manufactured Thermoplastic Component as FMVSS 201U Countermeasure

2019-11-21
2019-28-2547
Research and/or Engineering Questing/Objectives: Safety of the occupant in passenger cars is one of the regulatory requirements in many developed countries. This includes upper interior head impact load case of the unbelted occupant during crash (FMVSS 201U) as one of them. During a crash event the occupant head can collide with the interior parts of the vehicle, such as a headliner, pillar trim and other subsequent components in the loading direction. Injury on the head is quantified in terms of the Head Injury Criterion of a crash test dummy (HIC(d)) value which should be less than 1000 per standard. Several ways can be adopted to reduce the HIC(d) value. These include a change in the design of ribs in the safety plastic components, headliner profile change, use of countermeasure foam between headliner and the exterior sheet metal parts, or a combination of any of these to absorb the energy of impact.
Technical Paper

High rigidity and light weight bumper material development in India

2019-11-21
2019-28-2553
Vehicle weight reduction becomes important at the view point of fuel efficiency improvement and CO2 reduction in India also as well as developed countries. With this background, High tensile and Super high tensile steel application has become increasing. Similary, weight reduction of big plastic parts like bumper face is one of the most important items, so Honda has developed Thin-wall and light weight bumper face. In the development of light weight bumper, rigidity, impact strength and flowability which are main requirement are cotradictory property. It is necessary to develop new material to achieve this technical concern. Moreover, we verified part shape and thickness optimization to achieve part requirement. Established high property material and part manufacturing technology were applied for current CITY firstly, and it has been expanded to other models sequentially to contribute weight reduction for Honda vehicles.
Technical Paper

ENHANCE STRENGTH, ACCURACY AND PRECISION OF THE 3D PRINTED ASSEMBLY AID GAUGES

2019-11-21
2019-28-2568
ENHANCE STRENGTH, ACCURACY AND PRECISION OF THE 3D PRINTED ASSEMBLY AID GAUGES Ramesh Kavalur1, Raghavendra Rao 1 1 Body in White, Manufacturing Engineering, General Motors Technical Centre India Pvt. Ltd, India, Keywords - Additive manufacturing, assembly aid gauges, 3D printer. Research Objective - Automotive manufacturing impressively implementing 3D printed jigs and fixtures. Traditional manufacturing of metal assembly aid gauges have limitations such as lead time and causes dent and rough marks on the outer panel of the body. On the other hand, 3D printed jigs and fixtures, demands more time (depends on complexity), have low level of precision and they offer lower strength. It is observed that this occurs because of the inefficient design and manufacturing without understanding the functionality and capability of the 3D printer.
Technical Paper

NEXT GENERATION POWER DISTRIBUTION UNIT IN WIRING HARNESS

2019-11-21
2019-28-2571
Keywords – Miniaturization, Low Profile (LP) Relays, Low Profile (LP) Fuses, Fuse box, Wiring Harness Research and/or Engineering Questions/Objective With the exponential advancement in technological features of automobile’s EE architecture, designing of power distribution unit becomes complex and challenging. Due to the increase in the number of features, the overall weight of power distribution unit increases and thereby affecting the overall system cost and fuel economy. The scope of this document is to scale down the weight and space of the power distribution unit without compromising with the current performance. Methodology Miniaturization involves replacing the mini fuses and J-case fuses with LP mini and LP J-case fuses respectively. The transition doesn’t involve any tooling modification and hence saves the tooling cost.
Technical Paper

Automobile Exhaust Emmision Control- A review

2019-11-21
2019-28-2382
Since the 20th century increase in the number of cars in the major cities is been a point of concern because of the toxic gasses being emitted from the engine of an automobile. These gasses are polluting the atmosphere and degrading the air to breathe. The main gasses responsible for the degradation of air quality are carbon monoxide, hydrocarbon and oxides of nitrogen. There is a necessity to find ways to reduce the pollution emitted into the atmosphere from the automobile. The source of emission is either evaporation from fuel tank or carburetor which is easy to be dealt with or harmful gasses due to improper combustion which is a concern for the environment. The two ways to reduce these emissions are, modification in the engine to minimize the production of harmful gases and to treat the harmful gasses emitted from the engine before blowing it into the atmosphere from the exhaust. Catalysts help to break harmful gasses into smaller compounds that are environment-friendly.
Technical Paper

Aerodynamic Analysis of a Passenger Car to Reduce Drag using Active Grill Shutters and Active Air Dams

2019-11-21
2019-28-2408
Active aerodynamics can be defined as the concept of reducing drag by making real-time changes to certain devices such that it modifies the airflow around a vehicle. Using such devices also have the added advantages of improving ergonomics and performance along with aesthetics. A significant reduction in fuel consumption can also be seen when using such devices. The objective of this work is to reduce drag acting on a passenger car using the concept of active aerodynamics with grill shutters and air dams. First, analysis has been carried out on a baseline passenger car and further simulated using active grill shutters and air dams for vehicle speed ranging from 60 kmph to 120 kmph, with each active device open from 0° to 90°. The improved model obtained is then subjected to variations in yaw angle ranging from -18° to +18°. The optimized model is then validated for a scaled down prototype in a wind tunnel.
Technical Paper

Steering and Handling Performance Optimization Through Correlation of Objective - Subjective Parameters and Multi-body Dynamics Simulation

2019-11-21
2019-28-2412
RESEARCH OBJECTIVE: Automobile Industry has driven through the ages with continuous development with innovative technologies and frugal engineering. Expectation of customer is also increasing through the generations. To meet the customer demand for performance and be best in market, OEM needs to deliver best performance of vehicle with cost effective and short development process. Steering and Handling of vehicle is one of major customer touchpoints and needs to be tuned to achieve various conflicting requirements. The objective of this research is to optimize the steering and handling using correlation between three major methods of evaluation. METHODOLOGY: Methodology for optimization of steering and handling performance using correlation between subjective evaluation, objective measurement and multi-body-dynamic simulation is presented.
Technical Paper

Effect of variable payload on Vehicle dynamics of Passenger buses in Indian usage conditions

2019-11-21
2019-28-2411
A high impetus from Government on road infrastructure development, is giving a fillip to passenger CV space. This has resulted in making the passenger CV segment lucrative enough, thereby pulling in many operators in the business. The quality of road has immensely improved over a decade, as a result of which the average speed and hence the quantum of distance covered by passenger buses has increased significantly. People are preferring to travel in buses over trains, owing to at par ticket cost, high availability, reduced travel time and also improved level of comfort. Aligned to the market need and the trend, OEM's are offering buses with capable powertrains to cater the need of speed, reduced trip time as well as a lot of attention is also being paid to tune in the comfort level for long hauls. A big chunk of passenger travel is catered by the bus operators especially during major festivals in India.
Technical Paper

SmartPlay Studio-A Connected Infotainment Development

2019-11-21
2019-28-2440
Infotainment has been always an important aspect of life which has made its way to car design. The cars today are much more advanced compared to their predecessors. The in-vehicle infotainment advancements have followed the consumer electronics market in terms of technologies such as Touchscreen, App based Navigation, Voice Assistant and other multimedia services. This trend is going to expand further as smartphones have revolutionized the infotainment domain with awareness and accessibility to customers. The infotainment system in the cars are expected to be connected not only to the cloud but various vehicle controllers to display host of information & controls at customer`s fingertips. To design a system that supports connectivity to both cloud and vehicle is challenging in terms of cost and design for the OEMs. With focus on Indian market condition and global trends, this paper analyzes the customer expectation for Connected Infotainment system.
Technical Paper

DEVELOPMENT OF A FLEET MANAGEMENT SYSTEM FOR AN OFF-HIGHWAY VEHICLE

2019-11-21
2019-28-2439
DEVELOPMENT OF A FLEET MANAGEMENT SYSTEM FOR AN OFF-HIGHWAY VEHICLE V.Jagannathan 1.a* , B.Jaiganesh 2.b & S.Sudarsanam 3.c Mahindra & Mahindra Limited, Mahindra Research Valley, Mahindra World City, Anjur PO, TN, India Corresponding author Email- V.JAGANNATHAN@mahindra.com Managing an off-highway vehicle fleet during validation is a challenging task. Complexity is acquainted when more than 100 vehicles with different horse power (hp) & with different product configuration working across India and other parts of countries. Traditionally, a tractor validation involves data collection such as usage hours (Hour meter reading on cluster), locations etc. which are recorded in spread sheet and updated to the respective project owners on daily basis through mail communications. A manual recording and consolidation of tractors validation status is prone to error, reiterative work, consumes more resource and effort.
Technical Paper

Enhanced Road condition monitoring for developing countries

2019-11-21
2019-28-2462
"According to Data on Road accidents in India by Transport Research Wing of Ministry of Road Transport & Highways, more than 4 Lakhs road accidents happened every year from year 2003 to 2017. Poor road conditions and badly designed roads are the common cause of road accidents besides the driver's negligence. Poor roads and badly designed speed breakers are common in developing countries. Apart from accidents, poor road conditions can cause excessive fuel consumption & damage to vehicles. Road condition monitoring solutions aim to warn the drivers of upcoming bad patch on the road and optionally report road conditions to authorities. There are multiple existing solutions that use motion sensors and GPS to detect a bad patch on the road. The presented solution builds over capability of existing solutions by adding useful features making it more practical and useful.
Technical Paper

INTRODUCTION OF GREEN LED LIGHT FOR SAFETY, POLLUTION CONTROL, FUEL SAVING AND MOTION INDICATOR IN AUTOMOBILES.

2019-11-21
2019-28-2455
Research and/or Engineering Questions/Objective - This invention relates to introduction of GREEN LED LIGHT for safety, fuel saving, pollution control and motion indicator in automobiles. At present, every vehicle is provided with red light, orange light and white light at the rear end of the vehicle. Now, there is no such light which can tell about the motion of the vehicle, whether the vehicle's engine is using its power to move or going on in rolling condition. According to the present invention a GREEN LED LIGHT is introduced at the rear end f the vehicle. The green led light is on when the vehicle is using its engine's power to move. At present, when we drive behind the vehicle we continuously make assumption about the motion of the vehicle in front of us. This GREEN LED LIGHT will give exact information about the motion of the vehicle.
Technical Paper

Realtime Tuning and optimization of EV traction motors with controllers on E-motor testbench

2019-11-21
2019-28-2478
The need for dedicated development of indigenous electric power-train is becoming much essential in the recent times with upcoming trends and policies. Hence, The validation and optimization of the newly developed electric power-train becomes much crucial in order to ensure smooth real world operation. This can be only possible in E-motor test benches with dedicated equipment for thorough evaluation. Also, there are no practical limitations to check the peak characteristics in a controlled laboratory environment. Initially, the motor is setup by mechanically coupling with the dynamo-meter and the controller in the open loop method with constant parameters to check steady state operability without load or external parameters that affect the torque production and speed of the drive. Then progresses to closed loop method incorporating the feedback control and external parameters including torque loading at the shaft from the dynamo-meter.
Technical Paper

Electric Commercial Vehicles And Charging Solutions

2019-11-21
2019-28-2476
Objective : Objective of the paper is to acquaint the audience with the concept of electric vehicles, Powertrain components used in an electric bus, Siemens contribution to the field of Electromobility, Typical configurations used in an electric bus, challenges and current limitations, emerging Technologies, future, how to address the future charging infra requirement. Methodology : The subject shall be discussed with the audience through a presentation coupled with Explanation by the presenter. The topic shall be opened with the concept of electromobility followed By history of electromobility at Siemens, contribution to the field of electro mobility, typical configurations of electric vehicles, Advantages of electric vehicles vis a vis conventional diesel buses, typical configurations of an electric bus, feasibility of electric buses for various transport services. Comparison of induction motor Vs.
X