In your profession, an educated understanding of internal combustion engines is required, not optional. This two-day technology survey seminar covers the most relevant topics - ranging from the chemistry of combustion to the kinematics of internal components of the modern internal combustion engine - for maximum comprehension. Attendees will gain a practical, hands-on approach to the basics of the most common designs of internal combustion engines, as they apply to the gaseous cycles, thermodynamics and heat transfer to the major components, and the design theories that embody these concepts.
This is a three-day course which provides a comprehensive and up to date introduction to fuel cells for use in automotive engineering applications. It is intended for engineers and particularly engineering managers who want to jump‐start their understanding of this emerging technology and to enable them to engage in its development. Following a brief description of fuel cells and how they work, how they integrate and add value, and how hydrogen is produced, stored and distributed, the course will provide the status of the technology from fundamentals through to practical implementation.
Today’s frenetic engine manufacturing and transportation sector and its related traces viz; noise and vibration of our modern societies has adverse effect on environment as well as all of us. Modern research affords us the opportunity to understand the subject better and to develop advance technologies. Widely immediate slogan and goal of all industries might be to improve the performance and reduce emission using alternative fuel while, make the quietest and smoothest running Engines. To, reduce the dependency on diesel fuel (Due to rapid worldwide depletion) Biodiesel is one of the immediate, alternative and complimentary solution. In the Present study, to optimize the operating parameters of the Direct Injection Single Cylinder (5.2 kw) CI engine with respect to Brake Thermal Efficiency (BTE), Carbon monoxide (CO), Oxides of Nitrogen, Hydrocarbons (HC) etc..
In development of more electric aircraft applications, it is important to discuss aircraft energy management on various level of aircraft operation. This paper presents a computationally efficient optimization model for evaluating flight efficiency on global and interval flight ranges. The model is described as an optimal control problem with an objective functional subjected to state condition and control input constraints along a flight path range. A flight model consists of aircraft point-mass equations of motion including engine and aerodynamic models. The engine model generates the engine thrust and fuel consumption rate for operation condition and the aerodynamic model generates the drag force and lift force of an aircraft for flight conditions. These models is identified by data taken from a published literature as an example. First, approximate optimization process is performed for climb, cruise, decent and approach as each interval range path.
Aircraft service has been increasing today and it also results in the increase of the greenhouse gas emission. To solve this problem, the electric aircraft propulsion system is the key solutions to realize the clean and high efficiency aircraft, while demanding higher output density motors. So far, though 5 kW/kg is realized with permanent magnet type synchronous motors, the electric aircraft for over 100 passengers demands motors with 16 -20 kW/kg. Superconducting (S.C.) technology is one of the effective candidates for higher output density motors. In comparison with copper wires, the S.C. wires have higher current density at less than –200 ℃. And we can make a lighter weight coil with the S.C. wires. So far, many groups have been studying the S.C. motors over 16 kW/kg. Generally, there are two kinds of S.C motors. One is the S.C. motors made of the S.C. field coils and copper armature windings. The other is the fully S.C. motors using S.C. field and armature windings.
Over recent decades, there has been a lot of progress toward a more electric aircraft (MEA) to reduce emissions and fuel consumption. In MEAs, many subsystems that previously used hydraulic or pneumatic power have been replaced by electrical systems with inverters and electrical machines. Therefore, MEAs reduce the weight, i.e. fuel consumption, and maintenance cost. To achieve advanced electrical systems, the weight of inverters has significant importance. In this work, a gradationally controlled voltage (GCV) inverter is proposed to reduce the weight and enhance reliability. A GCV inverter can supply gradational quasi-sinusoidal voltages combining two different voltages from a 3-phase 3-level (main) inverter and three single-phase H-bridge (sub) inverters. A dc power supply is required only for the main inverter. A main inverter with Si-IGBTs supplies the fundamental voltage by only one switching in the fundamental period.
This course will introduce the participants to the factors governing fuel-material compatibility and methods to predict and empirically determine compatibility for new alternative fuel chemistries. By understanding the mechanisms and factors associated with chemically-induced degradation, participants will be able to assess the impact of fuel chemistry to infrastructure components, including those associated with vehicle fuel systems. This course is unique in that it looks at compatibility from a fuel chemistry perspective, especially new fuel types such as alcohols and other biofuels.
The impact of transport on global and local pollution have resulted in stricter emission limits. More specifically, increasing attention is being paid to particulate emissions at the exhaust gases in spark ignition engines. The particulate formation is mainly affected by: 1-fuel properties, 2-engine and fuel system characteristics and 3-Exhaust after-treatment system. In order to estimate the influence of fuel characteristics on particulate emissions, several research works have proposed fuel indices that correlate some of the fuel physical and chemical properties with engine particulate emissions. This work investigates the impact of fuel composition on particulate emissions and evaluates the Particulate Matter Index (PMI) proposed by Aikawa et. al, and other fuel indices, in terms of agreement with vehicle test bed results for a passenger car.
Homogeneous charge compression ignition (HCCI) is a promised solution to environmental and fuel economy concerns for IC engines. Engine application for HCCI engine depends on an array of parameters such as fuel type, mixture composition, intake condition and engine specification, meaning that controlling an HCCI engine can only be done through the adjustment of these parameters. In this numerical study which is driven from an experimental work, thermal and charge stratification is used to control HCCI combustion. The effect of intake temperature, compression ratio, intake pressure, EGR, reformer gas (CO-H2 mixture) and glow plug temperature on engine performance and emission was investigated using a 3D model on AVL-FIRE parallel with 1D model on GT-Power software. Then AHP model as a multiple Attribute Decision making method has been used to analyze the sensitivity of these parameters on performance and emission.
The present work investigates some recalibration possibilities of a 1.4l common rail turbo-charged diesel engine for the optimal operation in terms of emissions and fuel consumption (FC) with pure Hydrotreated Vegetable Oil (HVO). Initially, steady-state experimental data with nominal engine settings revealed HVO benefits as a drop-in fuel. Under these conditions, pure HVO is associated with lower engine out PM (up to 75%) and CO2 (up to 10%) emissions, and lower mass-based FC (up to 9%), while NOx are similar or slightly higher to diesel fuel. At the next step, a combustion model was developed for the particular engine targeting to identify the optimal IT (Injection Timing) and EGR settings for further emissions (PM, NOx and CO2) and FC reduction with pure HVO. For this purpose, four re-adjusted IT and EGR maps were developed with both conventional diesel and HVO.
In this paper, a numerical and experimental assessment of post injection potential for soot emissions mitigation in an off-road diesel engine is presented, with the aim of supporting hardware selection and engine calibration processes. As a case study, a prototype off-road 3.4 liters 4-cylinder diesel engine developed by Kohler Engines was selected. In order to comply with Stage V emission standards without a dedicated aftertreatment for NOx, the engine was equipped with a low pressure cooled EGR, allowing high EGR rates (above 30%) even at high load. To enable the exploitation of such high EGR rates with acceptable soot penalties, a two stage turbocharger and an extremely high pressure fuel injection system (up to 3000 bar) were adopted. Moreover, post injections events were also exploited to further mitigate soot emissions with acceptable Brake Specific Fuel Consumption (BSFC) penalties.
Despite syngas is a promising alternative fuel for internal combustion engines (ICEs), its extensive adoption has not been adequately investigated so far. The dedicated literature offers several fundamental studies dealing with H2/CO blends burning at high pressure and room temperature, as well as preheated mixture at low pressure. However, these thermodynamic states are far from the operational conditions typical of ICEs. Therefore, it is essential to investigate the syngas combustion process at engine-like conditions to shed light on this fuel performance, in order to fully benefit from syngas characteristics in ICE application. One of the key properties to characterize a combustion process is laminar flame speed, which is also used by the most widespread turbulent combustion models.
This paper deals with the experimental and numerical investigation of a 2.0 litre single cylinder Heavy Duty Diesel Engine fuelled by natural gas and diesel oil in Dual Fuel mode. Due to the gaseous nature of the main fuel and to the high compression ratio of the diesel engine, reduced emissions can be obtained. An experimental study has been carried out at three different load level (25%, 50% and 75% of full engine load). Basing on experimental data, the authors’ methodology is based on the use of one-dimensional and 3-dimensional models. The former is able to perform the whole engine with faster simulations while the latter can study deeply the even more complex phenomena (turbulence, combustion, etc.), due to the presence and to the interaction of the two fuels, which occur in the cylinder for the most interesting operating conditions.
Gasoline, direct injection engines represent one of the most widely adopted powertrains for passenger cars. However, further development efforts are necessary to meet the future fuel consumption and emission standards imposing an efficiency increase and a reduction of particulate matter emissions. Within this context, computational fluid dynamics is nowadays a consolidated tool to support engine design and development and this work is focused on the development of a set of CFD models for the prediction of combustion and soot formation in modern GDI engines. The one-equation Weller model coupled with a zero-dimensional approach to handle initial flame kernel growth was applied to predict flame propagation. Soot formation was described with a semi-empirical, two-equation model accounting for the most important steps such as nucleation, surface growth, coagulation and oxidation.
The present work describes the numerical modeling of medium-speed marine engines, operating under a fumigated dual-fuel concept, i.e. with the second fuel injected in the ports. Due to the need to reduce engine-out emissions while maintaining engine efficiency, manufacturers are investigating new engine technologies. In the maritime industry, a promising technology to achieve these goals is that of fumigated dual-fuel engines, allowing a large amount of diesel to be replaced by a premixed fuel. To fully optimize the operational parameters of such a large maritime engine, computational fluid dynamics can be very helpful. Accurately describing the combustion process in such an engine is key, as the prediction of the heat release and the pollutant formation is crucial. Auto-ignition of the diesel fuel needs to be captured, followed by the combustion and flame propagation of the premixed fuel.