Search Results

A major challenge in predicting driveline torsionals is the modeling of major energy dissipation mechanisms in the driveline. Primary candidates for such mechanisms are viscous dampers and dry friction (hysteresis) dampers which are specifically included by the designers to disperse the energy of torsional vibrations. The inherent structural and other internal damping in the components of the driveline is small as compared to those of viscous and dry friction dampers. Past attempts to model clutch hysteresis have repeatedly resorted to the classical approach of modeling that has been reported many years ago. However, such an approach is oversimplified and assumes, for instance, that the hysteretic effects are independent of the frequency. In addition, the motion of the damper is assumed to be purely harmonic. Also, such studies rely solely upon the static hysteresis characterization of the elements, particularly within the clutch.

New analysis methods have been developed which allow heavy duty diesel engine cylinder head to block joints to be studied in a more effective manner. Failure analysis can yield more meaningful, quantitative results through the use of X-rays and microhardness measurements. Experimental methods of determining direction and magnitude of thermal motion, interactions between cylinder pressure and thermal cycling, and the relationship between leak pressure and thermal condition have been developed. Deep thermal cycle dynamometer testing has also been used successfully to duplicate failure modes seen in the field.

A detailed methodology is presented in this paper for a complete assessment of various forces, torques, and kinematic effects due to universal joint angularities and shaft yoke phasing. A modular approach has been adopted wherein constitutive equations represent each of the key elements of a driveline namely the driveshaft, coupling shaft, universal joint, and the transmission/axle shafts. Concentrated loads are used wherever loads are being transferred between the elements of a driveline. Local matrices are developed for the equilibrium of the respective driveline members. The local matrices are then assembled into a global matrix and solved for the kinematic state of the complete driveline. A 6x15 matrix has been developed to represent a general shaft in the system and a 6x10 matrix has been developed for a universal joint cross. This gives us a complete picture of all the loads on all driveline members.

It is common for difficult shifting to occur in synchronized transmissions. High shift effort is recognized as a basic performance malfunction that takes place during synchronization. This paper examines shift quality in vehicles with synchronized transmissions. The present study is working on three categories: a mathematical model and computer simulation of transmission shifts, an experimental verification of the model and program, and an engineering method for rating shift quality. The mathematical model in this study is a refinement of a model from an earlier paper [1]. With experience, this model has seen revisions that allow the results to be more accurate than the previous ones. The model takes into considerations many elements that affect the synchronizing process such as: synchronizing torque, inertia of both clutch disc(s) and transmission components, clutch drag, viscous drag in the transmission, shifting RPM's, etc.

The present paper is a continuation of engineering efforts devoted mathematical modeling and computer simulation presented in [1]. The modeling and study is extended on starting a vehicle with use of a throttle. The basic mathematical model utilized in [1] has had to be modified because clutch engagement with throttle make investigators consider new human factors contributing strongly to starting conditions. In particular, not only the clutch release but also the accelerator pedal are controlled by a vehicle operator. This has made the authors modify the definition of an ideal engagement and incorporate both the throttle level and the throttle lead time to the mathematical model. Moreover, the model has been adjusted to consolidate dissimilar low range characteristics for diesel and gas engines.

The present research constitutes an engineering approach to the performance level prediction of starting a vehicle without use of a throttle. The study is based on a dynamic clutch engagement model. A computer simulation of engagement dynamics is used in order to study the lock-up mechanism and to develop proper prediction procedures. In addition, the engagement model is used to develop guidelines and recommendations in order to optimize the engagement system including clutch components, clutch controls, and engine controls. The mathematical model presented in this paper incorporates important, new features in comparison to similar models from previous publications. Consisting of two inertias, it includes not only elastic properties of the clutch damper but also varying engine torque and clamping (pressure) force. Functions of engine torque and plate load simulate the actual control process, including human factors.

Spicer has developed a new family of transmissions for the class 8 series truck. This paper describes the specifications, design features and thought processes that generated this new transmission design.

A new series of truck transmission has been developed with the intent of customizing the ratios to the engine and the job. Two years of laboratory and field testing has been completed on these transmissions, proving their reliability and performance. This paper covers the development of a new series of heavy duty truck transmissions utilizing the split torque concept of power flow. A chronicle of the development is set forth, as well as an assessment of the most salient features of this series of transmissions. A statement of the present status of the transmission series also is presented.

A turbine engine powered vehicle requires a power transmission system with distinct differences over one required with other powerplants. The power transmission components can be modified to accommodate the new requirements. As turbine engines become more popular a more optimum approach to power transmissions is needed. Some reasonable possibilities are discussed. The manner in which components have been applied and the results obtained along with future possibilities are covered in the area of clutches, mechanical transmissions, and drivelines and axles.

This paper describes a method of vehicle performance prediction which adapts readily to digital programming. A prime mover which may be a gas turbine or a reciprocating internal combustion engine, a hydraulic torque converter, and/or a mechanical transmission, comprising the vehicle drive train, are transformed into numerical equivalents. The performance prediction itself is in three major parts, namely, the engine-converter compatibility, the converter range performance, and the lockout or direct drive performance. The computer transforms the engine data into equation form by curve fitting; predicts the optimum shift point as the intersection of the net tractive effort in converter drive with net tractive effort in direct drive; calculates; stores; interpolates; and prints a complete set of data.

This is a study of driveline torque associated with re-tarders when used as a means of controlling vehicle downhill speed. Using two commercially available retarders for field testing, the working principle and driving method for each is briefly explained. Data compiled from field tests is summarized in chart form providing a direct comparison between ascending driveline torque and the torque imposed on the driveline when descending the same hill, using a hydraulic driveline retarder, an engine retarder, or service brakes. The resulting comparison provides the basic guide for the design and evaluation of present components used in conjunction with retarders.

THE INCREASED use of midship-mounted transmissions in large equipment has emphasized the need for a torsionally resilient connection from the engine to reduce vibration transfer. To increase the torsional flexibility needed in these systems, the spring rate of the system must be reduced by such constructions as a flexible coupling, a spring-loaded damper, or a rubber torsional spring. This paper discusses these systems, emphasizing rubber springs. Some advantages of such a drive are: it provides an amplitude limitation with impact loads and a cushion to reduce noise and prevent clattering and contacts noises on parts with backlash, it smooths out transition periods to reduce loads on bearings and gears, its clamping characteristics can be adjusted by various rubbers, and its rubber cushion provides a degree axial flexibility.*