Search Results

Low Pressure Cooled Exhaust Gas Recirculation (LP EGR) is an attractive technology to reduce fuel consumption for a spark-ignition (SI) engine, particularly at medium-to-high load conditions, due to its knock suppression and combustion cooling effects. However, the long LP EGR transport path presents a significant challenge to the transient control of LP EGR for the engine management system. With a turbocharged engine, this is especially challenging due to the much longer intake induction system path compared with a naturally aspirated engine. Characterizing and modeling the EGR, intake air mixing and transport delay behavior is important for proper control. The model of the intake air path includes the compressor, intercooler and intake plenum. It is important to estimate and track the final EGR concentration at the intake plenum location, as it plays a key role in combustion control. This paper describes the development of a real-time, implementable model for LP EGR estimation.

Samples of 33% glass filled and unfilled poly(butylene terephthalate) [PBT] and nylon 66 (PA66) were injection molded into bars,which were immersed in common engine and powertrain fluids: antifreeze, motor oil and automatic transmission fluid for 25 days. Fluid uptake was measured at 1, 7, 18, and 25 days by gravimetry. Both PBT samples absorbed 0.2-0.25% antifreeze and 0.05 - 0.10% motor oil and automatic transmission fluid (ATF). Both DSC and DMA analysis showed no disruption of polymer thermal transitions or storage moduli. The glass filled PA66 sample absorbed 2.5% antifreeze and 0.25-0.3% of motor oil and ATF and showed an 80°C reduction in the tan delta maximum on DMA. The unfilled PA66 sample absorbed 7% antifreeze and 0.2-0.3% of motor oil and ATF also showed a tan delta maximum 80°C less than the unexposed control. Creep analysis was conducted on the unfilled nylon sample and compared to a virgin material.

Low-pressure, Cooled Exhaust Gas Recirculation (LPC EGR) brings significant fuel economy, NOx reduction and knock suppression benefits to a modern, boosted, downsized Spark Ignition (SI) engine. As a prerequisite to design an engine control system for LPC EGR, this paper presents development of a set of estimation algorithms to accurately estimate the flow rate, pressure states and thermal states of the LPC EGR-related components.

A gasoline compression-ignition combustion system is being developed for full-time operation over the speed-load map. Low-temperature combustion was achieved using multiple late injection (MLI), intake boost, and moderate EGR for high efficiency, low NOx, and low particulate emissions. The relatively long ignition delay and high volatility of RON 91 pump gasoline combined with an advanced injection system and variable valve actuation provided controlled mixture stratification for low combustion noise. Tests were conducted on a single-cylinder research engine. Design of Experiments and response surface models were used to evaluate injection strategies, injector designs, and various valve lift profiles across the speed-load operating range. At light loads, an exhaust rebreathing strategy was used to promote autoignition and maintain exhaust temperatures. At medium loads, a triple injection strategy produced the best results with high thermal efficiency.

SAE 2011 High Efficiency IC Engines Symposium - Session 3 - Advanced Diesel Engine Technologies Presenter Andrew Brown, Delphi Corp.

Gasoline Direct injection (GDi) systems offer performance and /or fuel consumption advantages compared to the traditional lower pressure port fuel injected technology. One disadvantage of GDi is the higher level of audible noise produced by the high pressure GDi system components. Powertrain noise is a known warranty complaint across the automotive industry. This paper presents an objective comparison of acoustic noise emitted by eight solenoid actuated fuel injector designs during their normal operation, including at engine idle, where powertrain noise is more noticeable to the customer. Taguchi Robust Engineering methods will be used to conduct an assessment of the noise generated by various GDi fuel injector designs. Injector fixturing, measurement procedures, and their impact on reducing test-to-test measurement variation are discussed.

A high-frequency electrical resonance-based ignition concept is in development to replace conventional spark ignition functionality for gasoline engines employing various types of fuel injection methods. The concept provides the benefit of a continuous discharge phase and the electrical power of the discharge can also be adjusted to the needs of the combustion conditions. This concept employs an alternative method of generating high voltages, using inductors and capacitors trimmed such that the supplied energy steadily increases the output voltage. This configuration is widely known as Tesla transformer and has been engineered to operate in a modern gasoline engine combustion environment. This development allows very high break down voltages to be generated and the power into the spark itself can be influenced.

Gasoline direct injection (GDi) engines have become popular due to their inherent potential for reduction of exhaust emissions and fuel consumption to meet increasingly stringent environmental standards. These engines require high-pressure fuel injection in order to improve the fuel atomization process and accelerate mixture preparation. To achieve a lower-cost system, a single-piston high-pressure fuel pump design is often employed due to its relative simplicity. However, pumps of this design are acknowledged as the source of high levels of fuel pressure fluctuations which can lead to audible noise, variations in the amount and spray quality of fuel delivery from cylinder to cylinder, compromised durability and consumer dissatisfaction. In this paper, the design process for a high-pressure fuel rail assembly using Robust Engineering methodology is presented.

Safety is a key element in new vehicle design and active safety, together with driver distraction prevention, has become one of the most talked about issues in the mobility industry. This book features 20 SAE technical papers, originally published in 2009 and 2010, which showcase how the mobility industry is considering all aspects of safety in designing and producing safer vehicles. These papers were selected by SAE International's 2010 President Dr. Andrew Brown Jr., Executive Director and Chief Technologist for Delphi Corporation. The contents of this book explore a variety of safety issues in the areas of market and consumer preferences; driver assistance and modeling; active safety system, crash sensing and sensor fusion; communications; and road safety. The publication also includes a number of articles authored by renowned experts in the field of active safety.

This book features 20 SAE technical papers, originally published in 2009 and 2010, which showcase how the mobility industry is developing greener products and staying responsive - if not ahead of - new standards and legal requirements. These papers were selected by SAE International's 2010 President Dr. Andrew Brown Jr., Executive Director and Chief Technologist for Delphi Corporation. Authored by international experts from both industry and academia, they cover a wide range of cutting-edge subjects including powertrain electrification, alternative fuels, new emissions standards and remediation strategies, nanotechnology, sustainability, in-vehicle networking, and how various countries are also stepping up to the "green challenge".

Intake camshaft retard beyond that necessary for reliable cold start-ability is shown to improve part-load fuel economy. By retarding the intake camshaft timing, engine pumping losses can be reduced and fuel economy significantly improved. At high engine speeds, additional intake cam retard may also improve full-load torque and power. To achieve these benefits, an intake camshaft phaser with intermediate lock pin position (ILP) and increased phaser authority was developed. ILP is necessary to reliably start at the intermediate phase position for cold temperatures, while providing increased phaser retard under warm conditions. The phaser also provides sufficient intake advance to maximize low-speed torque and provides good scavenging for boosted engine applications. Design and development of the intermediate locking phaser system is described. The pros and cons of various methods of accomplishing locking and unlocking a phaser are illustrated.

This paper is an overview of the current state (calendar year 2010) of in-vehicle multiplexing and what pertinent technologies are emerging. Usage and trends of in-vehicle networking protocols will be presented and categorized. The past few years have seen a large growth in the number and type of communication buses used in automobiles, trucks, construction equipment, and military, among others. Development continues even into boating and recreation vehicles. Areas for discussion will include SAE Class A, B, C, Diagnostics, SafetyBus, Mobile Media, Wireless, and X-by-Wire. All existing mainstream vehicular multiplex protocols (approximately 40) are categorized using the SAE convention as well as categories previously proposed by this author. Top contenders will be pointed out along with a discussion of the protocol in the best position to become the industry standard in each category.

The current study focused on the effects B20 fuel (20% soybean-based biodiesel) and SCR entrance shapes on a light-duty, high-speed, 2.8L common-rail 4-cylinder diesel engine, at different exhaust temperatures. The results indicate that B20 has less deNOX efficiency at low temperature than ULSD, and that N₂O emission need to be characterized as well as NH₃ slip. If a mixer and enough mixing length are used, longer divergence section does not improve the deNOX efficiency significantly under the speed ranges tested.

In today's dynamic automotive environment, reducing the lead-time to introduce new product technologies to the market place can be a key competitive advantage. Employing proactive risk reduction techniques to define key product and process relationships is essential to enhance the production worthiness of a design while it is still in the advanced development phase of the program. This paper describes how Delphi Powertrain Systems applied the Shainin proactive risk reduction methodology in advanced product development to focus resources on understanding and mitigating the risk associated with the development of a new Delphi ammonia sensor. Organizational and technical strategies to accelerate profound knowledge capture, along with corresponding test results, are presented and discussed.

This paper identifies a select method for performing cylinder imbalance measurement, correction and diagnosis. The impetus is to address new U.S. Federal regulations that require the detection of excessive cylinder air-fuel ratio (AFR) imbalance, and doing so requires the foundational ability to measure and preferably remove cylinder imbalance via active closed-loop control. This function is called Individual Cylinder Fuel Control (ICFC). ICFC starts by extracting cylinder-imbalance information from the front oxygen sensor, and that information comes in the form a of continuous data stream. That stream is then parsed to create virtual sensors- one for each cylinder. Each virtual sensor acts as an imbalance or error signal which ICFC uses to correct and learn via feedback and feed-forward control for each cylinder. The cylinder imbalance diagnostic is enabled by the presence of ICFC.

Modern automatic transmissions use various methods to estimate fluid line pressures in order to improve shift quality and reduce energy losses. These estimations lead to improvements in fuel economy, customer satisfaction and reduced exhaust emissions. The further addition of pressure feedback switches improves operational knowledge by verifying when clutches have received their commanded pressures. Product reliability above the industry standard for transmission pressure switches was developed through the use of multiple FEA platforms combined with advanced design optimization software, robust optimization and Shainin® tools. In this optimized design, ferromagnetic non-contact pressure switches operate by translating fluid pressure into piston motion, isolated by a sealed proprietary diaphragm.

Certain harmonics of angular crankshaft velocity are indicative of engine imbalance induced by cylinder misfire. Application of the Digital Fourier Transformation (DFT) facilitates the production-feasible calculation of a singular index in the frequency domain indicative either of smooth engine operation or misfire. The phase of that particular index with proper interpretation directly points to a misfiring cylinder. The identification of a misfiring pair, either opposing or a non-opposing in the cylinder bank, requires a bit more sophisticated approach since the phase response of the characteristic index in the frequency domain becomes more complex. The method demonstrated here was successfully applied in real time in four-, six-, and eight-cylinder engines, both SI and Diesel, for the On-Board Diagnostic application with reliability exceeding relevant regulatory requirements.

Many exhaust gas analyzers only calculate the Air Fuel Ratio (AF) based on equations derived for the special case of combustion without exhaust gas recirculation (EGR), and therefore do not represent the combustion AF during lean operation with EGR. Equations that are not subject to this limitation will be presented. Using these equations to provide measurements of the combustion AF and total inert EGR is encouraged as they relate more directly to what governs the combustion process.

Wall-wetting due to liquid fuel film motion and fuel droplet impingement on combustion chamber walls is a major source of unburned hydrocarbons (UBHC), and is a concern for oil dilution in PFI engines. An experimental study was carried out to investigate the effects of injection timing, a charge motion control device, and the matching of injector with port geometry, on the “footprints” of liquid fuel inside the combustion chamber during the PFI engine starting process. Using a gasoline-soluble dye and filter paper deployed on the cylinder liner and piston top land surfaces to capture the liquid fuel footprints, the effects of the mixture formation processes on the wetted footprints can be qualitatively and quantitatively examined by comparing the wetted footprint locations and their color intensities. Real-time filming of the development of wetted footprints using a high-speed camera can also show the time history of the fuel wetting process inside an optically accessible engine.

During the past decade, there has been a steady increase in studies addressing rollover crashes and injuries. Though rollovers are not the most frequent crash type, they are significant with respect to serious injury and interest in rollovers has grown with the introduction of SUVs, vans, and light trucks. A review of Occupant and Vehicle Responses in Rollovers examines relevant conditions for field roll overs, vehicle responses, and occupant kinetics in the vehicle. This book edited by Dr. David C. Viano and Dr. Chantal S. Parenteau includes 62 technical documents covering 15 years of rollover crash safety, including field crash statistics, pre- and rollover dynamics, test procedures and dummy responses.