Search Results

The in-flight ice accretion simulations are typically performed using a quasi-steady formulation through a multi-step approach. As the ice grows, the geometry changes, and an adaptation of the fluid volume mesh used by the airflow and droplet-trajectory solver is required. Re-meshing or mesh deformation are generally employed to do that. The geometries formed are often complex ice shapes increasing the difficulty of the re-meshing process, especially in three-dimensional simulations. Consequently, difficulties are encountered when trying to automate the process. Contrary to the usual body-fitted mesh approach, the use of immersed boundary methods (IBMs) allows solving, or greatly reducing, this problem by removing the mesh update, facilitating the global automation of the simulation. In the following paper, an approach to perform the airflow and droplet trajectory calculations for three-dimensional simulations is presented. This framework utilizes only immersed boundary methods.

The present paper deals with the accretion of supercooled large droplets (SLD) at high velocity on wall. A visualization technique of the accretion of ice is used to measure and characterize the thickness of ice during the accretion phenomenon. Influences of air velocity, air temperature, drop size, impact angle and altitude were studied. The experiments are conducted in the ONERA icing wind tunnel, which allows to reach regimes close to realistic conditions for aircrafts (i.e. high velocity: → 190 m/s and altitude: → 11 500 m).

Numerical tools for 3D in-flight icing simulations are not straightforward to automate when seeking robustness and quality of the results. Difficulties arise from the geometry and mesh updates which need to be treated with care to avoid folding of the geometry, negative volumes or poor mesh quality. This paper aims at solving the mesh update issue by avoiding the re-meshing of the iced geometry. An immersed boundary method (here, penalization) is applied to a 2D ice accretion suite for multi-step icing simulations. The suggested approach starts from a standard body-fitted mesh, thus keeping the same solution for the first icing layer. Then, instead of updating the mesh, a penalization method is applied including: the detection of the immersed boundary, the penalization of the volume solvers to impose the boundary condition and the extraction of the surface data from the field solution.

This paper proposes an experimental investigation of fast impinging large droplets in non-icing conditions. Two main aspects of the impact event are analyzed and discussed: the impact dynamics as a function of the surface nature and the deposition rate of the liquid on the impingement surface for various conditions. The data has been recorded and characterized at ambient pressure and a temperature of the air between 5 and 10°C using a vertical wind/droplet tunnel. To avoid the droplets evaporation the relative humidity was controlled. The morphology of impact was studied by backlighted imagery and quantitative results were obtained by image analysis. The deposition rate was obtained weighting the water accumulated on the impingement plate. Examination of splashing events images obtained on a clean surface and on blotter paper shows important differences in terms of secondary drop generation.

Icing is a major hazard for aviation safety. Over the last decades an additional risk has been identified when flying in clouds with high concentrations of ice-crystals where ice accretion may occur on warm parts of the engine core, resulting in engine incidents such as loss of engine thrust, strong vibrations, blade damage, or even the inability to restart engines. Performing physical engine tests in icing wind tunnels is extremely challenging, therefore, the need for numerical simulation tools able to accurately predict ICI (Ice Crystal Icing) is urgent and paramount for the aeronautics industry, especially regarding the development of new generation engines (UHBR = Ultra High Bypass Ratio, CROR = Counter rotating Open Rotor, ATP = Advanced Turboprop) for which analysis methods largely based on previous engines experience may be less and less applicable. The European research project MUSIC-haic has been conceived to fill this gap and has started in September 2018.

The aim of this work is to develop a semi-empirical model for erosion phenomena under ice crystal condition, which is one of the major phenomena for ice crystal accretion. Such a model would be able to calculate the erosion rate caused by impinging ice crystals on accreted ice layer. This model is based on Finnie [1] and Bitter [2] [3] solid/solid collision theory which assumes that metal erosion due to sand impingement is driven by two phenomena: cutting wear and deformation wear. These two phenomena are strongly dependent on the particle density, velocity and shape, as well as on the surface physical properties such as Young modulus, Poisson ratio, surface yield strength and hardness. Moreover, cutting wear is mostly driven by tangential velocity and is more effective for ductile eroded body, whereas deformation wear is driven by normal velocity and is more effective for brittle eroded body.

The seventh European Framework Program (FP7) “Personal Plane” project (PPlane) aims at developing system ideas to enable personal air transport in the long term (2030 and beyond). Such a system will avoid the ever increasing congestion on European roads and offer an alternative to the current conventional transport system across Europe, in particular in those states that still have poor highway and railway networks. The preliminary assumption made in the PPlane project is that automatisms should be developed to enable a “regular Joe” to use a personal aircraft, in various weather conditions, without any command and control difficulties, using a “push button” navigation interface. An on-board automatic system will take care of the complex issues of integration into the airspace (other sky users, class of airspace, Special Use Airspace…), navigation and emergency management.

The ACARE 2020 vision for commercial transport aircraft targets a 50% reduction per passenger kilometer in fuel consumption and CO2 emissions, with a 20-25% reduction to be achieved through airframe improvements. This step change in performance is dependent on the successful integration and down-selection of breakthrough technologies at early stage of aircraft development process, supported by advanced multidisciplinary design capabilities. Conceptual design capabilities, integrating more disciplines are routinely used at Future Project Office. The challenge considered here is to transition smoothly from conceptual to preliminary design whilst maintaining a true multidisciplinary approach. The design space must be progressively constrained, whilst at the same time increasing the level of modelling fidelity and keeping as many design options open for as long as possible.

Model Based Safety techniques have been developed for a number of years, though the models have not been customised to help address the safety considerations/ actions at each refinement level. The work performed in the MISSA Project looked at defining the content of “safety models” for each of the refinement levels. A modelling approach has been defined that provides support for the initial functional hazard analysis, then for the systems architectural definition level and finally for the systems implementation level. The Aircraft functional model is used to apportion qualitative and quantitative requirements, the systems architectural level is used to perform a preliminary systems safety analysis to demonstrate that a system architecture can satisfy qualitative and quantitative requirements.

Within the European Integrated Project NACRE (New Aircraft Concept REsearch) led by Airbus, a team of research centers and universities developed a multidisciplinary flying testbed called IEP (Innovative Evaluation Platform). Under the form of a dynamically scaled model of a future civil transport aircraft, its role is to assist engineers during the assessment of flight dynamics characteristics and noise reduction capabilities. After the feasibility study during which potential scientific and economical benefits of such new test facility have been identified, the team decided to design and manufacture the IEP. Because of the dual aspect of the system (it is a flying unmanned aerial vehicle and a test facility), an extensive requirement analysis has been carried out by the partners in order to identify the necessary operational modes and their associated navigation and control strategies.

Recent aircraft incidents and accidents have highlighted the existence of icing cloud characteristics beyond the actual certification envelope defined by the JAR/FAR Appendix C, which accounts for an icing envelope comprising water droplets up to a diameter of 50 μm. The main concern is the presence of SLD (Supercooled Large Droplets), with droplet diameters well beyond 50 microns. In a previous European-funded project, EURICE, in-flight icing conditions and theoretical studies were performed to demonstrate the existence of SLD and to help characterize SLD clouds. Within the EXTICE project the problem of SLD simulation is addressed with both numerical and experimental tools is being addressed. In this paper the objectives and main achievements of the EXTICE project will be described.

The main purpose of the experiments described here is the analysis of the mechanisms of radome protection with lightning diverters of various types and sizes. A high voltage arrangement and associated diagnostics have been implemented to perform a quantitative study of the inception and propagation mechanisms of the corona and leader discharges that precede the final breakdown. It is shown that ambient humidity plays a significant role on the discharge process and that the nature of the discharge initiated from the strip is very different depending on the strip type. Segmented strips are more likely to allow energetic discharges to propagate from an internal antenna leading to radome puncture.

This paper presents a work carried out within the FULMEN lightning-on-aircraft oriented European project. It is the second part of the general presentation on the analysis of EM environment inside the aircraft. Therefore, it focuses on numerical calculations of voltage and current transfer functions on the ports of the same prototype wiring harness installed in several aircraft structures. The calculations have been carried out with the cable network CRIPTE code and rely on 3D field calculations performed by Ericsson Saab Avionics. The link between the cable code and the 3D code is achieved through the component of the incident electric field tangent to the running path of the wiring.