Search Results

The application of polyalkylene glycol (PAG) as a base stock for engine oil formulation has been explored for substantial fuel economy gain over traditional formulations with mineral oils. Various PAG chemistries were explored depending on feed stock material used for manufacturing. All formulations except one have the same additive package. The friction performance of these oils was evaluated in a motored single cylinder engine with current production engine hardware in the temperature range 40°C-120°C and in the speed range of 500 RPM-2500 RPM. PAG formulations showed up to 50% friction reduction over GF-5 SAE 5W-20 oil depending on temperature, speed, and oil chemistry. Friction evaluation in a motored I-4 engine showed up to 11% friction reduction in the temperature range 40°C-100°C over GF-5 oil. The paper will share results on ASTM Sequence VID fuel economy, Sequence IVA wear, and Sequence VG sludge and varnish tests. Chassis roll fuel economy data will also be shared.

A new test methodology has been developed to quantify the performance of vehicle cavity fillers. This test methodology focuses on the vehicle Body in White (BIW) and provides a proper test environment for individual cavity fillers. Since the focus of the methodology is BIW, the proper boundary condition is automatically implemented and the results obtained from this test methodology can be utilized for an actual comparison of noise reduction (NR) performance for different cavity fillers. In this study a noise source generator was placed at different locations within the vehicle body to generate the desired noise level. The goal was to realistically simulate wind, tire and the powertrain noise sources at the vehicle level and evaluate the performance of the cavity fillers. By placing several microphones in the vicinity of the A, B, C and D pillars, the noise reduction performances of the individual cavity fillers were obtained.

Field cracking in some instrument panels (IP) manufactured with a competitive grade of polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) material was observed in high temperature/high humidity geographies. OEMs and tier molders are: 1) questioning the thermal and hydrolytic stability of the various suppliers' PC/ABS resins, and 2) converting to grades with advantaged stability. A study was undertaken to compare the thermal and hydrolytic stability of two suppliers' high flow PC/ABS resins. Materials were aged at 90C/95% relative humidity up to 1000 hours. Samples were tested to compare the retention of properties. This paper will discuss the experimental procedures, resulting data, and the common factor in the PC/ABS resins showing the best stability.

It is difficult, if not impossible; to select any single test that will model the expected performance of any hydraulic fluid in a wide range of hydraulic pumps made by many different manufacturers. Increasing pressures often encountered in new hydraulic pump applications compounds this problem. However, some basic assessment of hydraulic fluid performance is necessary for numerous reasons such as: developing an appropriate fluid purchase policy, international standard development, fluid classification and others. Since the now-classic standard tests such as: ASTM D-2882, DIN 51389 and others are simply inadequate for this task and also since the manufacturer, Eaton Inc., no longer manufactures these pumps, it has been necessary to develop an alternative testing strategy [1, 2 and 3]. The Bosch-Rexroth Corporation has developed a high-pressure piston pump test that has been an excellent predictor of hydraulic fluid performance for many years.

For many years the ASTM D2882 test method, using the V-104C Vane pump, served the industry well to evaluate the lubricating properties of hydraulic fluids at low pressures (< 2000 psi). However, at higher pressures in different types of pumps (i.e. piston pumps), this method may not be reliable enough to predict satisfactory lubrication performance in commercial applications. In this paper the V-104C pump will be evaluated in terms of vane contact force and film thickness parameters to assertain the possibility of using a modified bench test to better predict hydraulic fluid performance at higher pressures.

The QUESTRA* Crystalline Polymer product family, based on syndiotactic polystyrene (SPS), has been improved to meet the needs of the automotive connector and light socket applications in a very cost effective manner. In this paper, the attributes of two new SPS formulations, SPS/polyamide (PA) blends and low gas SPS formulations, are compared to existing SPS formulations and competitive resins. It is shown that the SPS/PA blends have significantly improved strength and ductility over existing SPS formulations. This improves the SPS formulation technology to include the full range of strength and ductility options the designer of automotive connectors needs to achieve the terminal retention forces and latch deflection distances necessary for the smaller connectors like the .64 mm terminal systems that the automotive industry is migrating towards.

The challenging economic climate of today is causing many suppliers to develop new and creative ways to improve efficiency and meet the needs of customers without jeopardizing the quality of service and support. The Dow Automotive business group is evaluating a new mechanism for remotely supporting customers' injection molding trials by combining wireless video camera technology and traditional videoconference (VC) capabilities. The Video Response System™ (VRS), from Teleco Video Systems, incorporates a wireless remote camera on a wheeled tripod and a wireless audio connection to allow users to transmit a real-time video and audio signal from anywhere within a location to other sites around the globe. The video and audio signals generated by the VRS system are transmitted to a traditional VC unit in the molding shop which in turn transmits the signals over ISDN lines to an awaiting VC unit.

The trend in the automotive industry to establish higher quality, comfort and safety levels, while at the same time reducing cost and weight, is pushing production techniques, materials and the development cycle to become as efficient as possible. The automotive supplier has to choose from a broad range of fabrication technologies and material alternatives to achieve the highest performance level at the lowest possible cost. This paper outlines the process followed by a multi-functional team to design and develop the interior door panels for the VW Golf, in ABS resin for large scale production. The team effort, headed by the Tier 1 (Sommer Allibert Industrie), with extensive interaction with the OEM, and the support of the material supplier and tool-maker, led to a thin-walled part with integrated mountings, high quality appearance and excellent dimensional stability.

The material data provided by resin suppliers in their product datasheets generally focuses on single point data only and does not include the data useful to the design engineers. Even though the single-point data bears little relevance to the end-use performance of the material and provides very little insight into its behavior, design engineers rely heavily on these data because it is readily available. However, to enhance their confidence in their material selection decisions, they ask for large quantity of data without taking into consideration the cost of data measurement. Today, as resin suppliers struggle to justify the cost of generating all the data requested against the tremendous pressure to reduce their cost, it is important to put the direct costs of material data measurement in perspective.

The major element of contact between the occupant, the vehicle and the road surface is the automobile seat. Flexible polyurethane foams are the material of choice for this application, not only because of the economies offered by large-scale molding operations, but also because the cushioning characteristics of the foam/seat assembly can be adjusted. The automotive original equipment manufacturers (OEM’s) worldwide are looking for optimization of the balance between foam weight and foam specifications, with more emphasis than ever on comfort and durability. This goes with specific requirements for the various foam pads, i.e., front cushion, rear cushion, front backrest and rear backrest. Commercially useful foams can be made from a variety of polyurethane molding chemistries.