Search Results

In modern direct injection gasoline engines, air-fuel mixing has a strong influence on combustion and emission characteristics, which in turn largely depends on in-cylinder fluid motion. However, in-cylinder fluid motion dependent on many engine parameters viz., piston shape, engine speed, intake manifold orientation, compression ratio, fuel injection timing, duration, etc. Among them, piston shape has significant influence on the in-cylinder fluid motion. Therefore, this study aims on evaluating the effect of piston shape on in-cylinder flows in a direct injection engine using CFD. In this study, a single-cylinder, two-valve, four-stroke direct injection engine designed for two-wheeler application in India is considered for the analysis. ‘STAR-CD’ and és-ice’ are used for CFD analysis. Pressure boundary values obtained from measurements in the actual engine are employed. Two piston-shapes viz., flat and bowl types at wide-open-throttle under non-firing conditions are considered.

In order to achieve good fuel spray characteristics, proper placing of the fuel injector in the intake manifold in port fuel injected (PFI) gasoline engines is very crucial. In automotive PFI engines, vehicle layout may be a constraint to mount the fuel injector in best possible location and inclination. In general, PFI engines use straight spray fuel injection. However, if there is a vehicle layout constraint, then inclined fuel spray may be suitable which is not very common. Hence, it is important to understand the effect of fuel spray inclination on fuel spray characteristics. In this study, a CFD analysis has been carried out for the four inclinations of fuel spray and the results are compared. The geometrical modeling of the fuel injector is done using ProE software. It is meshed with polyhedral cells and mesh refinement is done wherever required. Inlet air velocity and exit pressure of intake pipe at wide-open-throttle conditions are used as boundary conditions.