Search Results

There is an ongoing interest in identifying new biodegradable hydraulic fluid compositions that may be used as alternatives to mineral oil in many hydraulic applications such as mobile off-highway equipment. To date, many basestocks have been proposed including: vegetable oils, polyol esters, diesters, synthetic hydrocarbons and others. One basestock is gaining interest as alternative, biodegradable, fire-resistant hydraulic fluid; anhydrous poly(alkylene glycol) (PAG) fluids. However, the use of these fluids is not new; they are simply being rediscovered. The objective of this paper is to provide an overview of the discovery and development of anhydrous PAGs as hydraulic fluids. This discussion will include: an overview of PAG chemistry, properties and hydraulic pump performance.

In many situations, the root cause of a particular failure may be determined based on the observation of a single part, or perhaps a photograph, taken from the failed system. However, when failure analysis is conducted on the complete component, a different result often emerges. Such is the case described here for a piston pump that was operating on an anhydrous poly(alkylene glycol) - PAG at high pressure. Initial observation suggested the fluid was the root cause of the failure. However, when failure analysis was properly applied, it was learned that the root cause of the failure was due to mechanical failure caused by the motor-to-pump coupling. This analysis procedure is presented as a case history in this report.

With increasing interest in more biodegradable and fire-resistant hydraulic fluids and with the availability of water-glycol hydraulic fluids suitable for high-pressure hydraulic pump operation, there is increasing interest in the conversion of mineral oil hydraulic systems to these alternative fluids. In this paper, the proper conversion procedures and troubleshooting of some common causes of hydraulic failures for the conversion of mineral oil hydraulic fluids to a water-glycol will be reviewed.

Hydraulic piston pump failures may be related to either hardware or fluid problems. In some cases, apparent hardware failures have been traced to various fluid problems. In this paper, selected examples of pump failures will be provided to illustrate some common modes of axial piston pump failures. In most cases, these will represent actual failures including: misalignment, insufficient fluid lubrication, particle contamination, brinelling, corrosion, and cavitation. Various examples of these and other pump failure modes are provided.

There are numerous fluid-related performance concerns when hydraulic fluids are being qualified for use. These concerns are especially important when non-mineral oil derived hydraulic fluids are being qualified for use in unusual and critical applications. In this paper, a number of performance-related fluid deficiencies that may be encountered in use will be described.

Cavitation erosion is one of the most important causes of loss of hydraulic pump efficiency, wear and even failure. Although cavitation process is often understood, there is typically little understanding of the joint role of the hydraulic fluid, which is a component of the system, and the operation of the hydraulic pump. In this paper, an overview is provided that describes the fluid properties that most impact on cavitation damage, the cavitation process within the pump and components and the use of computer simulation to prove improved designs that minimize hydraulic cavitation when various types of fluids are used.

There is an ongoing interest in biodegradable hydraulic fluids. Biodegradable fluids are often considered to include only vegetable oils, polyol esters and diester base stocks. However, other fluid base stocks including highly refined mineral oils, poly(alpha olefins) and fire-resistant fluids such as water-glycol hydraulic fluids are also biodegradable fluid alternatives. This paper will provide an overview of the international literature on biodegradable fluids, various international testing protocol, fluid base stocks, effect of oxidative stability, material compatibility and pump performance.

Proper hydraulic pump inlet pressure conditions are critical for proper operation of hydraulic systems. This is especially true when water-containing hydraulic fluids are used as direct replacements for mineral oil or synthetic esters. In this paper, the importance of proper inlet conditions on hydraulic system performance will be reviewed. Also provided are various reservoir design recommendations that should be followed when using water-containing hydraulic fluids such as water-glycol (HFC) hydraulic fluids.

Currently, the industry standard pump test which is used to evaluate the lubricating performance of hydraulic fluids is ASTM D-2882 [1,2]. This test, and others, utilizes the Vickers V-104 vane pump [3]. Although ASTM D-2882 has been an industry standard for many years, it does not provide the necessary correlation required for prediction of the lubricating properties of a hydraulic fluid in various piston pump operations. The objective of this paper is to detail the recently proposed Rexroth Piston Pump Test which is being proposed as an ASTM standard. A description of the proposed hardware, pump testing strategies and methods of standardized wear determination will be provided.

Cavitation is the dynamic process of gas cavity growth and collapse in a liquid. These cavities are due to the presence of dissolved gases or volatile liquids and they are formed at the point where the pressure is less than the saturation pressure of the gas (gaseous cavitation) or vapor pressure (vaporous cavitation). In this paper, various hydraulic system design factors and fluid properties affecting the cavitation process, and bubble collapse mechanisms will be discussed. In-situ generation of cavitation, examination of the cavitation process in model hydraulic systems, material effects and test methods will be reviewed.