Refine Your Search

Date

Date

Topic

Topic

Ferrous metals Metallurgy Pressure Sensors and actuators A-6 Aerospace Actuation, Control and Fluid Power Systems Parts and Components

Search Results

Viewing 1 to 20 of 31
12Next >Last >>
Sort by published
Standard

Handbook of Hydraulic Metric Calculations
2021-05-18
CURRENT
AIR1657C
This SAE Aerospace Information Report (AIR) provides details of how to perform hydraulic system calculations using equations that incorporate the metric International System of Units (SI).
Standard

Aerospace Hydraulics and Actuation Lessons Learned
2017-02-09
CURRENT
AIR4543C
This SAE Aerospace Information Report (AIR) contains Lessons Learned from aerospace actuation, control and fluid power systems technologies. The lessons were prepared by engineers from the aerospace industry and government services as part of SAE Committee A-6, Aerospace Fluid Power, Actuation, and Control Technologies, and were presented to the A-6 during meetings held from 1989 through 1999. The document is organized into five sections covering systems, actuation, hydromechanical components, electrical components and miscellaneous, each further divided into subsections. The lessons are presented in a concise format of Problem, Issue, Solution and Lesson Learned, often with accompanying descriptive diagrams and illustrations for clarity and understanding.
Standard

Determination of Hydraulic Pressure Drop
2013-10-04
CURRENT
ARP24E
This SAE Aerospace Recommended Practice (ARP) provides analytical and test methods for determining pressure drop in fluid systems such as hydraulic, fluid, oil, and coolant used in aerospace vehicles. Determining pressure drop by analytical and test results will be discussed.
Standard

Aerospace Hydraulic and Pneumatic Specifications, Standards, Recommended Practices, and Information Reports
2012-08-02
CURRENT
AIR737F
This SAE Aerospace Information Report (AIR) lists military and industry specifications, standards, recommended practices and information reports used in the design of aerospace hydraulic and pneumatic components and systems. It is intended as a supplement to specifications ARP4752, AS5440, and MIL-P-5518. Only those hardware standards specifically applicable to hydraulic or pneumatic components or systems are listed in this document.
Standard

Graphic Symbols for Aircraft Hydraulic and Pneumatic Systems
2011-12-12
HISTORICAL
AS1290B
This Aerospace Standard (AS) presents a system of graphic symbols intended primarily for usage in hydraulic and pneumatic system schematic diagrams for all types of aircraft. It is also considered suitable for marine vehicles and other applications and for ancillary documents where schematics are required. Individual graphic symbols shown herein are also considered suitable for use in conjunction with other types of symbols. This AS is intended to promote industry-wide acceptance and understanding of uniform standards and employs, where possible, symbols which are internationally recognized.
Standard

AEROSPACE HYDRAULIC AND PNEUMATIC SPECIFICATIONS AND STANDARDS
2011-08-10
HISTORICAL
AIR737D
This report lists military and industry specifications and standards which are used in aerospace hydraulic and pneumatic systems. It is intended as a supplement to specifications MIL-H-5440 and MIL-P-5518. Only those hardware standards which have been specifically designed for hydraulic or pneumatic use are listed. Revisions and amendments which are current for these specifications and standards are not listed. Order of procedure for the selection of specifications and standards is covered by MIL-STD-970.
Standard

Aerospace Hydraulics and Actuation Lessons Learned
2010-11-18
HISTORICAL
AIR4543B
This SAE Aerospace Information Report (AIR) contains Lessons Learned from aerospace actuation, control and fluid power systems technologies. The lessons were prepared by engineers from the aerospace industry and government services as part of SAE Committee A-6, Aerospace Fluid Power, Actuation, and Control Technologies, and were presented to the A-6 during meetings held from 1989 through 1999. The document is organized into five sections covering systems, actuation, hydromechanical components, electrical components and miscellaneous, each further divided into subsections. The lessons are presented in a concise format of Problem, Issue, Solution and Lesson Learned, often with accompanying descriptive diagrams and illustrations for clarity and understanding.
Standard

AEROSPACE HYDRAULIC AND PNEUMATIC SPECIFICATIONS, STANDARDS, RECOMMENDED PRACTICES, AND INFORMATION REPORTS
2008-11-17
HISTORICAL
AIR737E
This SAE Aerospace Information Report (AIR) lists military and industry specifications, standards, recommended practices and information reports used in the design of aerospace hydraulic and pneumatic components and systems. It is intended as a supplement to specifications ARP4752, MIL-H-5440, and MIL-P-5518. Only those hardware standards specifically applicable to hydraulic or pneumatic components or systems are listed in this document.
Standard

Determination of Hydraulic Pressure Drop
2005-06-07
HISTORICAL
ARP24D
This SAE Aerospace Recommended Practice (ARP) provides analytical and test methods for determining pressure drop in fluid systems such as hydraulic, fluid, oil, and coolant used in aerospace vehicles. Determining pressure drop by analytical and test results will be discussed.
Standard

Handbook of Hydraulic Metric Calculations
2003-09-25
HISTORICAL
AIR1657B
Metric (SI and CGS) and English units related to aerospace hydraulics are summarized. Conversion of units is provided as required. Fundamental fluid properties and physical laws governing fluid motion, pressure and other significant aspects are described in SI metric units. Examples of application to typical aerospace hydraulic system components are demonstrated.
Standard

Impulse Testing of Aerospace Hydraulic Actuators, Valves, Pressure Containers, and Similar Fluid System Components
2003-02-05
HISTORICAL
ARP1383B
This SAE Aerospace Recommended Practice (ARP) establishes the minimum requirements and procedures for impulse testing of aerospace hydraulic actuators, valves, pressure containers, and similar fluid system components, for use in aerospace hydraulic systems; for exceptions, see paragraph 9.1. This ARP also refers to standard impulse test equipment, which may be used in conducting these impulse tests.
Standard

Determination of Hydraulic Pressure Drop
2000-11-01
HISTORICAL
ARP24C
This ARP is intended to be a guide for determining pressure drop in fluid systems such as hydraulic, fuel, oil, and coolant used in aerospace vehicles. Determining pressure drop by analytical and test methods will be discussed.
Standard

Aerospace Hydraulics and Actuation Lessons Learned
2000-06-01
HISTORICAL
AIR4543A
This SAE Aerospace Information Report (AIR) contains technical information on aerospace hydraulic, actuation and support equipment technologies lessons learned. The lessons learned were prepared by system designers and hydraulic engineers from the aerospace industry and government services as part of SAE Committee A-6, Aerospace Fluid Power, Actuation, and Control Technologies, and were presented at eight Lessons Learned Symposia from 1989 through 1999 held during A-6 Committee meetings. The technical topics represent many years of design experience in hydraulics and actuation, which it is felt is a resource for learning that should be documented and made available to current and future aerospace hydraulic engineers and designers. The document is organized into two sections: systems and components with further categories within the components section.
Standard

HANDBOOK OF HYDRAULIC METRIC CALCULATIONS
1994-12-01
HISTORICAL
AIR1657A
Metric (SI and CGS) and English units related to aerospace hydraulics are summarized. Conversion of units is provided as required. Fundamental fluid properties and physical laws governing fluid motion, pressure and other significant aspects are described in SI metric units. Examples of application to typical aerospace hydraulic system components are demonstrated.
Standard

AEROSPACE HYDRAULIC AND PNEUMATIC SPECIFICATIONS AND STANDARDS
1992-07-01
HISTORICAL
AIR737
This report lists military and industry specifications and standards which are used in Aero/Space Hydraulic and Pneumatic Systems. It is intended as a supplement to Specifications MIL-H-5440 and MIL-P-5518. Only those hardware standards which have been specifically designed for hydraulic or pneumatic use are listed. Revisions and amendments which are current for these specifications and standards are not listed.
Standard

AEROSPACE HYDRAULICS AND ACTUATION LESSONS LEARNED
1992-01-13
HISTORICAL
AIR4543
This Aerospace Information Report (AIR) contains technical information on aerospace hydraulic and actuation technologies lessons learned. The lessons learned were prepared by system designers and hydraulic engineers from the aerospace industry and government services as part of SAE Committee A-6, Aerospace Fluid Power, Actuation, and Control Technologies, and were presented at three Lessons Learned Symposia in 1989 and 1990 held during A-6 Committee meetings. The technical topics represent many years of design experience in hydraulics and actuation, which it is felt is a resource for learning that should be documented and made available to current and future aerospace hydraulic engineers and designers. The document is organized into two sections; systems and components, with further categories within the components section.
12Next >Last >>
X