Refine Your Search

Date

Date

Topic

Topic

Chassis Management and Organizations ACBG Plain Bearing Committee Inspections Steel

Search Results

Viewing 1 to 20 of 146
123Next >Last >>
Sort by published
Standard

Bearings, Plain and PTFE Lined, Self-Aligning
2022-02-16
CURRENT
AS8942A
This SAE Aerospace Standard (AS) establishes the requirements for self-aligning, self-lubricating plain spherical bearings incorporating polytetrafluoroethylene (PTFE) in a liner between the ball and the outer race for use in a temperature range of -65 to +250 °F (-54 to +121 °C).
Standard

Bearings, Elastomeric General Specification for
2021-02-11
CURRENT
AS85598
This standard defines general requirements for spherical, radial-journal, conical, and thrust bearings which are of laminated elastomeric construction. These bearings are for use in an environment having a temperature spectrum of -65 to +160 °F while reacting steady state loads in addition to oscillating loads and motions. The operating temperature range of -65 to +160 °F reflects the current temperature range for existing parts, but allows for expansion in the future.
Standard

Rod End Locking Device Selection Criteria
2020-07-01
CURRENT
ARP6910
This ARP discusses common rod end locking devices with recommended applications and some of the advantages and disadvantages of specific configurations. An appendix is included with factors to be considered for selection of positive locking devices and a discussion of safetying devices for rod end assemblies.
Standard

Plain Bearing Lined Inside Diameter Plug Gaging
2019-05-23
CURRENT
ARP5448/9B
This test method establishes a standard procedure for using plug gages to evaluate dimensional conformance of lined inside diameters of bearings. Bearings covered by this test method include sleeve bearings and lined bore spherical bearings. Note that this method gives no indication of true cylindricity.
Standard

Bearings, Plain, Self-Aligning, Self-Lubricating, 300 cpm Oscillation (13 fpm), -65 to +160 °F (-54 to +71 °C), Liners Less Than 0.015 inches
2018-08-23
CURRENT
AS82819
This standard covers the requirements for spherical, self-aligning, self-lubricating, bearings which are for use in the ambient temperature range of -65 to +160 °F (-54 to +71 °C) at high cyclic speeds 300 cpm (13 fpm) for liners with a thickness less than 0.015 inch. The scope of this standard is to provide a liner system qualification procedure for helicopter sliding bearings defined and controlled by source control drawings. Once a liner system is qualified, the source-controlled bearings are further tested under application conditions. Under Department of Defense (DoD) Policies and Procedures, any qualification requirements and associated Qualified Products List (QPLs) are mandatory for DoD contracts. Any materials relating to QPLs have not been adopted by SAE and are not part of this SAE technical document.
Standard

Bearings, Plain, Self-Aligning, Self-Lubricating, 1400 cpm (15 fpm), Oscillation, -65 to +160 °F (-54 to +71 °C)
2018-08-23
CURRENT
AS83819
This standard covers the requirements for spherical, self-aligning, self-lubricating, bearings which are for use in the ambient temperature range of -65 to +160 °F (-54 to +71 °C) at high cyclic speeds 1400 cpm (15 fpm). The scope of this standard is to provide a liner system qualification procedure for helicopter sliding bearings defined and controlled by source control drawings. Once a liner system is qualified, the source-controlled bearings are further tested under application conditions. Under Department of Defense (DoD) Policies and Procedures, any qualification requirements and associated Qualified Products List (QPLs) are mandatory for DoD contracts. Any materials relating to QPLs have not been adopted by SAE and are not part of this SAE technical document.
Standard

Plain Bearing Test Methods
2018-08-23
CURRENT
ARP5448B
This SAE Aerospace Recommended Practice (ARP) establishes methods for testing airframe plain bearings. The purpose of ARP5448 and its associated slash sheets is to document test methods commonly used to evaluate airframe bearings. These test methods may be referenced in specifications, part standards, purchase orders, etc., when the test is deemed appropriate to the intended use of the bearing by the end user of the bearing. These test methods are not intended to encompass every conceivable requirement for an airframe bearing. The end user of the bearing must exercise engineering judgment to determine the most appropriate standard and/or nonstandard tests for the application.
Standard

Plain Bearing Bond Integrity - Peelable Woven Fabric PTFE Liners
2018-08-13
CURRENT
ARP5448/4
This test method outlines a recommended procedure for performing bond integrity tests of bonded peelable woven fabric reinforced polytetrafluoroethylene (PTFE) liners, hereafter referred to within this document as "PTFE liner" or "liner". The data from these tests shall be used to determine if the product meets the "bond integrity" requirements of the applicable specifications.
123Next >Last >>
X