Refine Your Search

Date

Date

Topic

Topic

Identification Assembling AE-5B Aircraft and Engine Fuel and Lubricant Sys Components Pressure Materials properties

Search Results

Viewing 1 to 20 of 21
12Next >Last >>
Sort by published
Standard

Performance Testing of Lubricant Filter Elements Utilized in Aircraft Power and Propulsion Lubrication Systems
2020-11-12
CURRENT
AIR1666C
This SAE Aerospace Information Report (AIR) reviews performance testing parameters for non-cleanable (often referred to as disposable) filter elements utilized in aircraft power and propulsion lubrication systems, including gas turbine engines and auxiliary power units (APUs), propulsion and transmission gear boxes, and constant speed drives and integrated drive generators (IDGs). This document is confined to laboratory testing of filter element performance to qualify the filtration medium and filter element construction as opposed to qualification of the complete filter assembly. The testing discussed here is usually followed by laboratory and on-engine testing of the entire lube filter assembly (including filter element, housing, valving, etc.), which is outside the scope of this AIR.
Standard

Aircraft Fuel System Vapor-Liquid Ratio Parameter
2020-04-29
CURRENT
AIR1326A
The AIR is limited to a presentation of the historical background, the technical rationale which generated the V/L fuel condition interface requirement in specifications between the aircraft fuel delivery system and the aircraft engine fuel system, and limitations in the usage of the V/L concept.
Standard

Aircraft/Engine Fuel Pump Net Positive Suction Pressure Performance Test and Evaluation
2020-04-29
CURRENT
ARP4024
This procedure applies to engine or airframe-mounted fuel pumps. The procedure recommends single-pass operation to minimize changes in fuel properties affecting NPSP capability. An optional method using a recirculation system is also included and may be specified at the discretion of the equipment specification. This procedure defines the recommended test setup, test procedure, data acquisition, and data presentation.
Standard

Measuring Aircraft Gas Turbine Engine Fine Fuel Filter Element Performance
2014-11-20
HISTORICAL
ARP1827C
This SAE Aerospace Recommended Practice (ARP) delineates two complementary filter element performance ratings: (1) dirt capacity, and (2) filtration efficiency, and corresponding test procedures. It is intended for non-cleanable (disposable), fine fuel filter elements used in aviation gas turbine engine fuel systems.
Standard

Multi-Pass Method for Evaluating Filtration Performance of Fine Lube Filter Elements Utilized in Aerospace Power and Propulsion Lubrication Systems
2014-10-08
HISTORICAL
ARP5454B
This SAE Aerospace Recommended Practice (ARP) describes the multi-pass method for evaluating the filtration performance of fine lube filter elements, commonly utilized in aerospace power and propulsion lubrication systems: gas turbine engines, auxiliary power units (APUs), helicopter transmissions, constant speed drives (CSDs), and integrated drive generators (IDGs).
Standard

Performance Testing of Lubricant Filter Elements Utilized in Aircraft Power and Propulsion Lubrication Systems
2014-05-29
HISTORICAL
AIR1666B
This SAE Aerospace Information Report (AIR) reviews performance testing parameters for non-cleanable, often referred to as disposable, filter elements utilized in aircraft power and propulsion lubrication systems, including gas turbine engines and auxiliary power units (APUs), propulsion and transmission gear boxes, and constant speed drives and integrated drive generators (IDGs). This document is confined to laboratory testing of filter element performance to qualify the filtration medium and filter element construction as opposed to qualification of the complete filter assembly. The testing discussed here is usually followed by laboratory and on-engine testing of the entire lube filter assembly (including filter element, housing, valving, etc.), which is outside the scope of this AIR.
Standard

Aircraft Engine Fuel Feed and Transfer Component Pressure Definitions
2013-02-05
HISTORICAL
AIR1749
The information in this document is limited to aircraft engine fuel feed, refueling, and transfer components (reference 2.1). It is assumed that isothermal, liquid fluid conditions exist, herein referred to as fuel. Where a unit of measure is suffixed, this is intended to show a generally associated unit for illustration only and is not an exclusive endorsement of this particular term. Where applicable and allowable it is understood that a referee fluid may be substituted for fuel.
Standard

Measuring Aircraft Gas Turbine Engine Fine Fuel Filter Element Performance
2009-10-30
HISTORICAL
ARP1827B
This SAE Aerospace Recommended Practice (ARP) delineates two complementary filter element performance ratings: (1) dirt capacity, and (2) filtration efficiency, and corresponding test procedures. It is intended for non-cleanable (disposable), fine fuel filter elements used in aviation gas turbine engine fuel systems.
Standard

Multi-Pass Method for Evaluating Filtration Performance of Fine Lube Filter Elements Utilized in Aerospace Power and Propulsion Lubrication Systems
2008-12-17
HISTORICAL
ARP5454A
This SAE Aerospace Recommended Practice (ARP) describes the multi-pass method for evaluating the filtration performance of fine lube filter elements, commonly utilized in aerospace power and propulsion lubrication systems: gas turbine engines, auxiliary power units (APUs), helicopter transmissions, constant speed drives (CSDs), and integrated drive generators (IDGs).
Standard

Fire Testing of Fluid Handling Components for Aircraft Engines and Aircraft Engine Installations
2007-02-15
CURRENT
AS4273A
This document establishes requirements, test procedures, and acceptance criteria for the fire testing of fluid handling components and materials used in aircraft fluid systems. It is applicable to fluid handling components other than those prescribed by AS1055 (e.g., hoses, tube assemblies, coils, and fittings). It also is applicable to materials, wiring, and components such as reservoirs, valves, gearboxes, pumps, filter assemblies, accumulators, fluid-cooled electrical/electronic components, in-flight fluid system instrumentation, hydromechanical controls, actuators, heat exchangers, and manifolds. These components may be used in fuel, lubrication, hydraulic, or pneumatic systems.
Standard

Multi-Phase Method for Evaluating Filtration Performance of Fine Lube Filter Elements Utilized in Aerospace Power and Propulsion Lubrication Systems
2003-11-19
HISTORICAL
ARP5454
This SAE Aerospace Recommended Practice (ARP) describes the multi-pass method for evaluating the filtration performance of fine lube filter elements, commonly utilized in aerospace power and propulsion lubrication systems: gas turbine engines, auxiliary power units (APUs), helicopter transmissions, constant speed drives (CSDs), and integrated drive generators (IDGs).
Standard

Measuring Aircraft Gas Turbine Engine Fine Fuel Filter Element Performance
2003-05-15
HISTORICAL
ARP1827A
This SAE Aerospace Recommended Practice (ARP) delineates two complementary filter element performance ratings: (1) dirt capacity, and (2) filtration efficiency, and corresponding test procedures. It is intended for non-cleanable (disposable), fine fuel filter elements used in aviation gas turbine engine systems.
Standard

AIRCRAFT FUEL SYSTEM VAPOR-LIQUID RATIO PARAMETER
1974-01-01
HISTORICAL
AIR1326
The AIR is limited to a presentation of the historical background, the technical rationale which generated the V/L fuel condition interface requirement in specifications between the aircraft fuel delivery system and the aircraft engine fuel system, and limitations in the usage of the V/L concept.
12Next >Last >>
X