Refine Your Search

Date

Date

Topic

Topic

Fibers Environmental testing AGE-2 Air Cargo Power and Propulsion

Search Results

Viewing 1 to 20 of 34
12Next >Last >>
Sort by published
Standard

Air Cargo Unit Load Devices – Testing Methods
2022-06-27
WIP
AS36102C
This SAE Aerospace Standard (AS) specifies the testing methods to be used to substantiate performance of air cargo containers, pallets and nets (Unit Load Devices) for airworthiness approval in accordance with NAS 3610 or AS36100.
Standard

Fire Containment Cover - Design, Performance, and Testing Requirements
2021-12-13
CURRENT
AS6453A
This SAE Aerospace Standard (AS) specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: a In those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b On a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.
Standard

Fire Resistant Container Design, Performance, and Testing Requirements
2020-10-27
CURRENT
AS8992
This Aerospace Standard (AS) specifies the minimum design and performance criteria and testing methods of passive fire resistant containers (FRCs) used either: a In those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b On a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.
Standard

General Requirements for Powered Drive Units (PDUs) in Aircraft Cargo Systems
2019-10-02
CURRENT
AIR4165B
This SAE Aerospace Information Report (AIR) is intended to assist the user (aircraft manufacturer/airline) in the following areas: a In the decision of whether or not to plan for the installation of a powered drive system in the cargo loading system (CLS) during the definition of the aircraft on-board cargo loading system. b If a powered drive system is decided upon, to provide general requirements to be considered during the preparation of component specifications for the powered drive units (PDUs) to be used. This provides a selection of criteria in order to obtain an optimum PDU for the application considered.
Standard

Environmental Degradation of Textiles
2019-04-24
CURRENT
AIR1490C
Since cargo restraint devices made with textiles should have a predictable service life, there should be data available so that predictions can be made. This document compiles available information on textiles of the types used in air cargo restraint devices and reviews the degradation characteristics of each. Textiles are used primarily in cargo restraint nets on air cargo pallets and nonstructural containers, restraint nets installed in cargo aircraft, and similar applications.
Standard

Environmental Degradation of Composite Materials
2018-10-18
CURRENT
ARP6287
In accordance with § 4.11 of AS36100, materials used in the construction of pallets, nets, and containers shall take into account the effects of environmental conditions, such as temperature, humidity, and UV degradation, expected in service. In accordance with (E)TSO-C90, the applicant shall consider environmental degradation due to aging, ultra-violet (UV) exposure, weathering, etc., for any materials used in the construction of pallets, nets, and containers. The purpose of this Aerospace Recommended Practice (ARP) is to provide guidelines for the basic requirements to be considered regarding environmental degradation effects when qualifying composite materials in the design to fulfill the (E)TSO-C90 Minimum Performance Standard. Material qualification is the verifying of a materials attributes and characterizations, which are typically determined through testing.
Standard

Certified Containers for Lower Deck Compartments
2018-10-18
CURRENT
AS5896
This SAE Aerospace Standard (AS) covers the design, fabrication, performance, and testing requirements for general-purpose, base-restrained, containers requiring airworthiness approval for installation/use in aircraft lower deck compartments. See 10.1 and 10.2.
Standard

Shipping Caps, Covers and Plugs
2017-11-06
CURRENT
ARP5862
The primary purpose of the shipping closure is to protect the aircraft parts or system from damage and foreign material ingress/egress (e.g., dust, dirt or other contaminants) during transport and storage. Shipping closures are not airworthy items. Therefore, their usage is defined as preventative for the parts to be protected as opposed to operational. Military and commercial customer requirements for the prevention of damage or contamination to stored parts are generally limited to the generic instructions “all openings should be sufficiently covered to prevent the entrance of dust, dirt, moisture or other foreign contaminants”. This recommended practice outlines basic minimum parameters for suggested item construction and usage. Additionally, this recommended practice provides instruction on how to apply these closures to various openings.
Standard

Stands, Shipping and Storage, Aircraft Engines, Reusable
2017-10-25
WIP
ARP4898A
This SAE Aerospace Recommended Practice (ARP) recommends design and test criteria for reusable shipping and storage stands for aircraft engines. An optional hard cover (enclosure) is also specified.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods
2017-05-08
CURRENT
AS5385D
This SAE Aerospace Standard (AS) aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22250 N (5000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain cargo on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main/upper deck cargo systems and meeting the requirements of NAS 3610 or AS36100, or b non-unitized individual pieces of cargo, or pieces of, cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
Standard

Environmental Degradation of Textiles
2013-08-12
HISTORICAL
AIR1490B
Since the ULD device containing textiles should have a predictable service life, there should be data available so that predictions can be made. This document compiles available information on textiles of the types used in air cargo ULD devices and reviews the degradation characteristics of each. Textiles are used primarily in cargo restraint nets on air cargo pallets and nonstructural containers, restraint nets installed in cargo aircraft, and similar applications.
Standard

Fire Containment Cover - Design, Performance, and Testing Requirements
2013-08-06
HISTORICAL
AS6453
This SAE Aerospace Standard (AS), identical to ISO 14186, specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: a in those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b on a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.
Standard

Universal Turnover Build-Up Stand for Small Propulsion Units Requiring Vertical Assembly
2012-12-05
CURRENT
ARP863B
This recommended practice covers a stand that may be used for assembly, disassembly, and maintenance. The stand incorporates the following design criteria: complete interchangeability of any and all components, collapsible frame construction, envelope dimensions (marked with an asterisk on the attached drawings), attachment pad configuration, and gearbox and caster specifications.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods
2012-11-26
HISTORICAL
AS5385C
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22,250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main/upper deck cargo systems and meeting the requirements of NAS 3610 or AS36100, or b non-unitized individual pieces of cargo, or pieces of, cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
Standard

General Requirements for Powered Drive Units (PDUs) in Aircraft Cargo Systems
2012-11-01
HISTORICAL
AIR4165A
This SAE Aerospace Information Report (AIR) is intended to assist the user (aircraft manufacturer/airline) in the following areas: a In the decision of whether or not to plan for the installation of a powered drive system in the cargo loading system (CLS) during the definition of the aircraft on-board cargo loading system. b If a powered drive system is decided upon, to provide general requirements to be considered during the preparation of component specifications for the powered drive units (PDUs) to be used. This provides a selection of criteria in order to obtain an optimum PDU for the application considered.
12Next >Last >>
X