Refine Your Search

Search Results

Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

2018-10-16
WIP
AS36100C
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Cargo Restraint Straps – Utilization Guidelines

2017-11-13
CURRENT
ARP5595B
This Aerospace Recommended Practice aims at providing general utilization guidelines and calculation methods adequate to guarantee the effectiveness and ultimate load strength of tie-down/lashing arrangements performed to restrain cargo on board civil transport aircraft during flight: a Cargo loaded and tied down onto airworthiness approved air cargo pallets, themselves restrained into aircraft lower deck, main deck or upper deck cargo systems meeting the restraint requirements of air cargo pallets approved in accordance with NAS 3610 or AS36100, or b Additional tie-down on aircraft structure when necessitated by pallet maximum gross mass or centre of gravity location, or c Individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck, main deck or upper deck containerized cargo compartments of an aircraft, or d Individual pieces of load loaded in non-containerized (bulk loaded) baggage or cargo compartments.
Standard

Air Cargo Unit Load Devices – Testing Methods

2017-03-14
CURRENT
AS36102B
This SAE Aerospace Standard (AS) specifies the testing methods to be used to substantiate performance of air cargo containers, pallets and nets (Unit Load Devices) for airworthiness approval in accordance with NAS 3610 or AS36100.
Standard

Cargo Stopper Devices

2017-02-15
CURRENT
AS6554A
The purpose of this SAE Aerospace Standard (AS) is to standardize the basic design, performance, and testing requirements for “Cargo Stoppers” cargo tie-down accessories to be used in conjunction with approved restraint straps meeting AS5385C (TSO C-172) requirements.
Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

2016-06-06
CURRENT
AS36100B
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Pallet Extensions

2016-02-24
CURRENT
AS1988B
This SAE Aerospace Standard (AS) establishes the dimensional and operational requirements for pallet extension devices. It provides support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved in conjunction with pallets meeting the requirements of AS1491 plus additional pallet sizes usable with extensions.
Standard

Aircraft Cargo Door Opening/Sill Details for Ground Support Equipment Interface

2014-09-30
CURRENT
AIR1673B
Manufacturers/designers of all aircraft equipped with a pallet/container capability have provided a means of linking the ground loaders/elevators with the aircraft sill for the smoother transfer of pallets and containers into or out of the aircraft holds. Use of the aircraft attachment points may be used as a means of averting damage to the aircraft door frames and other important parts. Latch-on guarantees fore and aft and vertical alignment of the loader bed with the aircraft doorway, when used in conjunction with the appropriate ground equipment. This SAE Aerospace Information Report (AIR) has been prepared by SAE Subcommittee AGE-2A to present a review of the current range of aircraft attachment points on wide body aircraft and those narrow body aircraft with a ULD cargo capability. Airline operators, who utilized these facilities, have been faced with a growing number of adaptor bars necessary to suit each type of aircraft and door position.
Standard

Fittings, Cargo Tiedown, Aircraft

2012-10-15
CURRENT
AS7092B
This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.
Standard

Cargo Stopper Devices

2011-07-06
HISTORICAL
AS6554
The purpose of this SAE Aerospace Standard (AS) is to standardize the basic design, performance and testing requirements for “Cargo Stoppers” cargo tie-down accessories to be used in conjunction with approved tie-down straps meeting AS5385C (TSO C-172) requirements.
Standard

Cargo Stopper Devices

2009-05-05
HISTORICAL
ARP6022
The purpose of this SAE Aerospace Recommended Practice (ARP) is to standardize the basic design, performance and testing requirements for “Cargo Stoppers” cargo tie-down accessories to be used in conjunction with approved tie-down straps meeting AS5385C requirements.
Standard

Air Cargo Pallets and Nets Compatibility

2007-10-12
CURRENT
ARP36104A
This SAE Aerospace Recommended Practice (ARP) provides the criteria to be applied in order to determine compatibility with each other of an air cargo pallet and air cargo pallet net airworthiness approved under either NAS 3610 [TSO C90c] or AS36100A [TSO pending] performance and testing requirements.
Standard

Fittings, Cargo Tiedown, Aircraft

2006-04-27
HISTORICAL
AS7092A
This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.
Standard

Air Cargo Unit Load Devices – Performance Requirements and Test Parameters

2006-04-27
HISTORICAL
AS36100A
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint and occupant protection requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Pallets and Nets Compatibility

2005-11-04
HISTORICAL
ARP36104
This SAE Aerospace Recommended Practice (ARP) provides the criteria to be applied in order to determine compatibility with each other of an air cargo pallet and an air cargo pallet net airworthiness approved under either NAS 3610 [TSO C90c] or AS36100 [TSO pending] performance and testing requirements.
Standard

Air Cargo Pallet Extenders

2004-04-26
HISTORICAL
AS1988A
This SAE Aerospace Standard (AS) establishes the dimensional and operational requirements for pallet extension devices. It provides support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved in conjunction with pallets meeting the requirements of AS1491 plus additional pallet sizes usable with extenders.
Standard

Aircraft Cargo Door Opening/Sill Details for Ground Support Equipment Interface

2002-04-16
HISTORICAL
AIR1673A
Manufacturers/designers of all aircraft equipped with a pallet/container capability have provided a means of linking the ground loaders/elevators with the aircraft sill for the smoother transfer of pallets and containers into or out of the aircraft holds. Use of the aircraft attachment points may be used as a means of averting damage to the aircraft door frames and other important parts. Latch-on guarantees fore and aft and vertical alignment of the loader bed with the aircraft doorway, when used in conjunction with the appropriate ground equipment. This SAE Aerospace Information Report (AIR) has been prepared by SAE Subcommittee AGE-2A to present a review of the current range of aircraft attachment points on wide body aircraft and those narrow body aircraft with a ULD cargo capability. Airline operators, who utilized these facilities, have been faced with a growing number of adaptor bars necessary to suit each type of aircraft and door position.
Standard

Auto Transport Unit Load Device

2002-03-22
HISTORICAL
ARP1554C
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
X