Standard
Pressure Testing, Hydraulic Pressure as Specified
2023-05-17
AMS2615G
This specification provides requirements and procedures for hydraulic-pressure leak testing of parts.
Search Results
Standard
In-Process Welding of Castings
2022-09-15
WIP
AMS2694D
This specification defines the requirements for in-process correction of foundry discontinuities by manual welding of castings.
Standard
Rotary Flap Peening of Metal Parts
2022-04-14
AMS2590C
This specification covers procedures and requirements for peening of metal parts with portable, bonded-shot, rotary flap assemblies in accordance with AS2592. The principles of rotary flap peening are similar to conventional shot peening, except conversion of arc height values using the magnetic test strip holder is required for intensity determination.
Standard
Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
2022-03-29
AMS2451/4E
This specification establishes the requirements for brush plating of cadmium by electrodeposition.
Standard
Carburizing and Heat Treatment of Carburizing Grade Steel Parts
2021-09-15
AMS2759/7E
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS2759, establishes the requirements and procedures for three classes of gas, vacuum, liquid, and low pressure (LPC) carburizing and related heat treatment of parts fabricated from carburizing grade steels. Parts made from steels other than those specified in the detail specifications may be heat treated in accordance with the applicable requirements using processing temperatures, times, and other parameters recommended by the material producer unless otherwise specified by the purchaser. This specification does not cover pack carburizing.
Standard
Petroleum Base Instrument Bearing Lubricant Viscosity 15
2019-11-04
AMS3055B
This specification covers the requirements for a refined paraffinic petroleum-base lubricant.
Standard
Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
2019-10-31
AMS2488E
This specification establishes the engineering requirements for producing an anodic coating on titanium and titanium alloys and the properties of the coating.
Standard
Graphite Coating, Thin Lubricating Film Impingement Applied
2019-10-10
AMS2525E
This specification covers a coating consisting of finely-powdered graphite in a heat-resistant inorganic binder.
Standard
Flux, Aluminum Welding
2019-08-20
AMS3414F
This specification covers an aluminum welding flux in the form of powder.
Standard
Etch Inspection of High Strength Steel Parts
2019-07-15
AMS2649D
This specification establishes the requirements for etch inspection of steel parts to detect overheating (rehardening or overtempering) caused by abusive machining or grinding, or to detect localized discontinuous carburization.
Standard
Superfinishing of HVOF Applied Tungsten Carbide Coatings
2019-07-15
AMS2452
This specification covers requirements for the superfinishing of High Velocity Oxygen/Fuel (HVOF) applied tungsten carbide thermal spray coatings.
Standard
Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less Impingement Applied
2019-01-14
AMS2530A
This specification covers a coating consisting of tungsten disulfide without binders and not requiring a curing process.
Standard
Rotary Flap Peening of Metal Parts
2019-01-04
AMS2590B
This specification covers procedures and requirements for peening of metal parts with portable, bonded-shot, rotary flap assemblies in accordance with AS2592. The principles of rotary flap peening are similar to conventional shot peening, except conversion of arc height values using the magnetic Almen test strip holder is required for intensity determination.
Standard
In-Process Welding of Castings
2018-08-23
AMS2694C
This specification defines the requirements for in-process correction of foundry discontinuities by manual welding of castings.
Standard
Pressure Testing, Hydraulic Pressure as Specified
2018-08-23
AMS2615F
This specification provides requirements and procedures for hydraulic-pressure leak testing of parts.
Standard
Plating, Brush, Tin-Zinc Low Hydrogen Embrittlement
2018-06-15
AMS2451/10B
This specification covers the requirements for brush plating of tin-zinc by electrodeposition.
Standard
Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
2018-02-25
AMS2488D
This specification establishes the engineering requirements for producing an anodic coating on titanium and titanium alloys and the properties of the coating.
Standard
Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
2017-12-11
AMS2451/4D
This specification establishes the requirements for brush plating of cadmium by electrodeposition.
Standard
Lubricant, Instrument Bearing, Petroleum Base Viscosity 35
2017-11-28
AMS3056C
This specification covers the requirements for a refined paraffinic petroleum-base lubricant.
Standard
Plating, Brush, Nickel Low Stress, Low-Hardness Deposit
2017-11-21
AMS2451/3C
This specification covers the requirements for brush plating of low-hardness, low-stress nickel by electrodeposition.
