Standard
In-Process Welding of Castings
2022-09-15
WIP
AMS2694D
This specification defines the requirements for in-process correction of foundry discontinuities by manual welding of castings.
Search Results
Standard
Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
2022-03-29
CURRENT
AMS2451/4E
This specification establishes the requirements for brush plating of cadmium by electrodeposition.
Standard
Carburizing and Heat Treatment of Carburizing Grade Steel Parts
2021-09-15
CURRENT
AMS2759/7E
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS2759, establishes the requirements and procedures for three classes of gas, vacuum, liquid, and low pressure (LPC) carburizing and related heat treatment of parts fabricated from carburizing grade steels. Parts made from steels other than those specified in the detail specifications may be heat treated in accordance with the applicable requirements using processing temperatures, times, and other parameters recommended by the material producer unless otherwise specified by the purchaser. This specification does not cover pack carburizing.
Standard
Qualification of Aerospace Personnel Performing Special Processes
2021-07-23
CURRENT
AS7767
Standard
Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
2019-10-31
CURRENT
AMS2488E
This specification establishes the engineering requirements for producing an anodic coating on titanium and titanium alloys and the properties of the coating.
Standard
Flux, Aluminum Welding
2019-08-20
CURRENT
AMS3414F
This specification covers an aluminum welding flux in the form of powder.
Standard
Etch Inspection of High Strength Steel Parts
2019-07-15
CURRENT
AMS2649D
This specification establishes the requirements for etch inspection of steel parts to detect overheating (rehardening or overtempering) caused by abusive machining or grinding, or to detect localized discontinuous carburization.
Standard
Training and Approval of Heat-Treating Personnel
2019-06-11
CURRENT
ARP1962B
This SAE Aerospace Recommended Practice (ARP) describes training and approval of personnel performing certain heat-treating and associated operations that could have a material impact on the properties of materials being heat treated. It also recommends that only approved personnel perform or monitor the functions listed in Table 1.
Standard
In-Process Welding of Castings
2018-08-23
CURRENT
AMS2694C
This specification defines the requirements for in-process correction of foundry discontinuities by manual welding of castings.
Standard
Plating, Brush, Tin-Zinc Low Hydrogen Embrittlement
2018-06-15
HISTORICAL
AMS2451/10B
This specification covers the requirements for brush plating of tin-zinc by electrodeposition.
Standard
Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
2018-02-25
HISTORICAL
AMS2488D
This specification establishes the engineering requirements for producing an anodic coating on titanium and titanium alloys and the properties of the coating.
Standard
Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
2017-12-11
HISTORICAL
AMS2451/4D
This specification establishes the requirements for brush plating of cadmium by electrodeposition.
Standard
Plating, Brush, Nickel Low Stress, Low-Hardness Deposit
2017-11-21
HISTORICAL
AMS2451/3C
This specification covers the requirements for brush plating of low-hardness, low-stress nickel by electrodeposition.
Standard
Treatment of Sheet Metal Parts Corrosion-Resistant Steel
2017-09-20
CURRENT
AMS2550F
This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic Corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.
Standard
Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
2017-03-17
HISTORICAL
AMS2451/4C
This specification establishes the requirements for brush plating of cadmium by electrodeposition.
Standard
Plating, Brush, Nickel Low Stress, Low-Hardness Deposit
2016-11-29
HISTORICAL
AMS2451/3B
This specification covers the requirements for brush plating of low-hardness, low-stress nickel by electrodeposition.
Standard
Oil, Odorless Heavy Solvent
2016-02-09
CURRENT
AMS3161C
This specification covers a petroleum base material in the form of a liquid.
Standard
Treatment of Sheet Metal Parts Corrosion-Resistant Steel
2014-07-31
HISTORICAL
AMS2550E
This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic Corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.
Standard
Alcohol, Methyl
2014-03-24
CURRENT
AMS3004H
This specification covers methyl alcohol in the form of a liquid.
Standard
Alcohol-Water Mixtures
2013-12-05
CURRENT
AMS3006H
This specification covers mixtures of methyl alcohol and/or ethyl alcohol with water in the form of liquids.
