Search Results

Standard

Ultrasonic Inspection Thin Wall Metal Tubing

2022-06-20

CURRENT

AMS2634C

This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion- and heat-resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.

Standard

Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness

2022-06-02

CURRENT

AMS2632C

This specification covers the procedure for ultrasonic inspection of flat, contoured, round, and hollow cylindrical products having a cross-sectional thickness of 0.02 to 0.50 inch (0.5 to 12.7 mm). This specification does not apply to inspection of composite materials.

Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2021-11-09

CURRENT

AMS2630E

This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.

Standard

Fluorescent Penetrant Inspection Aircraft Structures and Engine Component Maintenance

2021-09-20

CURRENT

AMS2647G

This specification details requirements and procedures for the detection of defects in aircraft structural and engine components during maintenance and overhaul operations.

Standard

Inspection, Ultrasonic, Wrought Metals, Process for

2021-07-15

CURRENT

AMSSTD2154E

The purpose of this standard is to provide uniform methods for the ultrasonic inspection of wrought metals and wrought metal products.

Standard

Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet and Plate

2021-06-22

HISTORICAL

AMS2631F

This specification covers the procedure for ultrasonic inspection of wrought titanium and titanium alloy products 0.25 inch (6.4 mm) and over in cross-section (thickness) or diameter.

Standard

Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure

2020-09-22

CURRENT

ARP4402A

This SAE Aerospace Recommended Practice establishes the requirements and procedures for eddy current inspection of open fastener holes in aluminum aircraft structures.

Standard

Inspection, Ultrasonic, Wrought Metals, Process for

2020-04-03

HISTORICAL

AMSSTD2154D

The purpose of this standard is to provide uniform methods for the ultrasonic inspection of wrought metals and wrought metal products.

Standard

Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts

2019-06-06

CURRENT

ARP4462B

This recommended practice establishes the requirements and procedures for Barkhausen Noise (BN) inspection of ferromagnetic steel components. Applications of the method are listed in 1.2 through 1.5.

Standard

Enhanced Ultrasonic Immersion Inspection for Titanium Alloy and other Metal Alloy Billets

2019-05-16

CURRENT

AMS2628B

This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy round billet 5 inches (127 mm) and over in nominal diameter (see 8.5). Metal alloy billets other than titanium may be tested to this specification with the use of suitable reference standards.

Standard

Ultrasonic Inspection Thin Wall Metal Tubing

2019-04-24

HISTORICAL

AMS2634B

This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.

Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2018-08-08

HISTORICAL

AMS2630D

This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.

Standard

Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness

2018-08-08

HISTORICAL

AMS2632B

This specification covers the procedure for ultrasonic inspection of flat, contoured, round and hollow cylindrical products having a cross-sectional thickness of 0.02 to 0.50 inches (0.5 to 12.7 mm). This specification does not apply to inspection of composite materials.

Standard

Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts

2018-07-10

HISTORICAL

ARP4462A

This recommended practice establishes the requirements and procedures for Barkhausen Noise (BN) inspection of ferromagnetic steel components. Applications of the method are listed below in 1.2 through 1.5.

Standard

Ultrasonic Inspection Centrifugally-Cast, Corrosion-Resistant Steel Tubular Cylinders

2017-10-30

CURRENT

AMS2633D

This procedure covers ultrasonic inspection of tubular, centrifugally-cast, corrosion-resistant steel cylinders.

Standard

Fluorescent Penetrant Inspection Aircraft and Engine Component Maintenance

2017-09-29

HISTORICAL

AMS2647F

This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations.

Standard

Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet and Plate

2017-07-11

HISTORICAL

AMS2631E

This specification covers the procedure for ultrasonic inspection of wrought titanium and titanium alloy products 0.25 inch (6.4 mm) and over in cross-section (thickness) or diameter.

Standard

Ultrasonic Immersion Inspection Titanium and Titanium Alloy Forgings Premium Grade

2016-11-29

CURRENT

AMS2636A

This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy forgings. Premium grade is a term used to describe titanium alloys used for critical rotating components in turbine engines. For details, see SAE AMS2380, the specification that covers the procedures for approval of products of premium-quality titanium alloys and the controls to be exercised in producing such products.

Standard

Ultrasonic Immersion Inspection Titanium and Titanium Alloy Billet Premium Grade

2013-07-11

HISTORICAL

AMS2628A

This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy round billet 5.0 inches (127 mm) and over in nominal diameter.

Standard

Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware

2013-06-11

HISTORICAL

AS4787

This SAE Aerospace Standard (AS) establishes minimum requirements for eddy current inspection of circular holes in nonferrous, metallic, aircraft engine hardware with fasteners removed. The inspection is intended to be performed at maintenance and overhaul facilities on engine run hardware.