Refine Your Search

Date

Date

Topic

Topic

Tests and Testing Aluminum alloys Management and Organizations Lubricants AMS K Non Destructive Methods and Processes Committee

Search Results

Viewing 1 to 20 of 213
123Next >Last >>
Sort by published
Standard

Ultrasonic Inspection, Thin Wall Metal Tubing
2024-04-04
WIP
AMS2634D
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion- and heat-resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.
Standard

Exposure Levels of UV Radiation in Nondestructive Inspection Processes
2023-10-04
WIP
AIR4964A
Long wave ultraviolet or UV-A radiation (between 320 59 400nm) is used for fluorescent inspections in magnetic particle and liquid penetrant examinations. The UV-A radiationn is obtained from either fluorescent or high intensity discharge lamps that are stationary or portable. The commercially available UV-A lamps possess a large variation in intensity output that can cause a legitimate concern for possible health hazard. This draft reviews the nature of UV-A radiation emitted by these lights, blacklight equipment, acceptable UV dosage limits adopted by the American Conference of Governmental Industrial Hygienists (ACGIH) and European Standards Committee for Nondestructive Testing, and recommendation of proper practices when working with UV-A radiation.
Standard

Nondestructive Inspection Program Requirements for Aerospace Systems
2023-06-02
CURRENT
AS6870A
This SAE Aerospace Standard defines the requirements for establishing a nondestructive inspection (NDI) program for aerospace systems to include but not limited to aircraft structure, aircraft stores (external structures such as antennas, pods, fuel tanks, weapons, radomes, etc.) and missile/rocket structural components when an NDI Program Plan is required by contract. NDI Programs are essential to ensuring NDI processes are implemented to support the lifecycle design requirements of the system and its components. NDI Programs are applicable to all phases of the system life cycle, including acquisition, modification, and sustainment. This standard may also be applicable to mechanical equipment, subsystems, and propulsion systems, but the requirements defined by the NDI Program Plan should be tailored by the contracting agency for such use.
Standard

Magnetic Particles, Nonfluorescent Dry Method
2023-05-10
CURRENT
AMS3040E
This specification covers nonfluorescent, magnetic particles having black, red, gray, or other color, as specified, supplied in the form of dry powders.
Standard

Magnetic Particles, Nonfluorescent Wet Method, Oil Vehicle, Ready-to-Use
2023-02-20
CURRENT
AMS3041G
This specification covers nonfluorescent magnetic particles in the form of a mixed, ready-to-use suspension in an odorless inspection oil vehicle. The magnetic particles shall be in the form of either a single material or composite material as defined in 1.3.
Standard

Magnetic Particles, Nonfluorescent Wet Method, Dry Powder
2022-08-05
CURRENT
AMS3042G
This specification covers nonfluorescent, magnetic particles in the form of dry powders in the form of single or composite magnetic particle intended to be suspended in oil or conditioned water vehicle for use in the wet method, magnetic particle inspection.
Standard

Ultrasonic Inspection Thin Wall Metal Tubing
2022-06-20
CURRENT
AMS2634C
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion- and heat-resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.
Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick
2021-11-09
CURRENT
AMS2630E
This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
Standard

Inspection Material, Penetrant
2021-04-30
WIP
AMS2644J
This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.
123Next >Last >>
X