Search Results

Standard

Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Aerosol Packaged

2023-05-10

CURRENT

AMS3043F

This specification covers nonfluorescent magnetic particles in the form of a mixed, ready-to-use suspension in an odorless oil vehicle and packaged in aerosol cans.

Standard

Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness

2022-06-02

CURRENT

AMS2632C

This specification covers the procedure for ultrasonic inspection of flat, contoured, round, and hollow cylindrical products having a cross-sectional thickness of 0.02 to 0.50 inch (0.5 to 12.7 mm). This specification does not apply to inspection of composite materials.

Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2021-11-09

CURRENT

AMS2630E

This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.

Standard

Fluorescent Penetrant Inspection Aircraft Structures and Engine Component Maintenance

2021-09-20

CURRENT

AMS2647G

This specification details requirements and procedures for the detection of defects in aircraft structural and engine components during maintenance and overhaul operations.

Standard

Inspection, Ultrasonic, Wrought Metals, Process for

2021-07-15

CURRENT

AMSSTD2154E

The purpose of this standard is to provide uniform methods for the ultrasonic inspection of wrought metals and wrought metal products.

Standard

Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet and Plate

2021-06-22

HISTORICAL

AMS2631F

This specification covers the procedure for ultrasonic inspection of wrought titanium and titanium alloy products 0.25 inch (6.4 mm) and over in cross-section (thickness) or diameter.

Standard

Inspection Material, Penetrant

2021-04-30

WIP

AMS2644J

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.

Standard

Vehicle, Magnetic Particle Inspection Petroleum Base

2020-10-09

CURRENT

AMS2641D

This specification covers two types of refined hydrocarbon compounds in the form of liquids. This specification only covers newly manufactured materials.

Standard

Inspection Material, Penetrant

2020-07-14

CURRENT

AMS2644H

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.

Standard

Inspection, Ultrasonic, Wrought Metals, Process for

2020-04-03

HISTORICAL

AMSSTD2154D

The purpose of this standard is to provide uniform methods for the ultrasonic inspection of wrought metals and wrought metal products.

Standard

Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts

2019-06-06

CURRENT

ARP4462B

This recommended practice establishes the requirements and procedures for Barkhausen Noise (BN) inspection of ferromagnetic steel components. Applications of the method are listed in 1.2 through 1.5.

Standard

Enhanced Ultrasonic Immersion Inspection for Titanium Alloy and other Metal Alloy Billets

2019-05-16

CURRENT

AMS2628B

This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy round billet 5 inches (127 mm) and over in nominal diameter (see 8.5). Metal alloy billets other than titanium may be tested to this specification with the use of suitable reference standards.

Standard

Inspection Material, Penetrant

2019-04-08

HISTORICAL

AMS2644G

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.

Standard

Ultrasonic Thickness Testing

2018-09-21

HISTORICAL

ARP2654

To provide general instructions for accomplishing ultrasonic thickness measurements. Measurements can be made from one side of a material when access to the opposite side is restricted.

Standard

Solution, Fluorescent Penetrant Water Base for LOX (Liquid Oxygen) Compatibility

2018-09-04

HISTORICAL

AMS3158D

This specification covers a stable, noncorrosive, water-soluble, highly-penetrating, fluorescent solution which may, but need not, be diluted with an appropriate amount of water for use.

Standard

Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Aerosol Packaged

2018-08-31

HISTORICAL

AMS3043E

This specification covers nonfluorescent magnetic particles in the form of a mixed, ready-to-use suspension in an odorless oil vehicle and packaged in aerosol cans.

Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2018-08-08

HISTORICAL

AMS2630D

This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.

Standard

Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness

2018-08-08

HISTORICAL

AMS2632B

This specification covers the procedure for ultrasonic inspection of flat, contoured, round and hollow cylindrical products having a cross-sectional thickness of 0.02 to 0.50 inches (0.5 to 12.7 mm). This specification does not apply to inspection of composite materials.

Standard

Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts

2018-07-10

HISTORICAL

ARP4462A

This recommended practice establishes the requirements and procedures for Barkhausen Noise (BN) inspection of ferromagnetic steel components. Applications of the method are listed below in 1.2 through 1.5.

Standard

Reference Standards Notched Shims for Magnetic Particle Inspection

2017-10-30

CURRENT

AS5371A

This SAE Aerospace Standard (AS) establishes requirements for the manufacture of shim-type reference standards containing artificial flaws (notches) for use in the magnetic particle inspection process.