Search Results

Standard

Ultrasonic Inspection Thin Wall Metal Tubing

2022-06-20

AMS2634C

This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion- and heat-resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.

Standard

Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness

2022-06-02

AMS2632C

This specification covers the procedure for ultrasonic inspection of flat, contoured, round, and hollow cylindrical products having a cross-sectional thickness of 0.02 to 0.50 inch (0.5 to 12.7 mm). This specification does not apply to inspection of composite materials.

Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2021-11-09

AMS2630E

This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.

Standard

Fluorescent Penetrant Inspection Aircraft Structures and Engine Component Maintenance

2021-09-20

AMS2647G

This specification details requirements and procedures for the detection of defects in aircraft structural and engine components during maintenance and overhaul operations.

Standard

Inspection, Ultrasonic, Wrought Metals, Process for

2021-07-15

AMSSTD2154E

The purpose of this standard is to provide uniform methods for the ultrasonic inspection of wrought metals and wrought metal products.

Standard

Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet and Plate

2021-06-22

AMS2631F

This specification covers the procedure for ultrasonic inspection of wrought titanium and titanium alloy products 0.25 inch (6.4 mm) and over in cross-section (thickness) or diameter.

Standard

Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure

2020-09-22

ARP4402A

This SAE Aerospace Recommended Practice establishes the requirements and procedures for eddy current inspection of open fastener holes in aluminum aircraft structures.

Standard

Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Aerosol Packaged

2020-01-03

AMS3046H

This specification covers one type of fluorescent magnetic particles in the form of a mixed, ready-to-use suspension in an odorless, inspection oil vehicle and packaged in aerosol cans.

Standard

Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware

2019-10-14

AS4787A

This SAE Aerospace Standard (AS) establishes minimum requirements for eddy current inspection of circular holes in nonferrous, metallic, low conductivity (less than 5% IACS) aircraft engine hardware with fasteners removed. The inspection is intended to be performed at maintenance and overhaul facilities on engine run hardware.

Standard

Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts

2019-06-06

ARP4462B

This recommended practice establishes the requirements and procedures for Barkhausen Noise (BN) inspection of ferromagnetic steel components. Applications of the method are listed in 1.2 through 1.5.

Standard

Enhanced Ultrasonic Immersion Inspection for Titanium Alloy and other Metal Alloy Billets

2019-05-16

AMS2628B

This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy round billet 5 inches (127 mm) and over in nominal diameter (see 8.5). Metal alloy billets other than titanium may be tested to this specification with the use of suitable reference standards.

Standard

Ultrasonic Inspection Thin Wall Metal Tubing

2019-04-24

AMS2634B

This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.

Standard

Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Ready-to-Use

2019-03-06

AMS3045F

This specification covers fluorescent magnetic particles in the form of a mixed, ready-to-use suspension in an odorless inspection oil vehicle.

Standard

Magnetic Particles, Fluorescent Wet Method, Dry Powder

2019-03-06

AMS3044G

This specification covers fluorescent magnetic particles in the form of a dry powder.

Standard

Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Aerosol Packaged

2019-02-21

AMS3046G

This specification covers one type of fluorescent magnetic particles in the form of a mixed, ready-to-use suspension in an odorless, inspection oil vehicle and packaged in aerosol cans.

Standard

Ultrasonic Thickness Testing

2018-09-21

ARP2654

To provide general instructions for accomplishing ultrasonic thickness measurements. Measurements can be made from one side of a material when access to the opposite side is restricted.

Standard

Solution, Fluorescent Penetrant Water Base for LOX (Liquid Oxygen) Compatibility

2018-09-04

AMS3158D

This specification covers a stable, noncorrosive, water-soluble, highly-penetrating, fluorescent solution which may, but need not, be diluted with an appropriate amount of water for use.

Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

2018-08-08

AMS2630D

This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.

Standard

Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness

2018-08-08

AMS2632B

This specification covers the procedure for ultrasonic inspection of flat, contoured, round and hollow cylindrical products having a cross-sectional thickness of 0.02 to 0.50 inches (0.5 to 12.7 mm). This specification does not apply to inspection of composite materials.

Standard

Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts

2018-07-10

ARP4462A

This recommended practice establishes the requirements and procedures for Barkhausen Noise (BN) inspection of ferromagnetic steel components. Applications of the method are listed below in 1.2 through 1.5.