Search Results

Standard

Tire Selection Tables for Agricultural Tractors of Future Design

2009-08-17

J711_200908

This SAE Recommended Practice is established for the purpose of providing selection tables of tires preferred for the application to machines of future design. The objective of the tables is to minimize the number of tire sizes.

Standard

Liquid Ballast Table for Drive Tires of Agricultural Tractors

2009-08-17

J884_200908

This SAE Recommended Practice is established for the purpose of providing average weight values for water or calcium chloride liquid filling solutions in SAE recommended drive tire sizes. It is recommended that tires be filled to valve stem level while the valve is located in the highest position.

Standard

Agricultural Tractor Tire Loadings, Torque Factors, and Inflation Pressures

2009-08-17

J709_200908

This SAE Standard establishes loadings, tangential pull values, and inflation pressure relationships for tire sizes and ply ratings currently used on agricultural tractors. Primary purpose of this recommendation is for use with SAE J708 May59. The performance of the tractor is materially affected by tire loadings, tire tangential pull values, and inflation pressure; therefore, it becomes desirable to publish this information.

Standard

Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors

2002-08-29

J2194_200208

Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met.

Standard

Flashing Warning Lamp for Agricultural Equipment

2002-08-22

J974_200208

This SAE Standard covers the general requirements and the test requirements for a flashing warning lamp for agricultural equipment.

Standard

Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors

2001-03-02

J1036_200103

This SAE Standard specifies the essential interface dimensions, the installation dimensions and the operating requirements for hydraulic couplers employed to transmit hydraulic power from agricultural tractors to agricultural implements and farmstead equipment as defined in SAE J1150.

Standard

ROLL-OVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS

1997-09-01

J2194_199709

Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met.

Standard

Front-Mounted Linkage for Agricultural Wheeled Tractors

1996-07-01

J2131_199607

This SAE Standard describes the requirements of the linkage to attach implements or equipment to the front of agricultural wheeled tractors. This shall be a three-point linkage in association with a power lift. It applies to the categories defined in ISO 730/1.

Standard

SLOW-MOVING VEHICLE IDENTIFICATION EMBLEM

1993-06-10

J943_199306

This SAE Standard establishes emblem dimensional specifications, performance requirements, related test procedures, and mounting requirements.

Standard

FLASHING WARNING LAMP FOR AGRICULTURAL EQUIPMENT

1993-06-10

J974_199306

This SAE Standard covers the general requirements and the test requirements for a flashing warning lamp for agricultural equipment.

Standard

ROLL-OVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS

1993-06-01

J2194_199306

Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met.

Standard

Three-Point Free-Link Hitch Attachment of Implements to Agricultural Wheeled Tractors

1993-06-01

J715_199306

This SAE Standard sets forth requirements for the attachment of three-point hitch implements or equipment to the rear of agricultural wheeled tractors by means of a three-point free-link in association with a power lift.

Standard

DIMENSIONAL STANDARD FOR CYLINDRICAL HYDRAULIC COUPLERS FOR AGRICULTURAL TRACTORS

1993-04-01

J1036_199304

This SAE Standard specifies the essential interface dimensions, the installation dimensions, and the operating requirements for hydraulic couplers employed to transmit hydraulic power from agricultural tractors to agricultural implements and farmstead equipment as defined in SAE J1150.

Standard

OPERATING REQUIREMENTS FOR TRACTORS AND POWER TAKE-OFF DRIVEN IMPLEMENTS

1993-02-04

J721_199302

This SAE Standard was prepared to assist manufacturers of tractors and implements in providing suitable means of transmitting power from the tractor power take-off to the Implement and satisfactory hitching of the implement to the tractor.

Standard

Braking System Test Procedures and Braking Performance Criteria for Agricultural Tractors

1992-09-01

J1041_199209

The test procedures and performance criteria are directed to operation and parking of agricultural tractors equipped with braking system(s) and having a maximum design speed exceeding 6 km/h. Combinations of agricultural towing machines equipped with braking systems and towed agricultural machines without braking systems are included in this SAE Standard.

Standard

BRAKING SYSTEM TEST PROCEDURES AND BRAKING PERFORMANCE CRITERIA FOR AGRICULTURAL TRACTORS

1991-10-01

J1041_199110

The test procedures and performance criteria are directed to operation and parking of agricultural tractors equipped with braking system(s) and having a maximum design speed exceeding 6 km/h. Combinations of agricultural towing machines equipped with braking systems and towed agricultural machines without braking systems are included in this SAE Standard.

Standard

TIRE SELECTION TABLES FOR AGRICULTURAL TRACTORS OF FUTURE DESIGN

1991-03-01

J711_199103

This SAE Recommended Practice is established for the purpose of providing selection tables of tires preferred for application to machines of future design. The objective of Tables 1 and 2 is to minimize the number of tire sizes.

Standard

LIQUID BALLAST TABLE FOR DRIVE TIRES OF AGRICULTURAL TRACTORS

1991-03-01

J884_199103

This SAE Recommended Practice is established for the purpose of providing average weight values for water or calcium chloride liquid filling solutions in SAE recommended drive tire sizes. It is recommended that tires be filled to valve stem level while the valve is located in the highest position (see Tables 1A and 1B).

Standard

MOUNTING BRACKETS AND SOCKET FOR WARNING LAMP AND SLOW-MOVING VEHICLE (SMV) DENTIFICATION EMBLEM

1991-03-01

J725_199103

The bracket shown in Figure 1 is intended for fixed attachment to the SMV emblem and to provide, through the tapered portion, a means of detachably mounting the emblem assembly in cooperation with the socket shown in Figure 2.

Standard

DRAWBARS - AGRICULTURAL WHEEL TRACTORS

1989-05-01

J1548_198905