Refine Your Search

Date

Date

Technical review Airlines Electronic Engineering Committee Alternative fuels Tools and equipment

Search Results

Viewing 1 to 20 of 33
12Next >Last >>
Sort by published
Standard

AVIONICS APPLICATION SOFTWARE STANDARD INTERFACE PART 0 OVERVIEW OF ARINC 653
2021-11-15
CURRENT
ARINC653P0-3
This document provides an overview of the entire set of documents collectively referred to as ARINC 653. As this set of documents evolves, Part 0 has been adjusted to reflect technical changes made in Supplements to Parts 1 through 5 in conjunction with the technical changes made in the evolution of ARINC 653. A summary of the ARINC 653 documents follows: Part 0 – Overview of ARINC 653 Part 1 – Required Services Part 2 – Extended Services Part 3A – Conformity Test Specification for ARINC 653 Required Services Part 3B – Conformity Test Specification for ARINC 653 Extended Services Part 4 – Subset Services Part 5 – Core Software Recommended Capabilities The term “this document” refers to Part 0 only, while the term “ARINC 653” or “the Specification” refers to the whole set of ARINC 653 documents, currently Parts 0 to 5.
Standard

STANDARD DATA INTERFACE FOR GALLEY INSERT (GAIN) EQUIPMENT PART 1 CAN COMMUNICATIONS
2021-09-10
CURRENT
ARINC812AP1-2
The purpose of this specification is to define the general Galley Insert (GAIN)standardization philosophy, provide comprehensive equipment interfaces, and disseminate the most current industry guidance. Part 1 covers the Controller Area Network (CAN) data interface attachments, envelopes, and data content to be considered between all galley equipment using a Galley Data Bus as described within this specification. This document is intended as the successor and replacement for ARINC Specification 812. This document contains significant improvements to CAN data interfaces.
Standard

CABIN EQUIPMENT INTERFACES PART 5 CABIN ELECTRICAL EQUIPMENT AND WIRING INSTALLATION GUIDELINES
2020-07-24
CURRENT
ARINC628P5-4
ARINC Specification 628, Cabin Equipment Interfaces (CEI) Part 5 Parts Selection, Wire Design and Installation Guidelines, provides design and mounting guidelines for electrical installations, mainly for supplier of cabin furnishing equipment. Part 5 addresses several aspects of installation and is divided into five sections: Introduction, Parts Selection, Electrical Wire Design Guidelines, Wire Installation Guidelines, and Documentation Guidelines. Guidelines regarding design, safety, and other subjects relevant to acceptance of the end item are addressed. Notes explaining the reason for setting a guideline or suggesting methods for performing the task are provided in commentary. The content of the document is designed to make it usable for reference by industry, particularly manufacturers of seats and equipment.
Standard

CABIN EQUIPMENT INTERFACES PART 2 PHYSICAL LAYER - IN-SEAT PROTOCOL
2020-06-30
CURRENT
ARINC485P2-5
ARINC Specification 485, Part 2 specifies the ARINC 485-control protocol used by the LRUs described in ARINC Specification 628 Part 2. This document defines a multi-drop bus. The point-to-point configuration is also supported. The point-to-point bus is treated simply as a multi-drop bus with only one drop. There is one master LRU and one or more slave LRUs present on the bus. However; multiple buses may be connected in parallel, where each parallel bus operates independently from each other.
Standard

CABIN EQUIPMENT NETWORK BUS
2020-06-19
CURRENT
ARINC854
This standard defines a new cabin network bus. While ARINC Specification 485: Cabin Equipment Interfaces, Part 2, Physical Layer – In-seat Protocol defined a low-speed serial communications interface between electronic equipment in the passenger seat, it is design-focused on obtaining status from in-seat electronic equipment. ARINC Specification 854 is a messaging protocol but does not preclude using the bus for video streaming or multicast. Cabin Equipment has evolved from the very simple to quite sophisticated systems. The resulting communications needs have surpassed the ability of ARINC 485 to provide the necessary data capacity and response times. The basic requirements for low latency, full duplex, elimination of ARINC 485 Master/Slave polling and lower weight drives the selection of 100BASE-T1 (per IEEE 802.3) as the preferred bus format.
Standard

AVIONICS APPLICATION SOFTWARE STANDARD INTERFACE PART 0 OVERVIEW OF ARINC 653
2019-08-07
CURRENT
ARINC653P0-2
This document provides an overview of the entire set of documents collectively referred to as ARINC 653. As this set of documents evolves, Supplements to Part 0 will be made more consistent with Parts 1 through 5 in conjunction with the technical changes expected to be made in the evolution of ARINC 653. A summary of the ARINC 653 documents follows: Part 0 - Overview of ARINC 653, Part 1 - Required Services, Part 2 - Extended Services, Part 3 - Conformity Test Specification, Part 4 - Subset Services, and Part 5 - Core Software Required Capabilities. Supplement 1 reflects the introduction of multicore processor support in Parts 1 and 2.
Standard

CABIN STANDARD ENCLOSURES
2018-11-20
CURRENT
ARINC836A
The purpose of this specification is to define standard cabin equipment enclosures and provisions for equipment attachment on monuments. This standard is intended to enable simpler installation and maintenance of cabin equipment, resulting in time and cost reduction.
Standard

CABIN EQUIPMENT INTERFACES 4GCN CABIN MANAGEMENT AND ENTERTAINMENT SYSTEM, CABIN DISTRIBUTION SYSTEM
2016-07-14
CURRENT
ARINC832-1
ARINC Specification 832 defines standards for the aircraft 4th Generation Cabin Network (4GCN) Cabin Distribution System (CDS) wiring, connectors, power, identification codes, space envelopes, and mounting principles. Design guidelines are included for informational purposes as these guidelines impact the interfaces and installation of cabin equipment aboard the aircraft.
Standard

DEFINITION OF STANDARD INTERFACES FOR GALLEY INSERT (GAIN) EQUIPMENT PHYSICAL INTERFACES
2015-11-23
CURRENT
ARINC810-5
ARINC 810 defines galley equipment physical attachments, envelopes, connections, and qualification guidelines for interchangeable galley equipment. Supplement 5 defines a size 6 galley insert, intended for microwave oven installation and other equipment suited to this type of installation. Supplement 5 also clarifies reference dimensioning for all GAIN sizes defined by ARINC 810.
Standard

AVIONICS APPLICATION SOFTWARE STANDARD INTERFACE PART 0 OVERVIEW OF ARINC 653
2015-08-03
CURRENT
ARINC653P0-1
This document provides an overview of the entire set of documents collectively referred to as ARINC 653. As this set of documents evolves, Supplements to Parts 1 through 5 will be made more consistent with Part 0 in conjunction with the technical changes expected to be made in the evolution of ARINC 653. A summary of the ARINC 653 documents follows: Part 0 - Overview of ARINC 653, Part 1 - Required Services, Part 2 - Extended Services, Part 3 - Conformity Test Specification, Part 4 - Subset Services, and Part 5 - Core Software Required Capabilities. Supplement 1 reflects the introduction of multicore processor support in Parts 1 and 2.
Standard

GUIDANCE FOR TOOL AND TEST EQUIPMENT (TTE) EQUIVALENCY
2015-08-01
CURRENT
ARINC735B-2
This document defines a Traffic Surveillance capability for NextGen and SESAR airspace environments. Supplement 2 adds hybrid surveillance functionality. It satisfies recent updates to FAA Airworthiness Circular AC 20-151B - Airworthiness Approval of Traffic Alert and Collision Avoidance Systems (TCAS II), and Technical Standard Order TSO-119d requiring the annunciation of a hybrid surveillance failure. Supplement 2 also adds strobe program pinning, updates TCAS inputs status, improves aircraft troubleshooting, and supports recent central maintenance computer function block point updates.
Standard

CABIN EQUIPMENT INTERFACES PART 0 CABIN MANAGEMENT AND ENTERTAINMENT SYSTEM - OVERVIEW
2015-07-27
CURRENT
ARINC628P0-3
The purpose of this document is to provide an introduction and overview of the ARINC 628 series of Specifications. ARINC 628 defines equipment and installation standards for cabin equipment, which is generally defined as communication and entertainment equipment designed for passenger use. Part 0 provides the concepts and overview of ARINC 628 and descriptions of each individual part. Appendix B is written in briefing chart format to facilitate the user in preparing quick-reaction overhead projection-type presentations. Supplement 3 represents a summary of recent changes to Parts 1 through 9 of ARINC Specification 628.
Standard

STANDARD DATA INTERFACE FOR GALLEY INSERT (GAIN) EQUIPMENT PART 1 CAN COMMUNICATIONS
2014-08-26
CURRENT
ARINC812AP1-1
The purpose of this specification is to define the general Galley Insert (GAIN)standardization philosophy, provide comprehensive equipment interfaces, and disseminate the most current industry guidance. Part 1 covers the Controller Area Network (CAN) data interface attachments, envelopes, and data content to be considered between all galley equipment using a Galley Data Bus as described within this specification. This document is intended as the successor and replacement for ARINC Specification 812. This document contains significant improvements to CAN data interfaces.
Standard

MARK I AVIATION KU-BAND AND KA-BAND SATELLITE COMMUNICATION SYSTEM PART 2 ELECTRICAL INTERFACES AND FUNCTIONAL EQUIPMENT DESCRIPTION
2014-07-28
CURRENT
ARINC791P2-1
This document provides the interface definition of the Satcom system. Any signal crossing into or out of the communication system is documented to ease aircraft integration. Signals within the ARINC 791 Satcom system, and in particular, between the Modman and the Antenna Subsystem, are described to permit interchangeability between any Modman and any Antenna Subsystem.
Standard

CABIN EQUIPMENT INTERFACES PART 7 CABIN EQUIPMENT COOLING GENERAL SPECIFICATION
2013-06-24
CURRENT
ARINC628P7-2
Cabin equipment installations tend to impose loads on aircraft electrical power systems not envisioned in the original airplane design. This standard provides guidance on the design of future aircraft air conditioning and equipment cooling systems. It also describes the environment in which cabin systems, including In-Flight Entertainment equipment are expected to operate.
Standard

CABIN EQUIPMENT INTERFACES PART 5 CABIN ELECTRICA EQUIPMENT AND WIRING INSTALLATION GUIDELINES
2013-06-14
CURRENT
ARINC628P5-3
ARINC Specification 628, Cabin Equipment Interfaces (CEI) Part 5 Parts Selection, Wire Design and Installation Guidelines, provides design and mounting guidelines for electrical installations, mainly for supplier of cabin furnishing equipment. Part 5 addresses several aspects of installation and is divided into five sections: Introduction, Parts Selection, Electrical Wire Design Guidelines, Wire Installation Guidelines, and Documentation Guidelines. Guidelines regarding design, safety, and other subjects relevant to acceptance of the end item are addressed. Notes explaining the reason for setting a guideline or suggesting methods for performing the task are provided in commentary. The content of the document is designed to make it usable for reference by industry, particularly manufacturers of seats and equipment.
Standard

CABIN CONNECTORS AND CABLES PART 1 DESCRIPTION AND OVERVIEW
2012-11-19
CURRENT
ARINC800P1
This document is the first of a multi-part specification that will provide a catalog of cabin connector and cables that may be used in ARINC Standard cabin systems, including In-Flight Entertainment. Part 1 describes connector and cable requirements and evaluation criteria for the interface components used in the integration of cabin systems. Future releases will define connectors, contacts, and termination methods in Part 2. Cables will be specified in Part 3.
Standard

AVIATION SATELLITE COMMUNICATION SYSTEM PART 2 SYSTEM DESIGN AND EQUIPMENT FUNCTIONAL DESCRIPTION
2012-06-27
CURRENT
ARINC741P2-11
This document describes the desired operational capability of the equipment as configured with the first generation Satellite Data Unit (SDU) to provide data and voice communications, as well as additional standards necessary to ensure interchangeability. Supplement 11 adds commentary on the commonality of physical interfaces between ARINC 741 systems defined for SwiftBroadband safety services and ARINC 741 systems defined only for the Inmarsat Classic Aero safety services. It adds the SwiftBroadband safety services to the SDU functional definition.
Standard

CABIN STANDARD ENCLOSURES - MODULAR RACK PRINCIPLE (MRP)
2012-06-22
CURRENT
ARINC836
This document provides installation standards for cabin equipment and related mechanical enclosures. It provides provisions for equipment attachment on overhead racks and monuments. The document provides a series of standard volumes and associated masses. Standardized packaging of cabin systems components is expected to yield simpler installation and maintenance of cabin equipment. This is expected to reduce the time and cost related to installing and maintaining cabin systems.
12Next >Last >>
X