Search Results

Effective thermal and micrometeoroid protection as afforded by the Thermal Micrometeoroid Garment (TMG) is critical in achieving safe and efficient missions. It is also critical that the TMG does not increase torque or decreased range of motion which can cause crewmember discomfort, fatigue, and reduced efficiency. For future exploration missions, removable and replaceable TMGs will allow the use of different pressure garment protective covers and TMG configurations for launch, re-entry, 0-G Extra Vehicular Activity (EVA), and lunar surface EVA. A study was conducted with the goal of developing high Technology Readiness Level (TRL), scalable, interface design concepts for TMG systems. The affects of TMG segmentation on mobility and donning were assessed. Closure mechanisms were investigated and tested to determine their operability after exposure to lunar dust. A TMG configuration with the optimum number of segments and location of interfaces was selected for the Mark III spacesuit.

A trade study was conducted with a goal to develop relatively high TRL design concepts for an Exploration Cooling Garment (ExCG) that can accommodate larger metabolic loads and maintain physiological limits of the crewmembers health and work efficiency during all phases of exploration missions without hindering mobility. Effective personal cooling through use of an ExCG is critical in achieving safe and efficient missions. Crew thermoregulation not only impacts comfort during suited operations but also directly affects human performance. Since the ExCG is intimately worn and interfaces with comfort items, it is also critical to overall crewmember physical comfort. Both thermal and physical comfort are essential for the long term, continuous wear expected of the ExCG.

ILC Dover Inc. was awarded a three-year NRA grant for the development of innovative spacesuit pressure garment technology that will enable safer, more reliable, and effective human exploration of the space frontier. The research focused on the development of a high performance mobility/sizing actuation system for a spacesuit soft upper torso (SUT) pressure garment. This technology has application in two areas (1) repositioning the scye bearings to improve specific joint motion i.e. hammering (Figure 1), hand over hand translation (Figure 2), etc., and (2) as a suit sizing mechanism to allow easier suit entry and more accurate suit fit with fewer torso sizes than the existing EMU. This research was divided into three phases. In phases 1 and 2 SUT actuation technologies were developed and evaluated.

ILC Dover, LP designed and manufactured a rear entry upper torso prototype for the I-Suit advanced spacesuit. In September 2005 ILC Dover participated in the Desert Research and Technology Study (RATS) led by the Advanced Extravehicular Activity (EVA) team from National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC). Desert RATS is a two-week remote field test at Meteor Crater, Arizona. Team members are from NASA, several universities, and a number of industry partners. These groups come together to gain hands-on experience with advanced spacesuit systems and to develop realistic requirements for future Moon and Mars exploration. Desert RATS gave ILC Dover the opportunity to put the rear entry I-Suit through many rigorous tests. The lessons learned there will be valuable for determining basic requirements for future lunar and Mars missions. Desert RATS utilizes a ‘learn-by-doing’ approach for understanding what future requirements should be developed.

As Extra-Vehicular Activity (EVA) is becoming more challenging and a renewed interest into planetary exploration is being pursued, having a spacesuit glove that is able to perform more complex and dexterous tasks with less hand fatigue is critical. In an effort to build upon an already proven foundation a new investigation has been made into reducing the torque of the Phase VI Glove Thermal Micrometeoroid Garment (TMG) along with improving dexterity and tactility. This paper addresses the makeup of the Phase VI Glove TMG and details the investigation into improving the current design. An investigation into alternative heating methods was also pursued.

The shortened liquid cooling/warming garment (SLCWG) developed by the University of Minnesota group was compared with the standard NASA liquid cooling/ventilating garment (LCVG) garment during physical exertion in comfort (24°C) and hot (35°C) chamber environments. In both environmental conditions, the SLCWG was just as effective as the LCVG in maintaining rectal temperature (Tre) in a thermal comfort range; sweat production on the face was less; and subjective perception of overall and local body comfort was higher. The findings indicate that the SLCWG produces the same or greater comfort level as that achieved with the LCVG's total coverage of the body surface.

The I-Suit has been tested in varying environments at Johnson Space Center (JSC). This includes laboratory mobility testing, KC-135 partial gravity flights, and remote field testing in the Mojave Desert. The experience gained from this testing has provided insight for design improvements. These improvements have been an evolutionary process since 1998 to the present. The design improvements affect existing suit components and introduce new components for systems processing and human/robotic interface. Examples of these design improvements include improved mobility joints, a new helmet with integrated communications and displays capability, and integration of textile switches for control of suit functions and tele-robotic operations. This paper addresses an overview of I-Suit design improvements and results of manned and unmanned performance tests.

Since the early 1980’s, the Shuttle Extra Vehicular Activity (EVA) glove design has evolved to meet the challenge of space based tasks. These tasks have typically been satellite retrieval and repair or EVA based flight experiments. With the start of the International Space Station (ISS) assembly, the number of EVA based missions is increasing far beyond what has been required in the past; this has commonly been referred to as the “Wall of EVA’s”. To meet this challenge, it was determined that the evolution of the current glove design would not meet future mission objectives. Instead, a revolution in glove design was needed to create a high performance tool that would effectively increase crewmember mission efficiency. The results of this effort have led to the design, certification and implementation of the Phase VI EVA glove into the Shuttle flight program.

The continuous development of Extravehicular Activity (EVA) spacesuit gloves has lead to an effective solution for performing EVA to date. Some aspects of the current EVA gloves have been noted to affect crew performance in the form of limited dexterity and accelerated onset of fatigue from high torque mobility joints. This in conjunction with the fact that more frequent and complex EVAs will occur with the fabrication and occupation of Space Station Freedom, suggest the need for improved spacesuit gloves. Therefore, several efforts have been conducted in the recent past to enhance the performance of the spacesuit glove. The following is a description of the work performed in these programs and their impact on the design and performance of EVA equipment. In the late 1980's and early 1990's, a spacesuit glove design was developed that focused on building a more conformal glove with improved mobility joints that could function well at a higher operating pressure.

The success of astronauts performing Extra-Vehicular Activity (EVA) is highly dependent on the performance capabilities of their spacesuit gloves. Thermal protection of crewmember's hands has always been a critical concern but has recently become more important because of the increasing role of the crewmember in the manipulation of objects in the environment of space. The utilization of EVA for challenging missions, such as the Hubble Space Telescope (HST) repair and Space Station assembly missions, has prompted the need for improved glove thermal protection. The increased manipulation of hot and cold objects is necessary to complete these complex missions. Thermal protection of the spacesuit glove is accomplished by the Thermal and Micrometeoroid Garment (TMG). The TMG is a multilayered cover that fits over the restraint layer of the spacesuit glove. The TMG is engineered to provide thermal protection for crewmember's hands as well as for the glove bladder and restraint.