Search Results

Standard

Diesel Injection Pump Testing—Part 2: Orifice Plate Flow Measurement

2021-03-17

CURRENT

J968/2_202103

This part of SAE J968 specifies the flow measuring system, including the fixture, to be used for flow testing the single hole orifice plates used in an orifice plate type nozzle and holder assembly (described in SAE J968/1) which is intended for testing and setting diesel fuel injection pumps on test benches. The flow measuring system and fixture ensure accurate flow testing of the entire range of orifices from 0.4 to 0.8 mm diameter as specified in SAE J968/1. It is intended primarily for use by the manufacturers of single hole orifice plates.

Standard

Road Vehicles - High Pressure Fuel Injection Pipe End - Connections With 60 Degree Female Cone

2015-11-24

CURRENT

J1949_201511

This SAE Standard specifies the dimensional requirements for the assembly of high-pressure pipe connections for compression-ignition (diesel) engine fuel injection equipment. It applies to 60 deg female cones with external threaded connectors types 1 and 2, and to the internal threaded tube nuts and male cone type end assembly of high- pressure pipe connections for tubes with diameters up to 12 mm inclusive.

Standard

Fuel Injection Pumps - High Pressure Pipes (Tubing) for Testing

2015-11-24

CURRENT

J1418_201511

This SAE Standard specifies the dimensional requirement of a range of high pressure pipes for use in the bench testing and setting of fuel injection pumps. Only dimensions and requirements affecting the hydraulic characteristic of the pipes are defined. Other requirements, such as the type of end connections and shape of the pipes when bent, are not included. These depend on the connections provided at pump outlets and injector inlets, and on the design features of individual pumps and test benches.

Standard

Diesel Injection Pump Testing—Part 2: Orifice Plate Flow Measurement

2015-09-22

HISTORICAL

J968/2_201509

This part of SAE J968 specifies the flow measuring system, including the fixture, to be used for flow testing the single hole orifice plates used in an orifice plate type nozzle and holder assembly (described in SAE J968-1) which is intended for testing and setting diesel fuel injection pumps on test benches. The flow measuring system and fixture ensure accurate flow testing of the entire range of orifices from 0.4 to 0.8 mm diameter as specified in SAE J968-1. It is intended primarily for use by the manufacturers of single hole orifice plates.

Standard

Diesel Injection Pump Testing—Part 2: Orifice Plate Flow Measurement

2002-12-20

HISTORICAL

J968/2_200212

This part of SAE J968 specifies the flow measuring system, including the fixture, to be used for flow testing the single hole orifice plates used in an orifice plate type nozzle and holder assembly (described in SAE J968-1) which is intended for testing and setting diesel fuel injection pumps on test benches. The flow measuring system and fixture ensure accurate flow testing of the entire range of orifices from 0.4 to 0.8 mm diameter as specified in SAE J968-1. It is intended primarily for use by the manufacturers of single hole orifice plates.

Standard

Diesel Fuel Injector Assembly—Types 8, 9, 10, and 11

2002-12-13

HISTORICAL

J265_200212

This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of four types of fuel injectors in diesel engines. Two of the types specified are flats-located injectors. The location and dimensions of the fuel inlet, leak-off connections, and type of attachment are not defined since they may vary according to the particular application.

Standard

Diesel Fuel Injector Assembly - Flange Mounted Types 5 and 6

2002-12-13

HISTORICAL

J629_200212

This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of two types of fuel injectors in diesel engines. The location and dimensions of the fuel inlet, leak-off connections, and flange design are not defined since they may vary according to the particular application.

Standard

Diesel Fuel Injector Assembly Type 7 (9.5 mm)

2002-10-25

HISTORICAL

J347_200210

This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.

Standard

Diesel Fuel Injector Assembly Type 28 (9.5 mm)

2002-10-25

HISTORICAL

J1984_200210

This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.

Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE 28 (9.5 MM)

1995-11-01

HISTORICAL

J1984_199511

This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.

Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE (9.5 MM)

1995-07-10

HISTORICAL

J347_199507

This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.

Standard

DIESEL FUEL INJECTOR ASSEMBLY—TYPES 8, 9, 10, AND 11

1991-04-01

HISTORICAL

J265_199104

This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of four types of fuel injectors in diesel engines. Two of the types specified are flats-located injectors. The location and dimensions of the fuel inlet, leak-off connections, and type of attachment are not defined since they may vary according to the particular application.

Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE 27 (9.5 mm)

1989-11-01

HISTORICAL

J1984_198911

This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.

Standard

DIESEL FUEL INJECTOR ASSEMBLY TYPE 7 (9.5 mm)

1988-07-01

HISTORICAL

J347_198807

This standard specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.